Classic Vauxhall Corsa D boot lock fault. Common problem. How to. Save ££££

แชร์
ฝัง
  • เผยแพร่เมื่อ 24 ส.ค. 2024
  • How to guide to go about fixing a boot lid fault on a Vauxhall Corsa D. Go to near the end of video to hopefully save yourself a few quid before you buy a new lock mechanism.
    Music:
    Cinematic Motivational Piano
    Comat Sounds
    Zephyr
    Academy
    Indian Walk
    Nico Staf

ความคิดเห็น • 13

  • @SuperPOGMAHON
    @SuperPOGMAHON 4 วันที่ผ่านมา

    Thanks very much mate..this saved me a load of time and money..I went straight to the handle cleaned all connections and little release button worked perfectly..cheers👍👍👍

  • @richardmcdermid3567
    @richardmcdermid3567 หลายเดือนก่อน +1

    Thanks for the video. It helped me save a good bit of money by not putting it into a garage. Cheers.

    • @trickyg9130
      @trickyg9130  หลายเดือนก่อน

      Glad it helped. Seems a common problem on the Corsa and probably a lot of other cars.

  • @Cavalier_Steve
    @Cavalier_Steve 9 หลายเดือนก่อน +1

    Nice fix Rich, just a couple of note worthy things to keep in mind the locking/unlocking in a short space of time can cause the central locking to lockout for a time period, even my Cavalier does this and I have seen other car manufacturers do the same thing, I think it’s so it doesn’t flatten the battery if a micro switch or other component malfunctions. Like you said the inner boot skin will get condensation on it in cold weather. Nice video though mate well done.

  • @Namnodnol
    @Namnodnol 6 หลายเดือนก่อน

    Got the same symptoms on my Corsa D so will follow your guide to clean all the parts. I might also try to make a rubber seal to sit between the outside of the handle and the bodywork to try to prevent water ingress. Thanks for posting this.

    • @trickyg9130
      @trickyg9130  6 หลายเดือนก่อน

      Glad, it’s helpful. Many thanks.

  • @Sandra-tm4qi
    @Sandra-tm4qi 2 หลายเดือนก่อน +1

    how did you clean up that corrosion from the small clip? i can't seem to open it without breaking

    • @trickyg9130
      @trickyg9130  2 หลายเดือนก่อน +1

      I soaked it in wd40 and used a small draper pick tool. Sorry for not getting back sooner, hopefully you’ve sort it.

  • @michaelflint4159
    @michaelflint4159 2 หลายเดือนก่อน +1

    Its piss simple. 2 screws,pull the plastic off. 2 more screws ,remove wire. Refit in reverse. 40 mins and im no mechanic

  • @stephenthomas3476
    @stephenthomas3476 หลายเดือนก่อน

    Where did you get replacement lock from

    • @trickyg9130
      @trickyg9130  หลายเดือนก่อน +1

      Hi. Just got one from a company off eBay, I’ve used them before for some other bits and pieces. Should be around £20/£25.

    • @stephenthomas3476
      @stephenthomas3476 หลายเดือนก่อน

      @@trickyg9130 thanks

  • @tunnel7
    @tunnel7 4 หลายเดือนก่อน +1

    cheers but ditch the backing track..