Ive got the ultralight kestrel baitcaster and its become my favorite rod! First catch of the year was a 26" freshwater drum on my kayak, it was an incredible fight!
I was a Penn only guy for the longest, but caught a sale on a kastking rod and reel and thought it'd make a good gift for the wife. Well, i was impressed and now have 3 kastking setups!
Ethan, swapping the carbon washer for a felt washer and adding some cals grease will fundamentally change the drag on the reel for the better. It totally changes the drag system. The felt washer and grease will eliminate the "jerkiness" of the drag upon the first hook set and then engage the drag in an extremely smooth linear manner. Give it a try! You'll love the drag after the change.
I came to the comments to recommend the same modification. Another TH-camr, “i_fish”, had done the same to his reel and stated it had great results to address the drag issues.
@@PennNative I haven’t done it personally, as I haven’t purchased one of these reels at the moment. i_fish took some felt washers out of an old reel to use in his Kestrel reel. He said anything of similar size should work. I’d imagine any site that sells reel parts would have compatible felt washer on hand. Perhaps a tackle shop too.
@PennNative I had some left over from my abu garcia days. I have a box full of reel parts and washers but you can measure the carbon washer and cut your own from a piece of felt. It's super easy to make your own.
Thanks Tony! I have the same rod & reel and I love it. It's my most used spinning setup. Mostly because I LOVE the size and feel of the rod. The Kestrel baitcasting rod & reel is my overall absolute all time favorite though. If you like lightweight gear I recommend either one of them wholeheartedly. My only problem is with the Kastking braided line. My experience has been that it's sometimes great and sometimes truly horrible. I've had three experiences now where I had to cut off the whole spool because it turned into such a snarled mess. Not fun!
That is good intel! So maybe their braid has a bit of a quality control challenge? Either way, I will continue to test the 13x spool I have. It feels good, but there are lines I definitely think are better. Pros and cons!
I just started fishing through wanting to for basically my whole life about a month or so and geared towards ultralight fishing because of you and enjoyed your video format and information output. Im also wanting to buy the mule lures as well because of their effectiveness through your videos. I hope to get better at ultra light fishing and fushing in general because bass fishing is fun as well hut it takes more time and less action until you catch the biggin of course lol.
I know I always say it but I just love your content. You always learn something watching your videos. It is just amazing content and amazing baits. God bless brother and tight lines!!
I love KastKing! I have several of their reels both spinning and casting and they outperform some of my more expensive reels. I have 1 KastKing rod and that is a 7'4" MH Spirale Moderate Fast action and I absolutely love it! When I need to get another new rod, I will be going with KastKing. On another note, awesome review vid! Keep em coming!
I've been exclusively using kastking superpower braid for the last 5 years. Everything from 6lb up to 50lb. Its affordable and performs as well as any name-brand braid that I've ever used. I can't recommend it enough. And I can confirm the castability of the 6lb on an ultralight setup is top notch! 👌
I use a Falcon 5' UL rod with a Lew's microlite reel. A real similar outfit . I use 4 lb flurocarbon and cast all of your baits with ease. Great fun. Thanks for sharing Ethan.
I have the kestrel reel on my tfo panfish rod. Works well for me. Good balance. With lite 3-4 pound line the drag works well when I hook those big 18 inch plus northernq pike minnow, bass, or shad. Thanks for the info Ethan. Keep up the good work.
I've got the 4'6" KastKing Zephyr that I just took on my first little creek wading adventure and caught dozens of little pan fish and loved the shorter rod for that. I was looking at the Kestrel and am definitely heavily considering it if I can start wading and exploring some of the urban creeks more!
Kastking makes some great quality stuff. I showed a fishing friend of mine a 3000-size Kapstan Elite saltwater reel that was IPX6 waterproof rated, for only $130! He turned his nose up at it because it wasn't a Van Staal, Visser, or Penn. I showed him, and caught a 20-lbs Altantic Cod on it from a party boat and was able to reel it up with ease.
@@FishAnything KastkIng used to be 30 minutes from my house when they were in Garden City under the name 'ePoseidon'. Unfortunately, I never dropped in to check them out and closed their brick & mortar store about 10 years ago.
New subscriber here! I am trying to get back into fishing after a 30 year layoff. So much has changed, and a lot still stayed the same. I am so greatful to have found your channel... Especially because you're a fellow Michigander! Thanks Nathan, and I plan on adding some of your gear in the near future! I always love to support local.
@@FishAnything I just got my first order from you in the mail! It only took a day to get here because I'm in Michigan as well (Right near the top of Lake St. Clair). I'm really excited to try it out!
If you're able to in the future, you should definitely check out the Zephyr line of rods and reels. I've had the spinning reel for a bit and it's been way too much fun to use, and same goes for the casting rod. Love your vids!
Victor from ifishtackle reviewed this reel, and he says that’s same about the drag sticking on the reel, not as smooth. He swapped the carbon fiber disc with a felt disc and some grease and now is smooth as butter! If you’re keeping the reel I highly suggest that. Tight lines my friend!
I have the featherlight baitcast version of this rod. Wish it was about 6" longer, but It is an absolute blast as a trout or crappie rod and it's landed a couple of sizeable cats with no ill effects.
I agree, kast king drag system is very hard to set. I have never been a fan either. The rod seems good though. The double rig is something I never use. Would love to see a tutorial video in the future on that. Great video Ethan!
I have read the fix for the Kast Kings uneven stiff drag is to change out the carbon fiber drag washer for a felt washer out f a different reel and the drag then becomes very smooth and good.
Personally I don't think you should have to modify a reel straight out of the box. Especially for $120 Either way, I will definitely do a double jig rig video in the future - thanks for the suggestion :)
@@FishAnything I agree and it is the reason that for ultralight fishing reels in around that price range why there is either Diawa or Shimano and then all the rest.
I have 2 of the Kestrel 1000 and one bfs. Just recently caught a 15 lb carp on my bfs and last year on my 1000 I caught a 27 inch rainbow trout. One thing about these reels I’ve noticed is that they seem to work better with fluorocarbon.
U make it look so easy to catch fish. I sometimes cast for hours and get no bites. Yesterday i tried drop shot rig. And finally i experienced the thumpp u been saying. I straight hooked and i was a big talapia . 😂
The reel uses a carbon drag, same as a Shimano Soare XR. You will feel an initial drag, but with same fish fighting you wont have any drag when you reel in the fish unless it gives a really hard run or pull.
great video!! kinda new-ish to the fishing scene. but from what ive seen and heard from other anglers is that when using braided line they usually have a leader with either flouro or mono. do you find to be a necessity? thanks!!
I always tie on about 6 feet of leader, usually copolymer when using an ultralight. If I’m bass fishing with larger line diameters I go straight fluorocarbon. Double uni knot!
Great video and great information on the kastking setup I have 3 of the kastking spinning reels and 1 regular baitcaster and 1 zephyr bfs reel and a round Rover reel for catfishing and thinking about getting some of the kastking rods are you going make any micro lizards
Have you used the casting rods? I just got the 5"9' FL rod, and paired it with the Kestrel Elite BFS reel. I like it, but I think the tip is a little too soft for hook sets on smallies. I just bought the 6"3 UL. Hoping it has a slightly faster tip.
Would the 6’2” 1/32-1/4 oz (spinning) be a good rod for 1/8 oz lures? 1/8 oz is my go to size/weight and the spinning rod I presently have (ML) struggles a bit loading with 1/8 oz …
I also have some experience with a KastKing product which is the Perigee ll medium light/fast 6' 7" spinning rod. I consider it to be a well-made and reliable product. However, instead of a KastKing reel, I chose to use a reel from Cadence the Elate 2000 which I spooled with 6-lb. monofilament. You are familiar with KastKing but what experience do you have with Cadence products?
Lol you absolutely don’t need to! I don’t do these videos to encourage owning tons of ultralights. I just do them to compare and contrast so I can help folks get the right rod from the start
The kastking braid isn't bad for the price, but boy do I get a lot of wind knots with the 6lb! Might try the 8lb to see if its any better or switch to an ester line
Hmmm that’s a good question. I prefer Daiwa as a brand, but this rod is solid for the price. I think if you want a travel rod, go for the Daiwa. If you don’t need a travel option, get the Kestrel.
That's the weird part about many Daiwa and Shimano lighter reels. Here almost all 1000 I see are like "D" for deep spool. So they make it tiny just to put 150m of 0.20mm on it? Can't cast that far with those lures, not that kind of fish to run so far, even more limited casting range if you use line as fat... So add 100m(+weight!) underlaying one by default? It's so weird. As for the rod, at 5' something total it's very close to my longest multipiece rods taken apart. So I would probably go for a single piece short ultralight. Just not for the 90$. Doesn't tick some of my boxes. Decent rods are very cheap these days. Almost cheaper than Rapala lures 🤣
Personal preference is a crucial part of gear selection. I find that I can happily use any length ultralight. The 6-7' range is probably the most comfortable though.
I am not yet sold on paying more for the Kastking gear than I would have to pay for say a Diawa Presso rod and Legalis JDM reel. I know the quality of the Diawa stuff at even less cost but no experience with the Kastking even though it is at a more premium price point.
Yeah you need to stick with what you’re comfortable with. For me, I’d 100% rather go for a Daiwa or shimano reel, however this rod is pretty solid for $90 so it’s still a good option.
11:33 The drag probably sucks because it’s carbon fiber, because all these reel companies think cArBoN FiBeR wAsHeRs aRe bEtTeR, when in fact carbon fiber is not better than felt FOR ULTRA LIGHT FISHING, YOU BOZOS. It’s all marketing. You want smooth, delicate, felt washers for ultra light. Think you’re gonna hook a 1000 pound tuna at the park pond? These are the same guys that think 10 lb line and a medium action rod is finesse fishing. You don’t need carbon washers. The felt washers will eventually need to be replaced but these garbage 90% plastic reels won’t last long enough for it to ever be an issue.
@ifish had a good vid on drag settings. I think he either greased his carbon discs or put in some felt on his kestrel. I really don’t use drag on my setups as much, but might try in the future.
I appreciate the perspective. I am not much of a fan of having to modify gear right out of the box. I will play around with the felt drag washer concept, but to your point, if a reel is made for ultralight fishing, why use parts that aren't ideal?
Ive got the ultralight kestrel baitcaster and its become my favorite rod! First catch of the year was a 26" freshwater drum on my kayak, it was an incredible fight!
I bet that was an absolute blast! Thanks for sharing :)
I was a Penn only guy for the longest, but caught a sale on a kastking rod and reel and thought it'd make a good gift for the wife. Well, i was impressed and now have 3 kastking setups!
Awesome! 🤠
Ethan, swapping the carbon washer for a felt washer and adding some cals grease will fundamentally change the drag on the reel for the better. It totally changes the drag system. The felt washer and grease will eliminate the "jerkiness" of the drag upon the first hook set and then engage the drag in an extremely smooth linear manner. Give it a try! You'll love the drag after the change.
I came to the comments to recommend the same modification. Another TH-camr, “i_fish”, had done the same to his reel and stated it had great results to address the drag issues.
@@nealstacy4393
👍👍 It totally changes the reel for the better.
Where do you guys order these from?
@@PennNative I haven’t done it personally, as I haven’t purchased one of these reels at the moment. i_fish took some felt washers out of an old reel to use in his Kestrel reel. He said anything of similar size should work. I’d imagine any site that sells reel parts would have compatible felt washer on hand. Perhaps a tackle shop too.
@PennNative
I had some left over from my abu garcia days. I have a box full of reel parts and washers but you can measure the carbon washer and cut your own from a piece of felt. It's super easy to make your own.
Thanks Tony! I have the same rod & reel and I love it. It's my most used spinning setup. Mostly because I LOVE the size and feel of the rod. The Kestrel baitcasting rod & reel is my overall absolute all time favorite though. If you like lightweight gear I recommend either one of them wholeheartedly. My only problem is with the Kastking braided line. My experience has been that it's sometimes great and sometimes truly horrible. I've had three experiences now where I had to cut off the whole spool because it turned into such a snarled mess. Not fun!
That is good intel! So maybe their braid has a bit of a quality control challenge? Either way, I will continue to test the 13x spool I have. It feels good, but there are lines I definitely think are better. Pros and cons!
i've been on the fence about kastking for a few months now. thanks for the review.
For $90 the rod is a pretty great option. I would probably go for a Daiwa or Shimano over that reel though. Just my perspective as it stands today :)
I just started fishing through wanting to for basically my whole life about a month or so and geared towards ultralight fishing because of you and enjoyed your video format and information output. Im also wanting to buy the mule lures as well because of their effectiveness through your videos. I hope to get better at ultra light fishing and fushing in general because bass fishing is fun as well hut it takes more time and less action until you catch the biggin of course lol.
Love to hear it! Ultralight fishing will definitely help you catch a lot of fish! Truly appreciate the support.
@@FishAnything caught an 11 inch bluegill with my ultra light set up. That guy fought my rod like a bass
I know I always say it but I just love your content. You always learn something watching your videos. It is just amazing content and amazing baits. God bless brother and tight lines!!
Truly appreciate you brother
I love KastKing! I have several of their reels both spinning and casting and they outperform some of my more expensive reels. I have 1 KastKing rod and that is a 7'4" MH Spirale Moderate Fast action and I absolutely love it! When I need to get another new rod, I will be going with KastKing. On another note, awesome review vid! Keep em coming!
Love to hear it! Thanks for watching
I've been exclusively using kastking superpower braid for the last 5 years. Everything from 6lb up to 50lb. Its affordable and performs as well as any name-brand braid that I've ever used. I can't recommend it enough.
And I can confirm the castability of the 6lb on an ultralight setup is top notch! 👌
This was the 13x and it works great! Solid line for the price
I use a Falcon 5' UL rod with a Lew's microlite reel. A real similar outfit . I use 4 lb flurocarbon and cast all of your baits with ease. Great fun. Thanks for sharing Ethan.
Thanks Jerry. Been meaning to try one of those Falcon rods for a while now.
I have the kestrel reel on my tfo panfish rod. Works well for me. Good balance. With lite 3-4 pound line the drag works well when I hook those big 18 inch plus northernq pike minnow, bass, or shad. Thanks for the info Ethan. Keep up the good work.
Thanks for sharing! Sounds like a fun setup :)
I've got the 4'6" KastKing Zephyr that I just took on my first little creek wading adventure and caught dozens of little pan fish and loved the shorter rod for that. I was looking at the Kestrel and am definitely heavily considering it if I can start wading and exploring some of the urban creeks more!
Man that sounds like a blast!
Where did you buy the rod from? I could only find the 5'..
Kastking makes some great quality stuff. I showed a fishing friend of mine a 3000-size Kapstan Elite saltwater reel that was IPX6 waterproof rated, for only $130! He turned his nose up at it because it wasn't a Van Staal, Visser, or Penn. I showed him, and caught a 20-lbs Altantic Cod on it from a party boat and was able to reel it up with ease.
I am always willing to try things. I must say that Kastking has upped their game and the products feel solid!
@@FishAnything KastkIng used to be 30 minutes from my house when they were in Garden City under the name 'ePoseidon'. Unfortunately, I never dropped in to check them out and closed their brick & mortar store about 10 years ago.
New subscriber here! I am trying to get back into fishing after a 30 year layoff. So much has changed, and a lot still stayed the same. I am so greatful to have found your channel... Especially because you're a fellow Michigander! Thanks Nathan, and I plan on adding some of your gear in the near future! I always love to support local.
Truly appreciate the kind words and support! Holler if I can ever help with anything specific :)
@@FishAnything I just got my first order from you in the mail! It only took a day to get here because I'm in Michigan as well (Right near the top of Lake St. Clair). I'm really excited to try it out!
I've been waiting for this vid!
Took me too long!
Last king is awesome. I really enjoy fishing with mine. Nice video and nice review.
Thanks! Tight lines 🤠
If you're able to in the future, you should definitely check out the Zephyr line of rods and reels. I've had the spinning reel for a bit and it's been way too much fun to use, and same goes for the casting rod. Love your vids!
I’ll have to look into them! Thanks man
Victor from ifishtackle reviewed this reel, and he says that’s same about the drag sticking on the reel, not as smooth. He swapped the carbon fiber disc with a felt disc and some grease and now is smooth as butter! If you’re keeping the reel I highly suggest that. Tight lines my friend!
I’ll look into it! It’s a bit annoying that a $120 reel needs to be modified right out of the box 😭
As do I, I will think about purchasing one maybe once they change the color way, if they do.
I have the featherlight baitcast version of this rod. Wish it was about 6" longer, but It is an absolute blast as a trout or crappie rod and it's landed a couple of sizeable cats with no ill effects.
Love to hear it!!
I have the 3pc Kestrel light rod with the Kestrel Elite reel and it's so much fun catching slab crappie!
Yeah I dig this setup! Slab Crappie sounds like a blast right about now :)
I agree, kast king drag system is very hard to set. I have never been a fan either. The rod seems good though. The double rig is something I never use. Would love to see a tutorial video in the future on that. Great video Ethan!
I have read the fix for the Kast Kings uneven stiff drag is to change out the carbon fiber drag washer for a felt washer out f a different reel and the drag then becomes very smooth and good.
Personally I don't think you should have to modify a reel straight out of the box. Especially for $120
Either way, I will definitely do a double jig rig video in the future - thanks for the suggestion :)
@@FishAnything I agree and it is the reason that for ultralight fishing reels in around that price range why there is either Diawa or Shimano and then all the rest.
I have 2 of the Kestrel 1000 and one bfs. Just recently caught a 15 lb carp on my bfs and last year on my 1000 I caught a 27 inch rainbow trout. One thing about these reels I’ve noticed is that they seem to work better with fluorocarbon.
Wow sounds like you’re putting them to good work!! Thanks for sharing.
@ oh ya. Just this last weekend I used one of mine on the Missouri River for walleye, smallmouth, and white bass
Great review i love kastking braid
It seems like a decent option! Thanks for watching :)
U make it look so easy to catch fish. I sometimes cast for hours and get no bites. Yesterday i tried drop shot rig. And finally i experienced the thumpp u been saying. I straight hooked and i was a big talapia . 😂
Hang in there - I fish in different waters so the likelihood is that we have totally different fishing available to us. Tilapia would be fun to catch!
The reel uses a carbon drag, same as a Shimano Soare XR. You will feel an initial drag, but with same fish fighting you wont have any drag when you reel in the fish unless it gives a really hard run or pull.
Good to know! Not sure I need this much drag power for ultralight techniques 🤔
I might have to pick up the rod. I dont have a 5'2 rod yet. I fish SUPER tight creeks
great video!! kinda new-ish to the fishing scene. but from what ive seen and heard from other anglers is that when using braided line they usually have a leader with either flouro or mono. do you find to be a necessity? thanks!!
I always tie on about 6 feet of leader, usually copolymer when using an ultralight. If I’m bass fishing with larger line diameters I go straight fluorocarbon. Double uni knot!
Great video and great information on the kastking setup I have 3 of the kastking spinning reels and 1 regular baitcaster and 1 zephyr bfs reel and a round Rover reel for catfishing and thinking about getting some of the kastking rods are you going make any micro lizards
I was pleasantly surprised with this setup! As far as micro lizards go, not sure at this time!
Have you used the casting rods? I just got the 5"9' FL rod, and paired it with the Kestrel Elite BFS reel. I like it, but I think the tip is a little too soft for hook sets on smallies. I just bought the 6"3 UL. Hoping it has a slightly faster tip.
I haven’t used their casting rods yet - thanks for sharing!
Would the 6’2” 1/32-1/4 oz (spinning) be a good rod for 1/8 oz lures? 1/8 oz is my go to size/weight and the spinning rod I presently have (ML) struggles a bit loading with 1/8 oz …
I think that rod will work just fine! Line diameter could be a big part of your casting too.
I also have some experience with a KastKing product which is the Perigee ll medium light/fast 6' 7" spinning rod. I consider it to be a well-made and reliable product.
However, instead of a KastKing reel, I chose to use a reel from Cadence the Elate 2000 which I spooled with 6-lb. monofilament. You are familiar with KastKing but what experience do you have with Cadence products?
Great video Ethan but now I've got to spend another 100 bucks on a Kestrel ultralight. There are worse things to worry about.... blessings my friend
Lol you absolutely don’t need to! I don’t do these videos to encourage owning tons of ultralights. I just do them to compare and contrast so I can help folks get the right rod from the start
The kastking braid isn't bad for the price, but boy do I get a lot of wind knots with the 6lb! Might try the 8lb to see if its any better or switch to an ester line
Good to know! This was the 13x for reference. Not sure what kind you are using - I think they have a few.
@@FishAnything ahhh okay! I've only tried the 8x so maybe I'll give that shot
How much would you recommend this reel ??
Have you tried their bfs baitcaster??
I prefer Daiwa or Shimano reels over this.
@ thank you sir. I was looking at this combo but wanted input on how good it is.
How would you compare it to the MajorCraft Finetail SUL you reviewed?
This is a faster action of the two. The Majorcraft would be better for moving baits whereas this would be better for jigs.
I’m digging your canoe.
What’s the brand and model?
Old town discovery solo 119!
How do you attatch your braid to mono? Ive done double uni, alberto, and fg but they keep slipping or snapping
So I do a double uni knot. Usually go 5 wraps braid, 4 wraps leader.
@@FishAnything thank you!
Would you recommend this rod or the diawa presso UL?
Hmmm that’s a good question. I prefer Daiwa as a brand, but this rod is solid for the price. I think if you want a travel rod, go for the Daiwa. If you don’t need a travel option, get the Kestrel.
I have the kestrel reel . I don’t like it too much and selling it . Used twice . The rod looks good though.
I like the rod for sure. The reel I need to use more to form a full opinion.
👍 try that reel on your presso rod perfect match
For sure! I’ll do that
Do the Mule jigs holg up well, bluegills are destroying sliders
The plastics are all hyper-stretch options with durability as a key focus. Bluegill will not rip them.
Andrew Knots removed the clicked mech in the drag knob. This fixed his drag issue
I will play around with it!
If you can only have one UL rod what would you get?
My favorite is still the Dobyns Sierra Trout & Panfish 6’2
Yeeew, nice UL Rod 🤘🔥
#Foconoultralight
Thank you :)
That's the weird part about many Daiwa and Shimano lighter reels. Here almost all 1000 I see are like "D" for deep spool. So they make it tiny just to put 150m of 0.20mm on it? Can't cast that far with those lures, not that kind of fish to run so far, even more limited casting range if you use line as fat... So add 100m(+weight!) underlaying one by default? It's so weird.
As for the rod, at 5' something total it's very close to my longest multipiece rods taken apart. So I would probably go for a single piece short ultralight. Just not for the 90$. Doesn't tick some of my boxes. Decent rods are very cheap these days. Almost cheaper than Rapala lures 🤣
What is the location of this lake?
I cannot fish with a small rod like this one never could the shortest rod I can fish with is a 6’6’
Personal preference is a crucial part of gear selection. I find that I can happily use any length ultralight. The 6-7' range is probably the most comfortable though.
I am not yet sold on paying more for the Kastking gear than I would have to pay for say a Diawa Presso rod and Legalis JDM reel.
I know the quality of the Diawa stuff at even less cost but no experience with the Kastking even though it is at a more premium price point.
Yeah you need to stick with what you’re comfortable with. For me, I’d 100% rather go for a Daiwa or shimano reel, however this rod is pretty solid for $90 so it’s still a good option.
11:33 The drag probably sucks because it’s carbon fiber, because all these reel companies think cArBoN FiBeR wAsHeRs aRe bEtTeR, when in fact carbon fiber is not better than felt FOR ULTRA LIGHT FISHING, YOU BOZOS. It’s all marketing. You want smooth, delicate, felt washers for ultra light. Think you’re gonna hook a 1000 pound tuna at the park pond? These are the same guys that think 10 lb line and a medium action rod is finesse fishing. You don’t need carbon washers. The felt washers will eventually need to be replaced but these garbage 90% plastic reels won’t last long enough for it to ever be an issue.
what makes felt ideal?
100%
@ifish had a good vid on drag settings. I think he either greased his carbon discs or put in some felt on his kestrel. I really don’t use drag on my setups as much, but might try in the future.
I appreciate the perspective. I am not much of a fan of having to modify gear right out of the box. I will play around with the felt drag washer concept, but to your point, if a reel is made for ultralight fishing, why use parts that aren't ideal?
Channeled his inner Nard-dog in this video.
Roodododo da dooooo
Hey Tony send me one too please thanks Tony
😂😂
@@toneycopen 😆
Very generous of Toney :)
TH-cam selling adds for a Chinese fishing gear company.
All your grear us made in chinese anyway