6:10 GIGGIDY! But that's not how to go through a sidewall. Consider addressing that penetration using a Slimduct Line Set Cover or similar. Alternatively, if you're considering this system I'd suggest going through the floor first and avoiding the sidewall if possible.
Hey buddy the segment error your getting is fail safe that bitmain has on there control boards. For some reason some ASICS you’ll run into that issue and some not. The only way I’ve found around this issue is to change the control board out. Xp models I’ve seen it to be more common. Not sure why
I've just ordered one C2 Kit. Do you know if the dry cooler can mount with fan backwards to a wall or up ? It's stupid to have connections always on same side.
I'm really excited about the setup May you please share the pump detail you're going to use I wana make a hydro cooling setup for s19 hyd and im doing it myself, unfortunatelly i dont know what type of pump shoud i use to reduce the noice I think your pump was brushless DC, what should i search for? Thanks
Depending on electrical panel access rules and regulations you might not be able to leave you cooler where it’s placed as it maybe a hazard incase of an emergency, check with your electrician
Hi hobbyist miner I have question how did you get your electric down so low mine is at 14. At the house at lowest is at my company and it's at 12. Any tip and trick would be appreciated and love your video I can buy the hardware the but electricity is the problem.
So I just watched this entire bloody video because it said he will tell us why Liquid Cooling is Awesome. He does not do that, he runs through his installation and talks a lot of BS about his cousins machines and such telling us how he has more room and how the system is installed in his shed. This video is nothing more than a video of a guy showing off his stuff. There is no content here that tells you the good or bad of liquid cooling in anyway. This entire video is not as it is labeled. CLICK BAIT BS. It's nothing more than a flex, that's it.
That box looks amazing!
Not watching the video, just here to comment on how over the top ridiculous this thumbnail is. In the best way.
Hell Yeah it Is!
Agree Mike
6:10 GIGGIDY! But that's not how to go through a sidewall. Consider addressing that penetration using a Slimduct Line Set Cover or similar.
Alternatively, if you're considering this system I'd suggest going through the floor first and avoiding the sidewall if possible.
Always that one guy! PRO-FESSIONAL!
@@TheHobbyistMiner Hey at least I provide a solution when pointing out an issue. It's only because I care :- )
100% appreciated. Learning as I go!
Do you know if its possible to do immersion for the Ka3 kadena miners?
Hey buddy the segment error your getting is fail safe that bitmain has on there control boards. For some reason some ASICS you’ll run into that issue and some not. The only way I’ve found around this issue is to change the control board out. Xp models I’ve seen it to be more common. Not sure why
Wow that is super helpful, thank you!
Super excited
Me too~
We used submer containers with 144 miners per container in North Dakota for our initial POC.
Dang that sounds sick!
@@TheHobbyistMiner if you want i can share you the diagrams.
What fan spoofers are you using and do you like them
It comes with Fan Spoofers. However the ones I have used on other projects geni.us/DummyPlugsASIC
@@TheHobbyistMiner thanks I was wondering if you where using the red devils 👍🏼
Where did you get your handles?
@@reidshumate3708 came with the fog hashing kit
I've just ordered one C2 Kit. Do you know if the dry cooler can mount with fan backwards to a wall or up ? It's stupid to have connections always on same side.
@thorsten3283 the Fans blow air outward. Pulling air through the radiator
@@TheHobbyistMiner so fans on wall-side should be more problematic than fans up. Maybe I should ask if I can get longer tubes.
Immersion let's go
Let's Go!
I'm really excited about the setup
May you please share the pump detail you're going to use
I wana make a hydro cooling setup for s19 hyd and im doing it myself, unfortunatelly i dont know what type of pump shoud i use to reduce the noice
I think your pump was brushless DC, what should i search for?
Thanks
I couldn't tell you. The Fog Hashing Kit is an all in one system. Everything comes ready to go out of the box
Depending on electrical panel access rules and regulations you might not be able to leave you cooler where it’s placed as it maybe a hazard incase of an emergency, check with your electrician
Hi hobbyist miner I have question how did you get your electric down so low mine is at 14. At the house at lowest is at my company and it's at 12. Any tip and trick would be appreciated and love your video I can buy the hardware the but electricity is the problem.
This Video Explains more th-cam.com/video/VKHORfUyBWE/w-d-xo.html
Bro change your name you are way beyond hobbyist I’m going to sue for false advertising 😂
Haha! Never!
😎
It's very hard to find pc gamers using this solution why is this?
So I just watched this entire bloody video because it said he will tell us why Liquid Cooling is Awesome. He does not do that, he runs through his installation and talks a lot of BS about his cousins machines and such telling us how he has more room and how the system is installed in his shed. This video is nothing more than a video of a guy showing off his stuff. There is no content here that tells you the good or bad of liquid cooling in anyway. This entire video is not as it is labeled. CLICK BAIT BS. It's nothing more than a flex, that's it.
😎
Thanks for the help HIVE!