Hello from a very good customer of Dave Andrews archery in pa , Long time exclusive dealer of Mathews bows. Its the only bow i shoot these days . Last 20 years 😊 Mathews # 1 ❤
Thank you for addressing the strings! I was one of those customers going aftermarket for the last 3 bows. I got to shoot the demo models yesterday and put in an order an earth fade to black 33”. Now I’m going to be eagerly awaiting that phone call this spring. Thank you for doing what you do.
After shooting 1 brand for 27 years I made the switch to Mathew’s last year. Best decision I ever made. To all at Mathew’s thank you for all you do for us ❤
Been shooting a vertix and been wanting a lighter bow from yall and almost got the phase 4 since it was something really new but now sub 4lbs definitely a game changer in the mountains can't wait to get my hands on one
Went in looking for my first compound today and had my mind set on a Hoyt alpha x, shot it and just wanted to compare while I was there to make sure it was right for me… then I picked up the Lyft. One shot with it and I was immediately sold. Great job guys this thing is out of this world.
I still have one of their first bows the 3-D hunter. Fun to pull out once in a while, but I’ll stick with the most up-to-date. Matthew says redefined smoooth!!
Just purchased the Lift 33 fade to black earth last week after looking all over for this color. Mated with the UV slider and Hamanskea epsilon I love it
Love this video. Looking forward to seeing the same video but with the 2025 flagship. I love my lift 33, going to put some deer down this year and Jan is a couple months away and we will have some 3d shoots to have fun with. Love the bow and everything you guys are doing. Great bow and awesome accessories.
@@owsowmuskwanaistus9213 I’ve owned three Mathews bows from new and gave the stock strings a fair try each time and the cables would stretch after 50 shots and need adjustment. Hopefully the match strings can beat that
I watched people shooting the LIFT at an archery shop. There was a guy shooting a Phase 4 near them. The Phase 4 sure sounded more quiet than the LIFT did. The LIFT they were shooting was all decked out with a stabilizer, etc. ( I think it was the factory demo setup sent to the dealer, fully equipped). The Phase 4 was equipped similar and it was easily more quiet. Also, the guy shooting the LIFT said the draw cycle was very heavy at the front end of the cycle. Very interesting! I have not shot one, just sharing what I have seen so far. My dealer said all of the LIFTs so far have come in really heavy in terms of draw weight. With a 70# mod they are drawing close to 75 lbs, etc. Another interesting point.
Same here. I was pretty close to throwing down for the phase4 but I got busy…and now hunting season is on. And now that I’m seeing this I’ve forgotten all about that phase4. I wasn’t sure if they could come up with viable changes for this year but they always come up with something and this time they really went beyond
Ordered the lift 33 yesterday I’m very excited! Got the green ambush fade to black 😎. However they claimed my draw length is 2 inches shorter than I have measured a couple different ways. Will I be able to adjust it to give me that extra length if I want it? I’d hate to lose the extra speed if I don’t have to! I’m 6ft 2in with a wingspan of 75.5 inches but they claim a 29 inch draw. I had myself at 31. They charged me an extra $50 for an OD green twist so I’d hate to wait months and then it not fit me right! Thanks for any advice or knowledge you can give me on this issue!
We're stoked you liked the LIFT. Our mods are specific for one draw length. If you would like to accommodate for a longer draw you can always use a longer d-loop or switch mods. We appreciate the support.
You guys should have put this on your website before now you had the title target bows on there I was encouraged to wait for the new ones to come out and went home looked on the website to see what they looked like and couldn’t get anything but the title bows I got anxious and bought my Phase 4 I’m super satisfied but I would have liked to see something about it on the website Best bows on the market bar none
Still has the Chinese bearings. Same as my VXR. That FAILED in 3 months. And Mathews blamed it on customers over tightening the axle screws. 25 cent bearings on a $1400 bow. I’ve got a suggestion. Since Mathews likes to use 3 letters like VXR. Next bow… Bowtech. Superior engineering.
My lift made a popping sound at full draw after inspection my top cam bearing is leaking grease after only one month of shooting it well took care of to I’m highly disappointed in that bow took it to the bow shop and the bottom cam popping also I want my money back should have went with the Hoyt rx8
All sounds awesome except it doesn't look like you have changed the grip, that's the only thing that keeps me from shooting Mathews is the grip sucks, until that changes I'll be sticking with my Hoyt, and yes, I have looked into aftermarket grips. I do hope that it changes because I really like everything else about it, but if it's not comfortable in the hand then I'm not gonna shoot it well. Very nice job on all the other stuff though, keep it up!
The technology is pretty awesome, but it’s too bad that hunting has gone in a direction that is so cost prohibitive to the hunter. It’s becoming an elitist sport. I still go out in my grandpa‘s wool rich coat with his lever action 3030 once in a while to remember my roots. Hunting was to secure food for your family, not to prove how cool you were.
Nice bow but for $1429 +tax. No thanks. 😂 I’m not going to drink the cool aid. I cut my teeth with a Mathew’s but have moved on. The VXR is the only one I kept. Bowtech is where it’s at this year. Hell last years Ss34 still beats this one.
Hello, dear Matthews official channel, I am a Chinese player from the other side of the ocean. I like your products very much. It is because your brand has archery. I just bought your new Matthews. As a result, the seller gave me the G of the saw module and my saw module is J, so I can't use it. I asked around that there is no J saw module in China. I would like to ask if you can contact me and send me a J saw module. Thank you very much.
Thanks for your support! Please reach out to our customer service department for any questions regarding orders or product inquiries. www.mathewsinc.com/contact/
All good except the specific mods. Requiring new mods every time you want to modify your dl (due you changed your release or want to try a different anchor point) or your let off is so obsolete... I don't buy the "efficiency" argument; speeds are similar across all brands. Also: for when a replacement for the Atlas? That thing is 3 years old and lack the Stay Afield System, the integrated rails for the new stabs and accesories, the new cams ands axles... Everything!
Bummer! Mathews needs to go back to single limb solo cams, what they do best. These new dual cam split 8 limb bows are trash especially with the bad grip. Smaller brace height is garbage. Picked up an old used Mathews Z7 for this year and shoots like a dream and is dangerously smooth. Wish Mathews wasn’t going in the wrong direction with their bow builds!
Anything post No-cam is far superior than their solid limb single cam bows of years past. Since 2016 the gap between them and the competition has grown tremendously. It’s too obvious how most all companies copy Mathews now.
Was most curious for Mathews 2024 bow. The phase 4 completely changed bows. And it seems liked the lift is even better. That's pretty awesome
Hello from a very good customer of Dave Andrews archery in pa , Long time exclusive dealer of Mathews bows. Its the only bow i shoot these days . Last 20 years 😊 Mathews # 1 ❤
We appreciate all the support, William. Glad to have you a part of the Mathews family. 🤝
@@MathewsInc You bet guys.. back engineering from alien space technology . Love Mathews.
Thank you for addressing the strings! I was one of those customers going aftermarket for the last 3 bows.
I got to shoot the demo models yesterday and put in an order an earth fade to black 33”.
Now I’m going to be eagerly awaiting that phone call this spring. Thank you for doing what you do.
We're stoked you're loved the new LIFT. We appreciate the support.
Atta way @elkshape! love seeing Washington State represented! Looking forward to shooting this bow and seeing how smooth it shoots.
After shooting 1 brand for 27 years I made the switch to Mathew’s last year. Best decision I ever made. To all at Mathew’s thank you for all you do for us ❤
We're stoked you're loving the equipment! We appreciate the support.
You’ll regret it
Been shooting a vertix and been wanting a lighter bow from yall and almost got the phase 4 since it was something really new but now sub 4lbs definitely a game changer in the mountains can't wait to get my hands on one
Went in looking for my first compound today and had my mind set on a Hoyt alpha x, shot it and just wanted to compare while I was there to make sure it was right for me… then I picked up the Lyft. One shot with it and I was immediately sold. Great job guys this thing is out of this world.
Stoked to hear you loved the LIFT. We appreciate the support.
Would be freaking awesome if mathews did a tribute to a single cam with this riser
I still have one of their first bows the 3-D hunter. Fun to pull out once in a while, but I’ll stick with the most up-to-date. Matthew says redefined smoooth!!
Just purchased the Lift 33 fade to black earth last week after looking all over for this color. Mated with the UV slider and Hamanskea epsilon I love it
Stoked to hear you're loving the LIFT. 🤝
are the accessories still 300 dollars a piece?
Yes. At least
The stabilizer is $249 for the 8 inch. Quiver is also below $300.
@@Elkhunterguy I was being sarcastic saying that they are really expensive unnecessarily expensive. Wayyy to expensive
@@chandlersmith8310if you’re paying 1400 for a bow, you probably don’t care as much for the cost of accessories.
@@skoolynugenator1802 I’m spending as much on the accessories than the bow. More if I want a back bar.
Just grabbed mine today. Excited for this season.
Good luck this season! We appreciate the support. 🤝
Love this video. Looking forward to seeing the same video but with the 2025 flagship. I love my lift 33, going to put some deer down this year and Jan is a couple months away and we will have some 3d shoots to have fun with. Love the bow and everything you guys are doing. Great bow and awesome accessories.
We appreciate the support, Brandon. Good luck this season.
@@MathewsInc thank you so much. God bless you guys.
That bow looks SWEET!
How about positioning that cams into the more inner area where when it drops I don’t accidentally damage the cams. Or was it already done.
Zebra strings were greatest strings ever made. Perfect stretch and creep after each shot
lol zebra changed its name to match strings lmao
@@owsowmuskwanaistus9213 I’ve owned three Mathews bows from new and gave the stock strings a fair try each time and the cables would stretch after 50 shots and need adjustment. Hopefully the match strings can beat that
Big changes props Mathews! Want to see a limb angle similar to the title on a hunting bow.
Houston, we have LIFT off 🔥
It's truly an amazing bow!
I watched people shooting the LIFT at an archery shop. There was a guy shooting a Phase 4 near them. The Phase 4 sure sounded more quiet than the LIFT did. The LIFT they were shooting was all decked out with a stabilizer, etc. ( I think it was the factory demo setup sent to the dealer, fully equipped). The Phase 4 was equipped similar and it was easily more quiet. Also, the guy shooting the LIFT said the draw cycle was very heavy at the front end of the cycle. Very interesting! I have not shot one, just sharing what I have seen so far.
My dealer said all of the LIFTs so far have come in really heavy in terms of draw weight. With a 70# mod they are drawing close to 75 lbs, etc. Another interesting point.
This is insane. I need this bow.
Sweet bow, but my Vertix isn't getting replaced anytime soon. It just works
gonna have to start saving $ for this bad boy! I love my VXR but man this thing looks sweet!
Same here. I was pretty close to throwing down for the phase4 but I got busy…and now hunting season is on. And now that I’m seeing this I’ve forgotten all about that phase4. I wasn’t sure if they could come up with viable changes for this year but they always come up with something and this time they really went beyond
Ordered the lift 33 yesterday I’m very excited! Got the green ambush fade to black 😎. However they claimed my draw length is 2 inches shorter than I have measured a couple different ways. Will I be able to adjust it to give me that extra length if I want it? I’d hate to lose the extra speed if I don’t have to! I’m 6ft 2in with a wingspan of 75.5 inches but they claim a 29 inch draw. I had myself at 31. They charged me an extra $50 for an OD green twist so I’d hate to wait months and then it not fit me right! Thanks for any advice or knowledge you can give me on this issue!
We're stoked you liked the LIFT. Our mods are specific for one draw length. If you would like to accommodate for a longer draw you can always use a longer d-loop or switch mods. We appreciate the support.
Switched from Mathew’s to Elite, never looked back . Elite tune ability and adjustability is outstanding.
I'm with you but I sure would love to see a head to head comparison between the Lift 33 and the Ethos on one of the big archery channels.
Sub 4 pounds is insane! That’s lower than carbon Hoyt bow territory.
This thing is fire!!! It's early, but the LIFT Is for sure in the running for favorite bow of all time.
I hear distributors say that it's a lot easier to move/sell bows when the draw lengths are adjustable.
Having to stock mods, in a pia, many claim.
💙my 🏹lift 29.5 so far 🎯🦌🔥🤙💣
Stoked to hear you're loving the LIFT, Richard.
Getting one today
would sure like to find this in left handed model some time before march of 2024
You guys should have put this on your website before now you had the title target bows on there I was encouraged to wait for the new ones to come out and went home looked on the website to see what they looked like and couldn’t get anything but the title bows I got anxious and bought my Phase 4 I’m super satisfied but I would have liked to see something about it on the website Best bows on the market bar none
Just wondering if the 80lb mods will go into the v3x?
Edit... upon watching the full video, I now realise the answer is no.
howd they outdo the phase 4 like this
LETS GO!!!!!!!!!!!!!
Still has the Chinese bearings. Same as my VXR. That FAILED in 3 months. And Mathews blamed it on customers over tightening the axle screws. 25 cent bearings on a $1400 bow. I’ve got a suggestion. Since Mathews likes to use 3 letters like VXR. Next bow… Bowtech. Superior engineering.
My lift made a popping sound at full draw after inspection my top cam bearing is leaking grease after only one month of shooting it well took care of to I’m highly disappointed in that bow took it to the bow shop and the bottom cam popping also I want my money back should have went with the Hoyt rx8
Would love to have one😢 certainly not in the budget
Ive never been soo excited in my life lol bye phase 4 you’ll always be my first love
Might finally upgrade from my z7
Lol, I'm considering it, but I love my z7.
Please do this to the Atlas! I am a 🦍 and can pull 90+ all day at 33”.
All sounds awesome except it doesn't look like you have changed the grip, that's the only thing that keeps me from shooting Mathews is the grip sucks, until that changes I'll be sticking with my Hoyt, and yes, I have looked into aftermarket grips. I do hope that it changes because I really like everything else about it, but if it's not comfortable in the hand then I'm not gonna shoot it well. Very nice job on all the other stuff though, keep it up!
They need to make a decent wood grip
Ordered mine yesterday
And I will not be running their strings
It will have the Rouge R21 strings
Freaking home run boys
i just bought a phase 4 though....
The technology is pretty awesome, but it’s too bad that hunting has gone in a direction that is so cost prohibitive to the hunter. It’s becoming an elitist sport. I still go out in my grandpa‘s wool rich coat with his lever action 3030 once in a while to remember my roots. Hunting was to secure food for your family, not to prove how cool you were.
Amen
A carbon weight bow out of aluminum... 🤯
Imagine a carbon riser
👠🏹👠🏹👠🏹👠🏹👠🏹
Idk man, i feel like its the same promotional video year after year with the same one liners.
the creed is still lighter
Nice bow but for $1429 +tax. No thanks. 😂 I’m not going to drink the cool aid. I cut my teeth with a Mathew’s but have moved on. The VXR is the only one I kept. Bowtech is where it’s at this year. Hell last years Ss34 still beats this one.
Yea because 129 bucks more is such a game changer......
It's time Triax owners....
Hello, dear Matthews official channel, I am a Chinese player from the other side of the ocean. I like your products very much. It is because your brand has archery. I just bought your new Matthews. As a result, the seller gave me the G of the saw module and my saw module is J, so I can't use it. I asked around that there is no J saw module in China. I would like to ask if you can contact me and send me a J saw module. Thank you very much.
Thanks for your support! Please reach out to our customer service department for any questions regarding orders or product inquiries. www.mathewsinc.com/contact/
All good except the specific mods. Requiring new mods every time you want to modify your dl (due you changed your release or want to try a different anchor point) or your let off is so obsolete... I don't buy the "efficiency" argument; speeds are similar across all brands. Also: for when a replacement for the Atlas? That thing is 3 years old and lack the Stay Afield System, the integrated rails for the new stabs and accesories, the new cams ands axles... Everything!
So the just put LIFT instead of phase 4 ? Lol
🥵🥵🥵🥵
Why can’t I have the limbs done in mossyoak bottomlands, why would you do that. I can have the riser In that color but not the limbs…..
Both limbs and riser are available in Bottomland 👍
@@MathewsInc sorry about that, the website just wasn’t working for me. Thanks for the new camo, and you guys really nailed it this year.
Bummer! Mathews needs to go back to single limb solo cams, what they do best. These new dual cam split 8 limb bows are trash especially with the bad grip. Smaller brace height is garbage. Picked up an old used Mathews Z7 for this year and shoots like a dream and is dangerously smooth. Wish Mathews wasn’t going in the wrong direction with their bow builds!
Still shooting the heli-m and I have the money to buy a new bow every year.
Anything post No-cam is far superior than their solid limb single cam bows of years past. Since 2016 the gap between them and the competition has grown tremendously. It’s too obvious how most all companies copy Mathews now.
Tell them to look at their sales receipts, and say they're going the wrong way. 😂
Reviews sound all the same with every new bow release, lighter, faster, quieter, etc. We'll see when I test one.