ฝัง
- เผยแพร่เมื่อ 6 ก.พ. 2021
- In this video I will show you how to install kitchen sink drain line pipes which includes the ABS Trap & 2 Part Waste.
If you're having a hard time with this I recommend Amazon Home Services to find a competent local plumber: amzn.to/2qb4xBP - แนวปฏิบัติและการใช้ชีวิต
![รวมเพลงลูกทุ่ง 6 หนุ่มไทบ้าน ฮิตติดกระแส ชุดที่ 1 l มนต์แคน ไมค์ ไผ่ เสถียร ไหมไทย พี [Longplay]](http://i.ytimg.com/vi/GD2v1OjMw5I/mqdefault.jpg)
Great video.. just bought a house and in the middle of re-doing ...well, almost everything lol ...Thanks for posting
EXCELLENT presentation!! No nonsense. Just clear, precise instructions. Absolutely the best I've seen.
Absolutely the BEST tutorial for doing this on TH-cam! Thanks!
This was an excellent tutorial. You did a great job of explaining everything.
Very easy to follow through. Great explanation for drain pitch and cut to size pipes.
Your video gave me the confidence to do this job at my brother's house tomorrow. I'm fairly handy but I admit I never did a complete under a sink pipe replacement like this before. I'll let you know how it goes and I'll be sure to check for leaks.
How did it go.
Amazing! Makes me want to listen to my Dad and become a plumber. Nice work!
Thank you. Just replaced my strainer and it’s working great!
Thank you so much, because of this video, a lot of plumbers are going to lose business.
Yes because they are so expensive when you can do it yourself.
Very good presentation of how to assemble a two part kitchen waste line
Nicely explained, you couldn't be any clearer. Thanks!
Just started watching your videos but wow awesome thank you
Awesome everyman video... you're an inspiration Dan... Great work...
The job went well. I ended up needing one more rubber seal ring but I was able to use an old one for the dirty drain connection.
Nice job. I was a little surprised that you intentionally sloped the horizontal pipe by just cocking it within the slip-joint. I've always assumed I wanted my slip-joints to be at good straight-in angles to avoid leaks, and I accomplish slopes with the rotation of pipes within the plumbing layout.
That's a wonderful video. Any suggestions what to do for the replacement of a two bowl sink to one bowl sink. Thanks
Outstanding video on the to do this job properly. Thanks
Thanks 🙏
Great video, straight forward and good advise👍🏼
Thanks 😊
A small thing I've started doing on my white pipes: With a perm marker, I put matching lines on each nut and it's pipe it screwed on to, to show at a glance if it has backed off at all. I've seen a small leak develop because of loosening, presumably from vibration of the disposal, or bad behavior by the house elves.
Great video! I'm doing this next week. Does it make a difference if the t joint goes to the garbage disposal with the right side sink drain pipe going down to the p trap?
Very details instruction! Thanks!!
Great video. Thank you.
Beautifully illustrated...)
Thank you for the information 🙏
Saved me a boatload of 💵 thank you!
Great info!
Wow! you make it so easy, I have 2 days trying to figure out how to fix my leaky kitchen sink 😟
I see 2 water valves, one set lower and one upper, I assume the upper ones are for the sink (hot and cold), but the lower ones? I'm assuming again that the supply is from the right in the copper tube is cold and the left one looks like hot water going to the DW?
Thanks. Great videos.
Thanks for watching!
Thank you for the video. Clarification, it seems the adapter is ABS, but the rest of the pipe is polypropylene plastic.
Dearborn Brass A9704B P-Trap With Threaded ABS Adapter, 1-1/2 in, Polypropylene
Thanks for the video. I need to angle the drain pipe from the strainer sink to the pipe going into the two drain pipe adapters. Sorry. Not very descriptive. The original tail pipe is hanging too low for a trash can tray. What is best way to angle from the strainer sink to the p trap combiner? I have seen a pipe with a 45° adapter on each end which I think might work. Thanks again for any advise you can give this hobby plumber. 😮
My only question is why did you use ABS instead of PVC?
ABS holds up to higher temperatures better.. at least that's why I choose ABS
Nice job! I’m in the Chicago area and I’ve never seen all these parts in ABS. Where are you, and where did you get the ABS. Why do you use ABS, and what are advantages over pvc, polypropylene, etc., that’s available at Menards?
Thank you for this video
Thank you for the support on the channel!
Thank you for your video. Can you let me know where I could buy drain pipe kit? I would like to replace my old pipes and my drain structure is almost same to you.
Try Walmart. I just bought a kit for $22 with every pipe you may need to replace kitchen sink drain pipes. I also bought a flexible extension piece for $7 to replace the one under my sink. You can probably get the same thing at any home improvement store like Lowes but they were closed when I needed it right away.
good idea to install drain line pipes...seemed to save a lot of space,,,this looks like what I was looking for!! Thank you!! is that 36 inch wide sink? Do think this fit 2 x 4 gallon RO tanks? (each width 13 inch & depth 13 inch, height 17 inch)
Yes it will fit the reverse osmosis tanks. Thanks for the support!
Where can I purchase the black pipe line?
Where'd you get the pipe?
Where did you vent the pipes?
i always use Black or White ABS.easier. faster.easy money.
How soon can you use the sink after installing the basket gasket ????
Immediately
Danny,How $much$ for that Job? if you don't mind me asking in the comment.
$195 plus parts
@@How2Plumb Thanxx 4 the feedback.that's about where i charge as well.good price.
Can’t use ABS for this in many jurisdictions. PVC is ok.
The dishwasher drain pipe has a low point. Wont this cause it to act like a P-Trap?
No because there is a pump on the dishwasher that pumps the water. A P-trap is drained by gravity. Good question thanks for washing.
Curious. Does your dishwasher have it's own drain pipe that goes to the dirty drain? It doesn't connect to a garbage disposal?