FLOODED and ABANDONED Ford 600 will it start??
ฝัง
- เผยแพร่เมื่อ 29 ก.ย. 2024
- 1970’s Ford f-600 abandoned for 30 years gets revived after suffering multiple floods.
Like and comment.
More to come
JESUS IS KING 👑
Ig: braden2201
Bradenbuildz
Sc: braden2201 - ยานยนต์และพาหนะ
I would have bet my farm that the engine would have been locked up. Good job!
Thank you
I would have bet my sister/mom’s knickers you voted for trump..
most people wouldnt even attempt to save this.. awesome job!
Thanks, for sharing
Bright future for this kid
Thank you
Excellent job!
WOW! THAT is one of the best will it run videos Ive ever seen! Keep up the great work! Can't wait for the future videos! Subscribed :) The whole time, i was yelling at you about the oil, very happy to see the drain pan when you got it home ;) Is it making any oil pressure?
Absolutely awesome content brother!!! This channel will take off 100% just keep the content coming!! There's a massive fan base for this kind of stuff on TH-cam but you seem to add that extra something which is what people will gravitate to!! I found your channel today and I've been binge watching since. Lol.
If you get that truck running and idling on its own (without the aid of starter spray) I'll eat my shorts!!
Thank you. It’s comments like these that make me start flooded trucks in the dead of winter
I hit rewind like 15 times on you falling at the beginning and laughed until I teared up... Holy crap so funny
I'm amazed the truck isn't covered in rot considering how much time it spent under water. The wood in the box even looked fine too! I'd say turn it into a camper or sell the box and turn it into a cool rig, I'm sure someone would want an old truck box. Awesome vid tho!
Is there a part 2 for the truck would like to see it
How many times did you start it before it idled? Love the dedication , trying to get stuff done while flooding was happening. You got some cojones kid!
All on video. It pretty much idled right off the bat
Perfect truck for a 7.3 or 12v swap cut a couple feet of the frame behind the back wheels through a flatbed on it and have a badass all round truck
I was anxiously awaiting the largest ether backfire in recorded history. Glad you missed that one. For future reference, a less volatile option is a soda bottle full of gasoline with a nail hole through the cap. A steady drip keeps most things running while you bumblefuck around.
Definitely would want to see a part 2
Geez Louise put a breaker bar on the crank bolt and manually spin it before you burn up a new starter
If it's cylinders and rings weren't bad before they probably are after all that continued starting fluid rather than gasoline. Either isn't cylinder friendly
Definitely want to see this truck drive on it’s own.
Definitely an old FE Ford engine. If the engine can survive that, I'm sure the trans probably did too. Not to mention the rear tires were turning so it's not locked up. As long as the clutch functions she should shift. The front wheel bearing could be fun, but probably will turn out just fine. I would keep it mechanical on the fuel pump, and freshen up the carb. Maybe put a Edelbrock intake and a 4 barrel carb on it just to squeak out a little more horse power. All things considered she sounded healthy. That old Ford just said fix me I still have a lot or work yet to do. And it would be a bad ass camper. Parts aren't that hard to come by once you have which FE she has in her. Summit Racing will have almost everything if not everything to completely overhaul and tune the engine.
Nice to see a good young man getting his hands dirty and wanting to work on vehicles that's awesome keep doing what you're doing
man i bet that starter was heavy , trying to hold it with one hand in place and use the other to try and thread in the bolt, you have my respect! still cant believe you got it to fire!
That's either a 360 or 390. You can find specs on those engines. Parts are very easy to find also and cheap. Look up the numbers on the bottom of the block. Also sometimes you can find information stamped near the valve cover.
I was thinking of the Ford 351 Cleveland motor as opposed to those 351 Windsor models. Worked on both back in the day. The Cleveland would kick major ass.
It's neither a 360 or a 390. Those are Ford FE engines. That's a Ford FT engine. The FT is the same basic architecture as the FE but has a steel crank , large snout, low compression and some other significant differences. They are low revving, run all day for years industrial truck engines.
@@theoldmanoftech4039 No Cleveland was ever used in a truck from the factory. A 351 M and the 400 had similar heads and block architecture. But they are low compression emissions oriented engines. Cleveland were only produces for 4 years for good reason. They did produce good power depending upon what Cleveland model used but they all suffered from oiling problems that cause premature bearing failure . The Windsor series sbf engines are significantly better but suffer from poorly designed heads from a performance perspective. Too small ports and valves . Hard to beat the FE or 385 series Ford's
@gorilla cookies my 78 f100 has the same valve covers and it’s a 400m
And you are very right about low compression oil pressure is very low in it but I daily drove it 60 miles plus and besides being powerless it got me every where when it wanted to behave lol
I'm not going to lie, I love this. Clean this thing up and show us.
I drove a similar F-600 in the early 80's for a food distributor. 360/4 speed. The company had many newer trucks, but that one was my favorite.
I have always liked the Fe Ford engine but now I have new profound respect for them I just can't believe it ran
That actually is an FT engine.
Awesome video. I watched the whole thing. You working in the rain all day and night without having to be made to do it really gave me a little hope for our future lol. And that tractor snatching that truck out had me tensing up like I was behind it pushing or something. You totally earned my sub. Keep up the great videos and I'll keep doing my part and one day we'll make you YT rich 👍
I just came across your page and this video pretty awesome. It’s cool to see young men take interest in restoring a old truck. I enjoyed watching videos and these guys just earned a fan a subscriber
Great video man, I love your style and execution. I love wrenching on cars, and I’ve been out there in the rain and snow all alone so many times. It’s something we all share as mechanics, and there is a certain beauty to this hobby
Takes me back to when I was that age. We did this all the time. Self taught mechanics, way before the internet. Good times and great video!!!
Yall did an awesome job!
And when yall were pullin up to the truck, it gave me massive snowrunner vibes
Amazing content bro keep up the work man. It really amazes me how good of a mechanic you are just love it👨🏻🔧👨🏻🔧👨🏻🔧🦾
Lol you obviously thought it would run to buy the parts I was going to bet I could start it from growing up doing this kind of stuff with alot worse looking to start with but it's awesome to see a young guy doing it now days those old fe motors will take some abuse and keep on going great video glad to see you cut the belts and address the wires just rebuild that carb throw a gas can under the hood to the fuel pump and fire it up your so close also get some water in the radiator and see if the water pump is working and put a new thermostat in it and you'll be doing burnouts in no time awesome video thanks for sharing
So what wound up happening to the sweet old box truck?
Hey man great video! Glad you found my post on Facebook about the starter! I know I went through hell trying to find it 😅 (Nick Hooks)
Ford 351 M400 maybe if it's not a y block but I don't think it's it looks like a m400 they good motors the top end rattles bit but I had a cop car from 74 l.t.d gave 150 bucks for it had that motor and it was fast as hell after frist gear had a 2 speed auto loved that car
Please tell me you’re doing a video of it running on its own and driving it. That would be cool. How long was it sitting there for? I’m shocked you freed that engine up
I know that it was at least 30 years but could have been a lot more and most likely was. It’s been flooded at least once every 2 years if not more and at one point the whole truck was underwater
@@BradenBuildz I’m shocked that only one wheel was locked.
i hope your content doesnt change, you have an actual story and i feel the grind with you
its awesome, dude
This was awesome to watch and I love that you are also a Christian and good job doing this bro, thought it was just a piece of junk! God bless brother
Love the little comedy skits in-between the informative content, really kept me interested, The gun persuasion one got me the most
Great video! I came across the short and had to see if that old beast fired up! I really liked how you gave a shout out and thanks to everybody that helped you along that way. Great content
I seen your TH-cam short on this 1st. So I had to watch! Great job and determination on getting that old truck running.
Did it ever get to run on its own?! I never found a part 2 😢. Great video just wondering what happened to the truck now.
How does no one know about this kid yet? 10 months ago? Damn bud yah should be out there like VGG
Part 2 when??? 1st vidoe I've watched of your's. Id love an update
He'll that aluminum box is worth a lot knock all the metal off it and take it down to sale at the junk yard that's a pretty penny 👌
I’d be proud of that! Great job, got my sub!
Would you not power bar hand crank it before trying to turn over with the jump leads
Good too know it was kept up well and had the water changed once a year 😂
Way to go bro! Never give up. 👍
Damn boy you had to work hard for that, great job!
If you have not found Vice Grip Garage by now, you really should.
Homie was dedicated Fr, in the rain, in the snow, at night, DRIVING THRU S FLOOD 😭
So what happened to this old truck? Do you still have it, or did you sell it?
Making My Daughter watch this, you go Thru the Correct Inspection and Repair Process I would Teach anyone. Good Job, keep up the good work and please turn down the background music. I’m interested in what your saying not the Jam of the Day
Some reason the music gets amplified when I download the video but my newer videos I think are corrected
Is there a part two yet? Wonder if you rigged a gas can and and a new pump on it so it could idle on its own power
oh damn... bonus fall at the end... Way to stick it out buddy. It was a job well done. Liked Comment and Subbed
💪💪💪👍👍👍
I melted the head off a pair of cables doing the same thing with a tractor!🤣🤣🤣🤣😎
you guys are going to blow up in no time , great content 👌😂
With that much starter fluid, I’m amazed they haven’t already
Nice pun 😂
Great video ! Glad to see that old truck get brought back to life again. Makes me want get back to work on my 79 F150 4x4.
Kid,you got skills. Stumbled upon your stuff and been watching ever since. Keep it up.
Can’t believe it wasn’t totalled , amazing if the water is pure ie no salt that it can be saved
Some one has taken the time to lurn how to turn a wrench .good job
Impressed with this young man...good for you
Came here from shorts cool chanel
Need a part 2 please
Good shit man. As a Ford guy and someone who grew up doing this sort of thing. Keep it going man. Can't wait to dive into more videos
This is insane
I'm simply in awe at your dedication.
Will I subscribe to your channel I hope you keep doing that kind of content I like to watch the will it runs and watch him go out in the woods and get them unstuck and get them going and drive them out under their own power and apparently there's a lot of other people
I'm surprised it started great job! talk about bringing back from the grave lol 😂
watching people fall over never gets old
Wow
Man I can’t even believe that it’s running!!!
Awesome work !!!
If you got here from shorts and hate tik tok👍
I think a new one of those back when they made them was about $3,600
In Germany we say Umweltverschmutzung..
Great video fam! Got yourself a new subscriber, is there a part 2 for this bad boy?
That’s either a 360 or 390 fe engine
Or a FT
The ford fe cannot be killed I swear
Slow clap young man. (Wipes away tear) that was beautiful. Good for you dude. Your doing awesome stuff
Hook up a fuel system to it and let’s see it drive!
I’m proud of you little dude
Just saw your post on the fb group nice job
When will part 2 be available?
Just like the Missoula floods of 11,000 BC and before! Google Nick Zentner - a geologist from I think Eastern Washington State College or somesuch;
Awesome job guys keep the videos coming!!
Well, I am thoroughly impressed!! I didn’t think you’d ever even get it freed up, let alone started!!
Need to get some battery lights man. Harbor freight, if you have one near, has awesome battery mechanic lights at a decent price. The power of WD40 is amazing.
Please be careful with those wheels and tires just airing them up. Could kill you they’re split rims. They call them widowmakers
😂😂😂😂❤️👍
Part 2!?!? Fun vid
3:59 in the 70s it was probably a 460. Emissions standards killed the 429 so they tried to make up for it by boring it out. They also kept the pistons WAYYYYY below deck. They’re super low compression engines. They can be made to be good, but y’knownits a smogger
Where is part two?
You need to get you one of them Lonewolf starters like Derek on Vice Grip Garage, good work though. 👍
Nice and funny! 😂
I'm guessing that's either a Ford 390 or 391 (for trucks) big block.
Bro when you ate shit I lost it so glad you left it in there def gonna subscribe where you are now is right about where VGG was when I subbed to them just need to put out more vids and keep us up to date in this truck
I’m blown away, you have earned my respect and a subscriber I’m a Kentucky man too
Great video, change your oil 1st next time & it won’t be so much trouble to get the water outta the cylinders
Where is part 2
Great video, love you bro your personality is everything ❤
Preciate it bro