Silverado transfer case replacement part (1 of 2)
ฝัง
- เผยแพร่เมื่อ 15 พ.ย. 2021
- thank you for watching!!!!!
If this video was helpful to you and if you would like to place a donation, here is my Venmo and PayPal information. Or I would really appreciate it if you could share my TH-cam channel on your social media. Links will be on the bottom.
#silverado #transfercase #jabothemechanic
venmo.com/code?user_id=265066...
www.paypal.me/urbanautomotive - ยานยนต์และพาหนะ
This was BY FAR the best video for changing out this transfer case. Clear communication, thoroughness on showing steps, good camera angles and lighting.
Great post. I will say I was able to pull the transfer case without removing the rear transmission support using a shallow 15mm 3/8 drive socket, 3" extension and flex head ratchet on a 2000 with a 5.3L gas engine.
Hadda go this route no one had the flex head
Where is the last screw ? Was it easy with a flex I’m yanking one from the junkyard
@@tmjs4545What’s a hadda?
Great vid man easy to follow to the point and in easy terms to understand great camera work solid professional you are!!!
The best transfer case replacement video I've seen. Nice video shots and clear voice. Thank you. I think I have the courage to do my own now, and save some money!
Thanks for sharing your how to vid , I'm dreading having to do this to my 99 yukon, your explanations make it easier for unexpected surprises,
Thanks so much for the content!
I have never seen those snap rings come out of the tone wheel like that haha. That is crazy, thanks for the info!
Thanks for posting this..
Great video.. TY
very good tutorial
Appreciate the video you’re great with video
Great video
There was a helpful video.😊
Thanks for your videos
I have a Chevrolet Avalanche 2011 am going to replace a transfer case it’s making noise like grinding it’s no make any shift but needs to be in parking or neutral?
Thanks a lot
If I may...15 Sierra. Humming while driving. Did wheel bearings, new calipers and brackets, pads in rear. My neighbor said my transfer case is fried cause I cannot get it to go into anything but 2 wheel. And I drove by him, he said the hum was mid point of my truck. Thoughts? Thank you
Thanks for posting. You made it look easy.........
Who did you use for the reman transfer case
If my truck won’t go in reverse but it drives in limp mode would that be the transfer case
Great job cheif
I had to cut my bolts for my transmission mount 😂 mines an 09 Silverado and the bolts were horizontal instead of vertical. The exhaust is right next to it so it didn’t have room to go all the way out and would have to take off the exhaust which I didn’t want too and luckily I found some extra old bolts and used the same nuts.
A little late but i had the same issue but just jacked the exhaust up enough to slip the bolt out then once down i flipped it around and put it back in on the other side
is that large gasket the only seal between the transmission and the transfer case? im certain mine has gone bad as its leaking from that spot. thanks! using this video i think im ready to tackle my leak tomorrow!
23:58 got me chuckling😂😂
How similar is this to a 2007 Yukon?
I bet the reason why that's dry was the pump inside was rubbing against the case, and wore through, leaking fluid, little by little. Common problem
with NP transfer cases.
Did you actually get the warranty on a case that ran dry?!?
Please replace the batteries in your smoke detector lol
Any idea how close this is to a 98 Tahoe? Mine blew out yesterday lol
Well you can see he's got more hand room the 98 has more shit in the way specially the front driveshaft its not real good hand room on the 98 ones but once you break out one u joint it'll slip off then
For a nissan ad wagon expert 2013 4 wheel drive which oil is the correct oils for the overall car from engine to transmission to rear differenal and tranfer case etc please.. I don't have the car manual
brother you can find everything you need online. just look up "nissan whatever diff oil, transfer case oil, etc.
@@lee4macsHis google is probably broken.
Are the milwaukee tools your using 12 or 18 volt ?
the gun looks like a 18 volt. the 12 volts are the smaller batteries. the 18 volts usually have the bulkier batteries. It also says M18 on the battery which is their 18V series of tools. :)
Ours already had been replaced before from what i seen im gonna unhook it and just have 2wd
19:13 if not for this video I'd have spent another few hours trying to find this
are all transfer cases for the 99-06 GM 1500 trucks the same?
JB this you?
@@bigsilva1596 ??
No they’re not, your transfer case has a tag on it with a number , you need to find one with the same number , usually a small circular red and white tag
@@Caseb711 Thanks. I ended up figuring it out after watching some videos. My case housing cracked and I needed to find a replacement and wanted to make sure different cases would work. I got lucky and found an entire working transfer case (supposedly) for $100 on marketplace that matched my 246 case #
Probably not like on his he got plenty of hand room the old model trucks got less hand room and more shit right in the way the plate under his trasfer case is the same though on the 98 his frames a little different though and mufflers who put headers on ours fucked it up cause that pipes in my way and all in the way of taking out the spark plugs
Where are your jack stands?
Why does he need jack stands
There called needle bearings not roller pins
Oh well thats what happens when people sell a truck with no book with the truck if we knew we'd put oil in it
Who’s we?