You Might Hate The Reason We're Building This Dump Bed.
ฝัง
- เผยแพร่เมื่อ 3 พ.ย. 2022
- #fabrats #fabrication #diy
Today we're helping out our nephew with his truck. We're putting a dump bed on it, to make his job a whole lot easier. Check it out!
Make sure to follow along with us as we build and fabricate cool stuff!!
We LOVE Onx Off-Road! Get 20% by using code FABRATS20 or click on this link:
webmap.onxmaps.com/purchase/o...
Get your own Fab Rat's Apparel Here:
www.thefabrats.com/
More Videos You'll Love:
Some Big Improvements Are Happening at Fab Rats!
• Some Big Improvements ...
THIS might be the FUNNIEST Oil Change on the Internet!!!
• THIS might be the FUNN...
We're Definitely Not In UTAH Anymore! What Did We Get Ourselves INTO?!
• We're Definitely Not I...
We Found A Nasty Surprise In The Seats Of The Firebird Barn Find.
• We Found A Nasty Surpr...
We love Barnes 4x4. Check them out!
www.barnes4wd.com/?ApplyPromo...
Check out Fab Rat's Recovery Gear by Yankum Ropes!!
yankum.com/products/fab-rats-...
Use coupon code FABRATS at checkout to save 10% on your order!
Follow us on Instagram: FabRats
And THE FAB RATS Facebook page: / thefabrats
For business inquiries please email us at: thefabrats@gmail.com
Shipping Address:
Fab Rats
P.O. Box 234 or General Delivery
Glendale, UT 84729 - ยานยนต์และพาหนะ
Paul & Ben are the ultimate problem solvers!
Am I the only one with rusted wheel arches drooling at the condition of that pickup truck bed that they took off
Never doubt that a master fabricator can marry a international bed to a Ford truck to a Chevy lift and make it work on the fly! Paul you are a master. and along with your brother Ben, the challenges Fab Rats sees on a daily basis will be met and conquered! Any company would love to have Fab Rats on their team! Thank you all for your sharing, thank you Michelle for your expert editing! I can hardly wait to see what comes next...
"Dumping guts" is what I do halfway through my first cup of coffee in the morning.
Paul’s kit instructions, cut this , channel this , chop this , weld this , tie wrap those , add power , fluids, lights . Now she will work . Just as I pictured it . Thanks for the gut dump video :-)
I was screaming at the TV, "nooooo don't weld that!" Lol. The frame you had going forward actually goes underneath the lift to hold it up at rest. You put the lift in place and let the bed all the way down before connecting so the lift rests properly. Did a lot of these back in the day including a pto wet kit.
xactly! ...
@Jim Omega yup sorry. But now that I think about it not being a right angle, it would be Sines. Back in the day we just made chalk lines on the ground and measured it.
Just me or did they loose some of the lift height capabilities of it?
@@jeepscotsman6242 its possible if it was mounted too far forward.
What I’ve learned watching FabRats for a while is that you all pull old trucks out of the scrap yard less rusty than any two year old New England truck
Don’t forget to add a safety bar so your cousin can have the safety feature that will save his life.
When Paul says, "Real Nice, Clark." he is quoting a specific movie. But when I hear him say it, I am always reminded of another quote.
Who remembers and can name the movie, "That's Clark Nice."
It appears any kit that comes into Paul's shop is a universal fit. His first step is always to throw out the instruction book!
Instructions are for Firestarters hahaha 😆
That's so true he is so handy at what he does
@@danielstevens3372 true he love to burn the instructions
And proceed to screw it up and take longer to figure out that he's doing it wrong then it would take to briefly read the instructions in the first place.
Well instructions for the wrong truck aren't going to be very useful!
The ‘HI YAH’ made me think of Randal. He may be gone but not forgotten. How’s he doing? Has he stopped by? If he does I sure hope you get him to make a cameo.
Paul never ceases to amaze at his off the cuff “ratgineering”! Nice job, that would be a fun/handy truck to have around. I was surprised how much weight it could dump.
“ratgineering” looool, THAT should be on some T shirts....
While I like ratgineering, I think Ratrofit is just a little better.
@@lylehuber1466 🤪
Im surprised people even question your fab work. You're always explaining how thing's are going to work, and they always do.
I can tell when Paul is working working and when he’s fun working. This is a working working video
What the mind of a man can perceive, the minds of Paul and Ben can achieve!
Should be a handy truck!
Nothing wrong with a meat wagon ... we all need steak and burgers!!!
I was hollering at my phone when you welded the scissor to the frame ... you must have finally heard me!
Thanks for sharing 🇨🇦
So JD and Darr are the B team. You're in trouble. Lol God bless
amazing mixing of the non compatible parts to build a POWERFUL lift... success
Who needs instructions. It a fab shop. Make as you go.100% love the channel.
“ That’s an R V…..really nice! “
😂😂 One of my favorite movies!!
The mission of the fabricator is to fabricate. But I think physics come into play when installing a dumb bed. And there's no sense in fixing a part that is connected thru hinges to another part. But , again, the path of the fabricator is mysterious! 😁
“The truck tumps” literally and figuratively cause it a Ford.🤣 great work as always.
That shower of sparks raining down on the gas can at 17:45 made my heart stop. Holy smoke Paul, you are living on the edge. Oof.
The shop expansion should have a taller door than the present ones. Bring on the Yellow!
Trailer hitch (fifth wheel) - Heavy cross piece above ram that clears. Vertical side mounts down to heavy cross piece under the ram. Vertical heavy have welded pins that fall into the bottom vertical heavy notch. Rotating latch that connects the upper and lower heavy plates. Latch handle that locks the latch in open or closed position. Closed when hailing a fifth wheel. Open to use the dump bed.
We have a highway that runs through our town with three or four stop lights. We had an overloaded gut truck lose a bit of its load every time it took off from a stoplight. A little stomach here, a little intestine there, even a few skull bits. It was the crime of the century in our town, according to some of the easier offended.
It's a winner! Making dump beds always looks so complicated to me. Good job. Good to see Papa Darr hanging with you!! I know he comes around often enough, but I just wanted to give him a shout out!!
YEE....
HAW....
I'd have to say,
That magnet light has been with you from the beginning and a very useful tool for sure,
It was one of my first episodes I watched and I'm glad every time I see you use it.
Food for thought 🤔
Next time, instead of a cissor lift ram,,, use a telescopic cylinder in the front of the dump bed,,, thus leaving room to put the gooseneck hitch in the correct spot!! 👍👍
I had an 81 Chevy truck set-up this way worked like a charm👍
That old bed is worth some coin here in Michigan. I have seen them bring $2500 for a clean rust free bed.
Hadn't heard you quote Cousin Eddie in a long while...happy you brought him back.
Grandma lolley is a saint always making sure her little boys are fed and even gives insight on projects but we do know who the favorite is he's just a little shorter than the other one of the best things about this channel is how its a family operation glad y'all work together an don't let BS get in the way
Really nice fabricobble job on the dump bed Paul. If I was your Nephew I think I would nickname this truck: "NO GUTS NO GORY". LOL
with the value of the dollar the Barter system is much preferred!
I need you to make me a dump bed for my bedroom that dumps me out of bed when the alarm goes off. Great video as always!
When you said stack some wood on it . Those are logs 🪵 😂😮💯
I think the night crew replacements just smelled Moms cooking 🥘 and came for leftovers 🤪
Oh, NICE JOB on the dump bed Guys 👍🇺🇸
I think I'd put a small apron on the back of the bad if not his license tag and everything in between will be covered in blood and guts. IMHO lol. Love the vids great job as always.
Having a Butcher in the family is a good thing.
I made a flatbed with side skirts and now I want to build me a dump bed. Cool project.
Man my parents ran a greenhouse from 96 to about 2003ish I unloaded alot of manure with a shovel in the first couple years, and a dump bed in our old dually was a life changer. Not a bad idea to keep your local butcher happy. I bet it leads to a few tasty meals.
Combined with an ample supply of wood chips, those guts could make good compost
I had the unfortunate job at one point of disposing of dead animals from vets in a tri state area. fortunately they were wrapped and frozen when we got them but by the time we got them to the burial pits and cremation urns back home well, they were not so frozen. Having a dump bed was an absolute must.
Watching a truck on the chopping block is worth watching
That truck looks good with that old flat bed on it
15:15 into the video... PERFECT Christmas Vacation reference 👊👊...your pappy would be proud of everything you have become and continue to be..
Yer custom fabricating is a true art-form... well done!
The lack of rust on these Western trucks is amazing! This same truck kept outdoors in New Jersey would have dissolved in a pile of corrosion years ago.
Build rugged hinges and make a lock for front of body. I hauled 12' dia.x 36' fiberglass tanks out of Canada to Maine and New York, 12 of them.
Looks like pauls gatta spend a whole weekend organizing and scraping stuff from his yard😂
I don't hate the reason for doing the bed... I just think there is potentially a lot more your nephew can do to make better use of the carcasses... Like boiling the bones down to broth (and maybe dehydrating that into bullion), stripping the remaining flesh from them, then crushing them into bone meal fertilizer. Processed deer hide becomes buckskin leather, etc. The need for a "gut wagon" just indicates he has yet to fully explore making a potentially much more complete use of the animals.
The way you jump that old Ford truck reminded me of a movie called Mr Majestic. Charles Bronson (Mr majestic) beats the crap out of an old Ford truck great movie lots of watermelons involved
Ya know something ? We had a real yellow submarine here at Intermediate Lake @ the Chain "o Lakes Antrim County ,Michigan. It was made from a 500 pound propane pig and was taken under water several times by it's owner, it was illegal as hell and he was ticketed by the Antrim county Marine Officer, it eventually got scrapped, but he was the talk of the county for years,LOL.
Fun one to watch! I appreciated the part where Paul added the square tube support saying, "I don't want to die today." A well-known local heavy equipment operator died about ten years ago when the hydraulics on his dump truck failed while he was working under there. That was quite tragic.
After Paul's project was finished, I couldn't help but feel like there needed to be either fenders attached to the flatbed or some sort of protection built around the hydraulic pump and reservoir. It's looking awfully exposed under there!
When you're not jumping trucks....you can do a lot with a small excavator! Just like it was made for it! LOL! You got any Fab Rats welding masks for your viewers???:)
Papa Dar brought the whole story full circle about the history of the bed itself. To be sentimental, I see that as real local community legacy. Well done Paul!
Paul am I the only one to notice that Clark Griswold's cousin Eddie line? "That will be real nice Clark" You sounded just like Randy Quaide. LMAO.
Paul, if you had turned the scissor lift around the other way so that the middle hinge point was towards the cab, then you could have still used the hole in the bed to mount a gooseneck ball on a plate under the flap. Also, the other piece that you welded to the frame in the front looked to be a stand up safety lockout to brace the bed up when it is open for maintenance.
8:04 Watching Fab Rats makes me so hungry! Every video 😂
What a joy to have a well equipped shop and outstanding assistants.
Nostalgic for me.
Dad had a fleetside dump bed on a 70's C 10.
A Victory Gardeners old truck.
The look on people's faces when he had to tilt the bed to put gas in that beat up old truck is so memorable.
I'm sure you know what disbelief looks like on people's faces, it's priceless.
Great‼️ Now I have the "Yellow Submarine" song stuck in my head.
Did you put on a permanent safety bar like the one you used to build it? I recommend you do this and put it on the same side as the motor so no excuse not to use it when servicing the truck ... This is my go-to U-Tube channel it is so much fun to watch! thank you (also I hope that is not a "welders" cough? that needs to be looked into if it is)
Your families continued ability to make me feel like I am just hanging out with my family and close friends with every video is unsurpassed. I feel at home every time I press play. Thanks to you and yours for this consistently amazing content.
I noticed the chubby son is grammas favourite. Cause before he was on the channel Paul survived on jerky and Mountain Dew.
You had me worried there for a few minutes when I could see the initial geometry was way off! In order to directly bolt the top of the cylinder to the bed, the pivot point of the ram on the chassis would have had to be exactly in line with the pivot point of the bed to the chassis at the back. Your ram's pivot point was way forward, so you had to have that scissors link to allow the difference in length as the ram raised and lowered. Good job on figuring out a workaround that did a great job!
God Bless Grandma!
She looks after them boys.
Heck yeah nothing like a good trade with the butcher! Most of them are a good friends to have!
Can't wait to watch the cheap truck challenge !
I like the looks of those Juniper (cedar?) logs. If you're looking for content for your oldest to start his own channel, how about building a sawmill and slabbing some logs?
I can see the wood truck getting a scissor upgrade
So that's why they call you "Fab Rats"! LOL Great job.
I took a Ford flatbed and put it on a GMC. Welded the gooseneck to the bed. Used a single cylinder to lift the bed. Had a bad day and jacknifed it with a mini ex on it. I didn't bend anything. Works great
Hoping the yellow submarine is the jeepster project 💛
Glendale Gut Wagon. Kinda has a ring to it.
I am telling you Paul is one smart guy !! His fabrication skills are outstanding!!
The FabRats Install-your-own-dump-bed 101:
Step 1: Weld this to that.
Step 2: Done.
😂😂😁😁😂😂
I once jumped my '66 F100 and got some serious air. It had a 240 straight six with "three on the tree". :)
In Australia you'd be described as having a can do attitude,nothing phases you,or at least nothing appears to be a real big problem. Excellent,and to me it's just an extension of someone's toolbox,could be worse,could be an effluent carter
I cant wait to see the budget wheeling truck.
I was screaming at the screen when he first started welding on the hinge mechanism, "It's a double hinge lift-kit!"
I was trying to understand what he was doing at first, but he figured out. Would have saved some time reading the instructions beforehand to understand how the lift-kit worked.
Dumps like a truck, sisqo is so proud
Good job reworking it so it works.
I've never commented on TH-cam before, but watching you install the dump ram wrong, actually hurt. Lol! Thanks for the entertainment.
It's amazing how much power that cylinder has
The only thing it needs is some back up lights and maybe some work lights on the headache rack. Great work!!!
Good idea and reverse camera.
Also needs amber side marker lights on the rear.
Paul and Ben does it again making this dump bed for his buddy. Works great. Good to see Papa Dar and Grandma Lally bringing the boys lunch! Love this channel!
A gut wagon - gooser... that should be fun!
Merci Paul&Family! Greetings from the Normandy.
Never ceases to amaze me how all of you Utah based TH-camrs don't put back-up lights on any your projects.
WOW, I am impressed more and more with your imagination and ingenuity!
Good morning and happy Friday Fabrats!
I installed a Pierce onto a 2015 F250 fro my father-in-law. The 'bolt-on' kit was not a bolt-on, by any means. Also, the Ford bed would flex badly (floor bulge) due to the POS aluminum construction of Ford. So we had to basically build a skeleton underneath the bed to support it. Otherwise, the pierce frame would've pushed right through the floor, first load it tried to lift.
The rear bumper was also iffy, from a safety standpoint, once the kit was installed.
Always fun walking underneath a raised truck, 45,000 lb vehicles are more fun
Very interesting Adaption of Miss Match Parts ! Great Video. Thanks for sharing !
You could still mount a Gooseneck ball/ 5th wheel hitch if you just weld on some flanges on the front of your bed so that you can pin the bed shut.. He would have to pull the pins to dump it; But normally you would just leave the pins out, and then only put them in when you needed to tow. At least that way it would secure your bed for towing when you needed it to. I think it could be done fairly easily.
You don't install a goose-neck hitch on a dump bed! it just does not work.
I had a 91 f450 dump truck that was that way with the pins in front of bed. Little annoying taking the pins in and out but it made the bed solid. I would tow a 12k backhoe with it and never had a single problem with it.
That true "fab ratting", good show y'all
I converted my old yard truck to dump, I'm not sure if I can live without it that is one handy rig.
I found a coworker in his shop killed by the one dump brase. A locking brase on the outside of the frame. Never work alone I've seen 6 garages burn to the ground through the year's. Spirit be with y'all an God bless all
I thought my family was the only ones that used Christmas vacation quotes year round. You guys are the gift that keeps on giving.. the whole year.....
Truck jumping, just a casual remark, 1:42 ,“…jumped that old girl, a lot..” I would love to know the genesis of this “sport”, I can hear Paul, “Wouldn’t it be cool to jump this truck? Kinda like Dukes of Hazard? Just finding a suitable spot and then making the first attempt, I’m sure there was not much JSA going on. Amazed how well it jumped, apparently able to survive multiple flights. Perhaps the most amazing was the foresight to get it on video. This would be an excellent “back in the day” side video story with Paul and Co. filling in the details.