Thermochemical Conversion of Biomass to Biofuels via Gasification
ฝัง
- เผยแพร่เมื่อ 23 ก.ย. 2012
- Researchers for the Dept of Energy are working improving the efficiency and reducing the cost of the gasification and fuel synthesis process
- วิทยาศาสตร์และเทคโนโลยี
Thanks for this.as a process operator this was great.
very informative, now i have better understanding of my dissertation.
Very good video!
Thanks for the lesson
Thanks for informative video.I have a question.Which catalysts we use when we remove tars?
Informative video
Question: how many electric power needed to operate gasification plant?
very good and help full will you involve us with your team
Can see component the tools make gasification all?
i need more details about this device !
The entrance of oxygen, even in the form of water, bothers me since we want a maximum of alkanes normally since we want to get rid of fossil ones.
The biomass should be dried outside before entering with perhaps solar and wind.
So I think the biomass should next inside the reactor be heated not via combustion but through microwaves, lasers etc.. Perhaps a pulsed approach of instant laser vaporization of small quantities is an option.
We don't like sulfur so the biomass entering should be chosen well to be sulfur poor, say bamboo or so. (elephants grass?)
We don't like expensive catalysts. So I wonder if pressure and perhaps ammonia addition would work also to get lighter fuel. The ammonia serves as hydrogen carrier. It should be reformed later ideally. Perhaps today even adding pure hydrogen is an option since syngas contains hydrogen. The flammability problem seems under control.
This process is now often done at high temperature which means heat loss but with flash laser evaporation the high temperature would be reached while the energy loss would be minimized.
Where or how can I learn to make a machine like that!?
Will the producer gas(or syn gas) not get burnt if operating temperature is high like 800 degree Celsius or above?
In a sense, some carbon monoxide will get burned off. Because you see, the water gas-shift reaction (the reaction responsible for gasification) is a reversible reaction involving carbon dioxide, carbon monoxide, water and hydrogen. At this temperature (or more specifically at this state), these 4 compounds form a reaction equilibrium, resulting to appropriate amounts of these compounds.
What is the filter material that helps create more syngas?
You mean the catalyst or filter filter?
what is the entering temperature of steam ?
Which are those catalysts?
Javox C For methane, it reacts with water at high temperature to form CO and H2. Then CO and H2 reactss again to form CH3OH eventually.
at what temperature do the gases break away from the biomass? some sources say at 450-500C the gasification is 90% done, others say we need higher temperatures, around 800-900C. Which one is correct?
450-500
We own peat, in vast amounts
Can you guide us in to getting a production plant that can utilize the peat fuel and turn it in to liquid fuel?
in order to do so, you would need to invest in a specialized compressor to put the gases generated under pressure in storage tanks.. eg propane tanks
May I ask which software did you use to make the animation?
Probably MS Paint.
Esse gás pode ser armazenado em tanques?
What percentage of that gas would be hydrogen and methane? What ate the other gases? Does it produce less Co2 when burned?
We. (JK ENERGY) have invented "Fast Pyrolysis (continuous) System" for scientifically conversion of any *DRY AGRO* waste to active energy without the pollution of environment.
We developed a pilot project for Govt.of Maharashtra , MAHARASHTRA BAMBOO DEVELOPMENT BOARD,Nagpur
( Special purpose of Bamboo waste disposal project) .
On the completion of the process of any Dry Biomass Waste.
we get three Bio Products
1) Pyrolysis Oil - 45/50%
2) Activated Charcoal - 25/30%
3) Syn Gas.- 20/25%
◆ (with the help of LIT-Laxminarayan Institute of Technology, Nagpur, Maharashtra,India) On distillation of pyrolysis oil we get
* Light Diesel Oil (LDO-30/35%)
* Compressed Natural Gas(CNG-15/20%)
* Pesticides (45/50%)
◆ The Activated Charcoal obtained from the system is used in various industries such as Cosmetic industry, Pharmaceutical industry and Fertilizer industry.The Activated Charcoal can also be used for Purification of Water.
◆ Syn gas can be used for generation of Electricity and on compression of syn gas we get Compressed Natural Gas(CNG).
This is a patented project and the size of the system varies from 1 tonne per day to 40 tonne per day
I'm planning to setup a plant from husk conversion to biofuel. Can anyone suggest me regarding setup and it's ratio of out put for 1Tonne of husk how much biofuel can we obtain ...
Most fischer Tropsch plants can convert 75% of the feedstock mass to liquid fuel, so 1 metric tonne would produce 750 kilograms of liquid hydrocarbons.
How do you remove the water from the process?
Deon Silmark H2O + C = CO + H2
I'm concerned with how carbon dioxide is scrubbed and how sulfur (which tends to contaminate the Fischer-Tropsch catalysts) is removed. I think it is done in a hot desulfurization process involving zinc.
pls can anyone help with the full video of detailed misanthus plant conversation into biofuel and electricity. .
We. (JK ENERGY) have invented "Fast Pyrolysis (continuous) System" for scientifically conversion of any *DRY AGRO* waste to active energy without the pollution of environment.
We developed a pilot project for Govt.of Maharashtra , MAHARASHTRA BAMBOO DEVELOPMENT BOARD,Nagpur
( Special purpose of Bamboo waste disposal project) .
On the completion of the process of any Dry Biomass Waste.
we get three Bio Products
1) Pyrolysis Oil - 45/50%
2) Activated Charcoal - 25/30%
3) Syn Gas.- 20/25%
◆ (with the help of LIT-Laxminarayan Institute of Technology, Nagpur, Maharashtra,India) On distillation of pyrolysis oil we get
* Light Diesel Oil (LDO-30/35%)
* Compressed Natural Gas(CNG-15/20%)
* Pesticides (45/50%)
◆ The Activated Charcoal obtained from the system is used in various industries such as Cosmetic industry, Pharmaceutical industry and Fertilizer industry.The Activated Charcoal can also be used for Purification of Water.
◆ Syn gas can be used for generation of Electricity and on compression of syn gas we get Compressed Natural Gas(CNG).
This is a patented project and the size of the system varies from 1 tonne per day to 40 tonne per day
Info whatsapp 9850997262
Can the char be used to make Briquettes?
Yes 100%
why haven't you replied to any of the comment?
Can this syngas be used in fuel cell technologies? How?
I am a layman but fuel cells seem to depend on catalysts and these are known to require very pure inputs or they get contaminated. Syngas is a mixture. Sulfur is present and seems notorious in its ability to poison catalysts.
will u help to design & construction and working biogas conversion to biofuel machinery plz relpa me sir
We. (JK ENERGY) have invented "Fast Pyrolysis (continuous) System" for scientifically conversion of any *DRY AGRO* waste to active energy without the pollution of environment.
We developed a pilot project for Govt.of Maharashtra , MAHARASHTRA BAMBOO DEVELOPMENT BOARD,Nagpur
( Special purpose of Bamboo waste disposal project) .
On the completion of the process of any Dry Biomass Waste.
we get three Bio Products
1) Pyrolysis Oil - 45/50%
2) Activated Charcoal - 25/30%
3) Syn Gas.- 20/25%
◆ (with the help of LIT-Laxminarayan Institute of Technology, Nagpur, Maharashtra,India) On distillation of pyrolysis oil we get
* Light Diesel Oil (LDO-30/35%)
* Compressed Natural Gas(CNG-15/20%)
* Pesticides (45/50%)
◆ The Activated Charcoal obtained from the system is used in various industries such as Cosmetic industry, Pharmaceutical industry and Fertilizer industry.The Activated Charcoal can also be used for Purification of Water.
◆ Syn gas can be used for generation of Electricity and on compression of syn gas we get Compressed Natural Gas(CNG).
This is a patented project and the size of the system varies from 1 tonne per day to 40 tonne per day
Info whatsapp 9850997262
Why do they remove methane? Methane (CH4 natural gas) is perfect for combustion! or for methanol production
And also a huge Greenhouse Gas
ok but if there is a valuable byproduct, let's use it, not destroy it.
+SevenEightyThree Hertz -Methane is removed or better to say Harvested. That is one of the Gasses we are working toward.
But it is harmful thatswhy we are not using conventional types of particulates
please can explane how we can convert this syngas on liquid fuel like gasoline at home ?
We. (JK ENERGY) have invented "Fast Pyrolysis (continuous) System" for scientifically conversion of any *DRY AGRO* waste to active energy without the pollution of environment.
We developed a pilot project for Govt.of Maharashtra , MAHARASHTRA BAMBOO DEVELOPMENT BOARD,Nagpur
( Special purpose of Bamboo waste disposal project) .
On the completion of the process of any Dry Biomass Waste.
we get three Bio Products
1) Pyrolysis Oil - 45/50%
2) Activated Charcoal - 25/30%
3) Syn Gas.- 20/25%
◆ (with the help of LIT-Laxminarayan Institute of Technology, Nagpur, Maharashtra,India) On distillation of pyrolysis oil we get
* Light Diesel Oil (LDO-30/35%)
* Compressed Natural Gas(CNG-15/20%)
* Pesticides (45/50%)
◆ The Activated Charcoal obtained from the system is used in various industries such as Cosmetic industry, Pharmaceutical industry and Fertilizer industry.The Activated Charcoal can also be used for Purification of Water.
◆ Syn gas can be used for generation of Electricity and on compression of syn gas we get Compressed Natural Gas(CNG).
This is a patented project and the size of the system varies from 1 tonne per day to 40 tonne per day
For more information, whatsapp 9850997262
done subcribe
we produce biomass gas genset 150-1000kw
if only this came truw and we were all driving on wood gas
i wonder why we aren´t driving like humblebees, also the Colibri is levitating but they need no gas..
Be grate to reuse the waste heat to produce power
making enough the biosyncrude
Use hemp for bio mass
this is a flux capacitor...i know how they powered time travel..
Energy concepts that doesn’t have ‘negative refractive index’ materials within its system hypothesis is generally not practical.
fucking do this already god damn it.
alguien que me dé un poco de información sobre este proceso sobre todo si ya existe algún equipo en la actualidad en México
en México yo no sé, pero en Brasil tenemos fabricación de equipos gasificadores e pirolisadores, la empresa se llama Bioware (www.bioware.com.br) su director técnico llama Juan, ellos ya exportaram equipo para Mexico. abrazo!
Use wisely, it's not like fuel grows on trees...........oh wait
It is difficult to understand why someone would do this. Converting wood to CO2 , it is really against the idea of redusing the CO2 in the air. Cutting big trees that absorb the CO2 and plant smal one that absorbs much less.
Co2 is part of the circle of life. Its no poison its a plant fertilizer and there is a big industrie to brainwah people to shell their crap!
Good job
@@jayojoe Right on man. It's a matter of balance. Cut a tree down, plant others to compensate. It's as simple as that
the correct term is pyrolysis.
Conversion itself is a process already, so you don't add the word "process". Keep it simple. It doesn't make you sound smart.