what type of sealant are you using? i used three bond putting a 357xp together, and on both sides of they cylinder it was leaking, i even let the three bond dry all night before i put gas in it and tried, cant believe how quickly you spread that sealant, put the cylinder back on and then go right ahead an start it. im planning on taking my cases to a machinist to have it decked
Curious as to what's the main focus with porting a chainsaw? I know quite alot when it comes to cars. But do you focus on exhaust out or air in or combustion chamber or the whole lot. Keen to know is all. Take it can be done by hand also?
@@TheCuttz1984 a 2 stroke is all about scavenging!!! So all port work is in regards to that!! Timing,port time area,transfer flow caractoristics,even squish band to a extent!
bought them on ebay - www.ebay.com/itm/Replacement-Twist-n-fuel-or-oil-cap-for-Stihl-Chainsaws-many-models-READ/323420048743?hash=item4b4d564d67:g:xKAAAOSwK3ZbhtND:rk:6:pf:0
Without Thread-locking fluid? Liquid Seal only in one Side? I know that you dont need the whole Tube .... But you still need some on all surfaces! Its Not a Game to put such good saws together.... Take your time - It's worth it!
Whe n yoou do your work on this saw, what saw would it compare to now with its power gain? Can you send me contact information so I can get in touch with you regarding doing work on my saw? Thank you. You can FB Messenger me with this information. Look forward to speaking soon.
Master at work, I'd say. Watched 5 times now, terrific job. If I can take a lesson, that'll be great.
Excellent job! Would you happen to have a video on how to make the vise? It's cool!
Good timing ! i noticed that you updated the leaked fuel caps, looks much better. Looking forward to the next stages.
Great, greetings from homeland off Stihl
greetings
Excellent Video. 2 day project done in 15 min.
He’s cleaned that muffler out pretty good!
love the chainsaw vice. Its cool to see a pro at work. Makes it look so easy.
Good job, being shadowed by the best. Thought I recognized that work bench. From Tennessee
Ok now your just showing off. Good job nice video
I love chainsaws they are a blast to wrench on because nothing is difficult! I find it quite relaxing.
Master at Work! Love it.
Nice job ,I can do my 359 pretty quick. Surprised to see no lock tight or ant vibe washers on the exhaust.
Awesome bro thank you
:)
He’s fixing that up with speed .... almost as fast as Cooter Davenport
Y have a ms 462 how many psi she must have after 10 tank of mix and haw many oil y must mix with stihl hp super 2,4 pour cent?
You are the Best. Great.
thanks!
You slick bastard.... I love it.you tha man...
lol. thank you sir
Hi ,we're abouts did you get the fuel and oil caps from
Would have been 13 minutes if the decompressor would have cooperated. ;) Sounds fantastic!
I know it's Stihl written on the cylinder but I believe that looks like a Mahle.Do you have any info regarding this?
Awesome!
I have one My friend thanyou for help to teach
very impressive sir!!!
thank you sir
I'm korean. 이야~ 여기와서야 sthil의 분해조립을 한번 구경해 보는구나!!
hello, the fuel caps are different, where can you get them ??
what type of sealant are you using? i used three bond putting a 357xp together, and on both sides of they cylinder it was leaking, i even let the three bond dry all night before i put gas in it and tried, cant believe how quickly you spread that sealant, put the cylinder back on and then go right ahead an start it. im planning on taking my cases to a machinist to have it decked
Dirko
@@Redbull661 thank you so much for that, i looked it up and found it. actually has a Stihl part no. im going to give it a try
don't need a lot.
ben faccone there’s a reason the Germans know what there doing.
Good stuff right there.
Why does the exhaust port look so rough ?
Harika süper👍🏽👏👏
Curious as to what's the main focus with porting a chainsaw?
I know quite alot when it comes to cars. But do you focus on exhaust out or air in or combustion chamber or the whole lot. Keen to know is all. Take it can be done by hand also?
deck the cylinder, adjust the port timing on exhaust, intake, and transfers, advance the timing, mod the muffler
@@Redbull661 thanks for the reply.
What does that setup normally cost to do
@@TheCuttz1984 a 2 stroke is all about scavenging!!! So all port work is in regards to that!! Timing,port time area,transfer flow caractoristics,even squish band to a extent!
So stock is 6hp...after your massage we talking 7ish?
Man I could never get into using those ring compressors they get on my nerves bad lmao
Perfect😲
Hae oils ?
Where can I get that chainsaw vice
You’re forget one screw
It is on the bench left corner 😂
How can I make that chainsaw Stand
Haha good times gentelmen.
BA
Why you open decopretion volve
Very good video,lets see some cutting.
I have a few vids of it cutting. check my other videos.
Where do you get those fuel caps ?
bought them on ebay - www.ebay.com/itm/Replacement-Twist-n-fuel-or-oil-cap-for-Stihl-Chainsaws-many-models-READ/323420048743?hash=item4b4d564d67:g:xKAAAOSwK3ZbhtND:rk:6:pf:0
Without Thread-locking fluid? Liquid Seal only in one Side? I know that you dont need the whole Tube .... But you still need some on all surfaces! Its Not a Game to put such good saws together.... Take your time - It's worth it!
Cylinder and piston manufacturer?
OEM
@@steppoffaith8426 i mean brand sir
Would you like to sell this saw
Working by Romania! Very dirty!
Whe n yoou do your work on this saw, what saw would it compare to now with its power gain? Can you send me contact information so I can get in touch with you regarding doing work on my saw? Thank you. You can FB Messenger me with this information. Look forward to speaking soon.
No need gasket tub
You don't have airgap geage