I've had the same problem and I found this video. Very good solution and tutorial. This solution worked for me as well. So thank you very much and well done!!!
HI- from my understanding, and looking throughout the fuse boxes there is no fuse for this motor - if there is no power, the problem might be in the rubber sleeve where wires are going through from frame into rear lid. wires might brake inside,
The problem I have is, every time the rear wiper does a sweep back and forth it makes a sound like a long scratch noise, do you think the internals just needs lubrication like you did to yours?
It is a possibility, one more thing You can check is the wiper blade itself, if it is old- the rubber gets hard(sun and weather helps in this) so it might be just the blade that squeaks.
I had the same problem, I followed the instruction and cleaned the motor and greased it, but sadly still not working the problem is when I measured the voltage not always it was on and off 12 V, what could be the reason? btw, my motor was as rusty and dirty as yours :D
it could stay always on 12v if You use different speed setting, for constantly on it will show You 12v constantly. If You are getting lower voltages it might be the connectors fault- it might be rusted
@@DIMOGENTE the keep pressing same button which activate the windshield wiper washer is working So it means if same button long press works, this should mean that one click is working too, right?
This would be in the perfect world 😃, I would strongly recommend to do this , for even better results, in my case i would have to do this every year, to have it working - I did not wanted to put the extra time in cleaning the rust, my goal was to have it working quick 😃
I've had the same problem and I found this video. Very good solution and tutorial. This solution worked for me as well. So thank you very much and well done!!!
I am happy it helped You
My friend, at least I'm from Russia, but I understood you without translation thanks for the video, I'll go now to fix it on my car.
Thank you, this fixed my problem. Just needed a bit of cleaning and lubrication.
This is great
Hi.. Awesome video.. But i don't have any voltage in the scart...where is the fuse? Or have any rele?
HI- from my understanding, and looking throughout the fuse boxes there is no fuse for this motor - if there is no power, the problem might be in the rubber sleeve where wires are going through from frame into rear lid.
wires might brake inside,
@@DIMOGENTE thanks for your answer.. I'm going to investigate that.. 👍
The problem I have is, every time the rear wiper does a sweep back and forth it makes a sound like a long scratch noise, do you think the internals just needs lubrication like you did to yours?
It is a possibility, one more thing You can check is the wiper blade itself, if it is old- the rubber gets hard(sun and weather helps in this) so it might be just the blade that squeaks.
I had the same problem, I followed the instruction and cleaned the motor and greased it, but sadly still not working
the problem is when I measured the voltage not always it was on and off 12 V, what could be the reason?
btw, my motor was as rusty and dirty as yours :D
it could stay always on 12v if You use different speed setting, for constantly on it will show You 12v constantly.
If You are getting lower voltages it might be the connectors fault- it might be rusted
@@DIMOGENTE the keep pressing same button which activate the windshield wiper washer is working
So it means if same button long press works, this should mean that one click is working too, right?
@@rajabghabour9948
well- yes the switch must work- only question is about relay is it working or not.
I took it out and checked it with direct 12 v line and it opend and closed properly , so I think it works well@@DIMOGENTE
Great instructions but think you should have clean the rust off with a wire brush first before applying the Grease
This would be in the perfect world 😃, I would strongly recommend to do this , for even better results, in my case i would have to do this every year, to have it working - I did not wanted to put the extra time in cleaning the rust, my goal was to have it working quick 😃
I have opel
Corsa 2011 1.3 cdti boot of the car is not opening with the rear button can you please make a video for the same
I can not promise it right away but wen I will get a chance i will try to take a video of it!
Mucho gracias thank you sir
Genial por favor, hope it helped You
Quite !🤗