Epic for returning the mention to Binky. Super cool to hear these series calling each other out. I dont even want to think what Yoda and Nik would create together.
Agreed. Its so weird. All my car channels I follow on TH-cam are crossing lines.. its like when all your favorite TV shows cross each others universes.. its trippy! Especially since TH-cam is my actual TV. I don't have cable/satellite.
In 12 hours, Al can make the entire fuel line setup, with regulator, sensor, and pump. In 12 hours, Nik makes a bracket to hold a wiper motor for the rear window. Al's work doesn't look factory, but it works. Nik's work looks factory, then he changes something else and has to build it all over again. These two are entertaining to watch, and to compare.
As a former parts guy, THANK YOU SO MUCH FOR TELLING PEOPLE TO DO THEIR RESEARCH!! I never sold AN fittings but I sold a ton of brake lines. The concept it the same, Figure out what size, thread, and how long you need BEFORE going to the store. I cant count how any times I've have to spend almost an hour with a customer trying to piece their whole brake system together with adapters and straight lines cause they are too cheap to just buy a roll of brake line and a $20 flare kit.
11pm CST here in America and I’m about to go to bed.....until I see Australia 20 hours ahead of me upload yet another amazing video!! God Bless Skid Factory and friends.
The tips and how-too's you get from Al are priceless, i learn more from these fellas in a few episodes than a year from anyone else! Love it boys and thanks heaps.
I bet doing something Al says is good is like having 10 proud dads telling you they are all proud of you at the same time. Props on the project Binky ref! KEEP THIS GOING FOREVER!!
Do a beer with Al and a bear with woody give us your back stories and car history's 😀 Keep up the deadly work 👍good family guy impression on the fone too😂
Man, I'm building my car, and I wanted to use AN lines to replace the 25+ years old fuel lines from the tank to the engine bay, this is perfect. And as usual very well explained! Thanks for your incredible work, keep it up!!
Thanks for explaining the design process that goes into this, when you see a build as crazy as this you wonder how it will ever work, but broken down into bite size chunks it makes perfect sense. I don't know what you're charging Millsy for this but it's not enough
8:00 to 8:30 what you said is 100% true. Haveing worked as a tech and as a parts guy ive seen both sides of frustration when it comes to this stuff. Great work love this project
Came here to watch a mad man put a mad engine in a mad van for a mad friend and end up learning about hoses and fitting. What a great channel this is. :D
This has some amazing information about fuel line systems. Also, the plumbing really help me out. I'm planning on building my 2J to single, in my garage. Well I wanna get the mechanical work done. I'll go and see the pros for electrical stuff (ECU, tune etc) FYI : STOCK INTERNALS alright Internet, GO!!!
Wait for the beer fridge in the back, 18 way electronic seats from an audi, pop up speakers, and mood lighting. Somebody has the bring those guys back to reality sometime.
Nice tips, Alan. Its getting there, so be happy its gonna be another great project on your list :) Woody, wear hat like Alan, doesn't hurt that much when you hit "the can" :) Can't wait for next episode!
Was just about to comment on the Bad Obsession Motorsports reference and theirs was first comment in the list 👍🏻👍🏻. All the toolfoolery in the shed and a hand riveter? Figured you have one of the only available in Australia cordless ones or an air riveter at least FYI one of the best tools I bought last year kept my tendonitis at bay during sled season and while doing all the tin work in my drag car.
It's just amazing how two guys hot so much knowledge. I bet turbo yoda could do this work with his eyes closed and his hands tied behind his back haha!
![THE SKID FACTORY - Barra Powered Bedford Van [EP11]](http://i.ytimg.com/vi/s2wnKLqbVxM/mqdefault.jpg)
![THE SKID FACTORY - Barra Powered Bedford Van [EP11]](/img/tr.png)
![THE SKID FACTORY - Barra Powered Bedford Van [EP12]](http://i.ytimg.com/vi/7x0KMPdFB-w/mqdefault.jpg)
![THE SKID FACTORY - Barra Powered Bedford Van [EP13]](http://i.ytimg.com/vi/2L5CrarCdIM/mqdefault.jpg)
![THE SKID FACTORY - Barra Powered Bedford Van [EP14]](/img/n.gif)
Herbert the Bedford Parts Guy.
He's got a 10mm spanner in his pocket. Grab it for him?
lmao Get over here you sexy sum bitch
Has me lolling for real....
Already dying from the Herbert the pervert phone call 😂😂
For real!! LMAO it was perfect too!
Bad obsession Motorsport want the van
Matman Logie I was like 4WD mini? Sounds like the lads from Shropshire. That would be so awesome
HA! I though I heard the reference in the latest Project Binky!
I'm pretty sure the bit about AN fittings being suitable for high pressure power steering lines was a dig at Nik
lol the Bedford would last 5min in the UK with all the rust that's already in it.
I think the van would rust away into nothing by the time Binky is done hahaha
Y'all never disappoint. The banter between you guys and Bad Obsession is the best thing on the internet to date.
Epic for returning the mention to Binky. Super cool to hear these series calling each other out. I dont even want to think what Yoda and Nik would create together.
That would be brilliant.
It would be suicidally fast and epically perfect.
and take 3 years to build..lol
Project Binky Episode 1 was posted August 17th 2013, almost exactly 5 years ago ;-)
Agreed. Its so weird. All my car channels I follow on TH-cam are crossing lines.. its like when all your favorite TV shows cross each others universes.. its trippy! Especially since TH-cam is my actual TV. I don't have cable/satellite.
the buyer from the UK wants a rear window wiper on it.
In 12 hours, Al can make the entire fuel line setup, with regulator, sensor, and pump. In 12 hours, Nik makes a bracket to hold a wiper motor for the rear window. Al's work doesn't look factory, but it works. Nik's work looks factory, then he changes something else and has to build it all over again.
These two are entertaining to watch, and to compare.
Recon!
And keyless motorized hood. And possibly a tea pot
who is nik?
any_given_grind from Bad Obsession Motorsports, the guys doing Project Binky
Shit yeah fellas keep the lemon squashes flowing
as a matter of fact, I've got one now. :-)
As a former parts guy, THANK YOU SO MUCH FOR TELLING PEOPLE TO DO THEIR RESEARCH!! I never sold AN fittings but I sold a ton of brake lines. The concept it the same, Figure out what size, thread, and how long you need BEFORE going to the store. I cant count how any times I've have to spend almost an hour with a customer trying to piece their whole brake system together with adapters and straight lines cause they are too cheap to just buy a roll of brake line and a $20 flare kit.
The lovefest between Bad Obsession and The Skid Factory is so cute ;-)
11pm CST here in America and I’m about to go to bed.....until I see Australia 20 hours ahead of me upload yet another amazing video!! God Bless Skid Factory and friends.
The tips and how-too's you get from Al are priceless, i learn more from these fellas in a few episodes than a year from anyone else! Love it boys and thanks heaps.
I bet doing something Al says is good is like having 10 proud dads telling you they are all proud of you at the same time. Props on the project Binky ref! KEEP THIS GOING FOREVER!!
Do a beer with Al and a bear with woody give us your back stories and car history's 😀 Keep up the deadly work 👍good family guy impression on the fone too😂
Lemon squash ;)
Opps thats what I ment 😉
ThANks for the ANducation. The details you shared concerning the varieties of A/N obviously come from much experience.
Been watching since March or so, thank you for such in depth, hands on, how-to knowledge bombs in every single episode.
Man, I'm building my car, and I wanted to use AN lines to replace the 25+ years old fuel lines from the tank to the engine bay, this is perfect. And as usual very well explained! Thanks for your incredible work, keep it up!!
Bro! Love the Bad Obsession Motorsports reference!
Really can’t wait to see this thing completed!
You never fail to put a smile on my face, guys. Plus, we get the added bonus of seeing some top work. Cheers
Thanks for explaining the design process that goes into this, when you see a build as crazy as this you wonder how it will ever work, but broken down into bite size chunks it makes perfect sense. I don't know what you're charging Millsy for this but it's not enough
Thanks for all the extended explanations especially about hose fitting great job
Al sharing the knowledge on this one! Excellent as always. Thanks guys.
The Project Binky Reference at the end!
You are aware of the Millsy reference to Skid Factory in Ep 18 of Project Binky, right?
Al love your no bullshit straight to the point wrenching great job guys!! Can't wait to hear that thing roar to life.
This series is just getting better and better.
I'm sure Moog doesn't get enough credit for the music in this show. Yay done a great job m8.
RandomTuber782 I always enjoy it too man. Give a nod to Moog.
This is better than anything on tv and most things online. love it.
These are getting nothing but better every episode..
That was a great video guys. Loved it. I never knew that the AN on the fittings stood for Army Navy. Love the little bits of knowledge.
Great series and great episode. Thanks for sharing your knowledge and experience with the wider car tuning community.
damn you Skid Factory! Always uploading right before I have to go to bed. I already pulled the video up though, so I guess I have to watch it now...
just seeing you guys putting the stuff on the underbody just makes my spine shiver, but then i remember you don't have any bad weather in Australia
Man this was some good info for me. I have a bunch of 100 series bits that I have yet to assemble and the advice in this video was tops!
What an opening... Nightmares for weeks!
8:00 to 8:30 what you said is 100% true. Haveing worked as a tech and as a parts guy ive seen both sides of frustration when it comes to this stuff. Great work love this project
Came here to watch a mad man put a mad engine in a mad van for a mad friend and end up learning about hoses and fitting.
What a great channel this is. :D
im thinking about doing the trans cooler myself and the explanation of AN fittings and hose helps heaps, cheers AL.
Good video AL on AN fittings. Great explanation of different types. The build I believe has been a long one with a bit to work out.
Learning something every time I watch. Way better than school.
This has some amazing information about fuel line systems. Also, the plumbing really help me out. I'm planning on building my 2J to single, in my garage. Well I wanna get the mechanical work done. I'll go and see the pros for electrical stuff (ECU, tune etc)
FYI : STOCK INTERNALS
alright Internet, GO!!!
The info about AN fittings was super helpful. Have been wondering how exactly they worked for a while now, cheers!
Love how you guys explain thing! The skid factory really scratches my mechanical itch!
Quite informative, well explained and great videography. I'm enjoyin' the hell of of this build Al.
Well, that buyer in England won't need the Bedford van to tow the race-mini for another four or five years, so don't worry about it.
At least! :-P
haa haa at least that but remember it could be already done but slow to edit and post the vids lol
Dan Hard - I heard they already crashed it
funny you say that because that's my joke comment there haa haa but in serious I hope not
Wait for the beer fridge in the back, 18 way electronic seats from an audi, pop up speakers, and mood lighting. Somebody has the bring those guys back to reality sometime.
These videos have gotten so much better recently, well done guys! Keep'em coming!
That last bit with the face of customers. Lol. I know that feeling!!
Love the respect between you and the bad obsession guys. I did wonder if you would of known about them mentioning the Bedford.
Nice project binky shout out at the end
I think Woody should "get the funk out" while Al makes some brackets !
Just keeps getting better and better. You guys are legends, keep up the great work!
The most expensive fitting, and very rarely used, is the 360deg fitting.
but I'm wondering if a straight or 180 is a better choice 7:01
😂
The 360 fitting is not that uncommon, nearly all bmw have them between their blinkers and blinkerfluid reservoir.
Ya VW too, all the German cars do for emblem cooling
Tip - two 180 fittings are cheaper and work just as well.
Seriously bros, best part of my week is coming home and u two dudes have uploaded another episode... fkn awesome!
Love to hear the wisdom from Al.
Thank god,, had thought you guys had forgotten me. I've decided to do the same to my TD Cortina Mk III six cyl 4 speed. Keep those vid's coming.
So many good tips in this ep. Thanks very much for the education.
That could be a epic t-shirt with Herbert the Bedford parts guy on it
These intros are gold. I feel ya on all the hard work and the van potentially being sold off for possibly more profit.
Thanks for watching.... Keep your woody in a van....
Love the bad obsession motorsport reference :D
The camera work and editing getting better and better every single episode. Keep up the cracking content boys
Herbert the Bedford parts guy... The ice cream truck rear door lock only works from the outside, not the inside. Beware kiddies!
gjmob free candy
Hope it is coming to the uk ... can't wait to see it around , keep up the good work guys
shouldnt have watched that intro late at night, the whole house is up, haha bloody terrific fellas
These videos should be used at every tech school - they are brilliant
Best car show on the net by a long long way .
Digging the drum and bass soundtrack, neat.
Love the funny reference to the bad obsession boys. Love this build
Good dash tutorial, did my teflon oilfeed for my 200sx two years ago :)
Gold! Love the link to Binky and follow up to Richard’s comment re: Milsey..
Nice tips, Alan. Its getting there, so be happy its gonna be another great project on your list :)
Woody, wear hat like Alan, doesn't hurt that much when you hit "the can" :)
Can't wait for next episode!
Between you guys and Bad Obsession Motorsports the Internet is on fire. Keep it up
MAD WORLD OF FITTING AS THANK YOU FOR DETAIL VIDEO
Great knowledge shared! Thanks mates.
You Al and Woody are amazing
That Herbert impression was on-point.
Both the mini and the bedford are high class builds they would work well together
Was just about to comment on the Bad Obsession Motorsports reference and theirs was first comment in the list 👍🏻👍🏻. All the toolfoolery in the shed and a hand riveter? Figured you have one of the only available in Australia cordless ones or an air riveter at least FYI one of the best tools I bought last year kept my tendonitis at bay during sled season and while doing all the tin work in my drag car.
I love following this build! Cant wait to see it run!
Hey! I know those UK guys! You better hurry up and get the Bedford finished - They tell me their 4-wheel drive mini will be ready any decade now!
after recently doing all this AN fittings stuff, youve made it look so easy
good advice on the fittings cheers fellas
Wow this series has grown in popularity, lots of views!
Al trying to hold back the laughter is amazing.
Thanks for all the knowledge and know how Turbo Yoda! We really appreciate it !
Hopefully the Mini will be finished by the time the Van is shipped over... Wishful thinking! Epic to have some UK/AUS automotive youtube Banter!
It's just amazing how two guys hot so much knowledge. I bet turbo yoda could do this work with his eyes closed and his hands tied behind his back haha!
Hahaha, could see that coming at the start.. so good. Love how you guys are putting in more humor. So much value in these. Thanks again guys! ;)
I almost died at that opening part…
you are so pro allan! if i ever come to australia its will be to make you turbo my chevy 305!
Best episode ever 😂 from Herbert to “that’s the jokkkkke”
Solid 😂 good work lads
35:33 absolutely killed me... Bad Obsession Motorsports and MCM working a charm (you'd probably fit Binky in the back of the van) =)
Al you are an auto-mechanical genius!
That Herbert voice was super on point
Great AN fitting knowledge drop
All the 'little stuff' are actually the most important and difficult many times, thanks for the lessons. Btw, Bob is my uncle,,Keith is my Dad.
Dad gave me the same advice. "Dont mount anything without rubber. Especially if it has a large hole"
Great episode guys keep em going!
Hahahahaha holy shit. Bedford parts guy is 10/10 every old car parts shop. I work in the diesel & turbo parts industry and that is my entire life.
HOLY SHIT, that tip cutting the hose is amazing
The BOM shoutback made my day. XD