Hey, good job mate! A little tips: to avoid doing a full turn when you reach 360° you can use slip ring to rotate infinitly If you don't want to use slip ring you can invert y axis and put x axis to 0 (if x reach 180, you put x to 0 and you do y = y * -1) it will turn x of 180 and turn y to stay on target, this way you cut by half the time antenna is not focusing drone. (but it require a little bit more code)
Thanks for that info I an really happy the way this thing has come together! For the type of flying we do and where it will be located I suspect it will work out just fine but its always nice to know alternatives appreciate that. Happy Flying I know I cant wait to test it out fully cheers Bill
Hey many thanks for that its appreciated. TBH I am really loving this tracker, I have wanted one for years but its always been cost prohibitive until now. This one works really simply and effectively. Watched some of your vids and see your in FLA I am a regular visitor there for 32 years now but never been to Melbourne never know we may catch up some time over there. Cheers Bill
Great build Bill I thoroughly enjoyed the video and I really like after seeing the video it's funny now but it's putting the compass on it I've never done that with my Eagle tree Eagle eye and now I'm going to copy you and do it and it's the same thing on that it has to point true north great job looking forward to more videos take care
Thanks Robert the build was really enjoyable and I think this is a great product. I am really looking forward to flying for real with this kit. Glad you enjoyed the video even though I made a mistake lol won't happen next time out. Happy Flying Bill
It sure will I cant wait for better weather to use it properly. The fact that this thing works without adding anything to the models is a big plus for us. Totally enjoyable build and TBH its really compact when folded up winner all round! Happy Flying Bill
Great work dude liked ur model quite Simple im from a college drone club team Can u please tell or explain what PCB you used can u share the model or the PCB you designed it yourself
Hello, I am writing to you from Italy and I congratulate you on your tracker antenna system. I wanted to ask you for advice. I would like to install the tracker antenna system on a rc car with my VRX Walksnail, but not having a flight controller on board the car, what would I need? Thank you
It does not need to know its position only where North is. Then it takes the Telemetry information from the plane and determines its 3D position relative to North.
Good job.... But you forget to put 1 more Algorithm..... Put the identified movement to the center of the frame.... thus the camera aren't pushed away if the source of movement comes from outside of the frame
As I pointed out on my video on more than one occasion the problem was me not pointing to the North whist setting up, not anything to do with calibration.
Hey, good job mate! A little tips: to avoid doing a full turn when you reach 360° you can use slip ring to rotate infinitly
If you don't want to use slip ring you can invert y axis and put x axis to 0 (if x reach 180, you put x to 0 and you do y = y * -1) it will turn x of 180 and turn y to stay on target, this way you cut by half the time antenna is not focusing drone. (but it require a little bit more code)
Thanks for that info I an really happy the way this thing has come together! For the type of flying we do and where it will be located I suspect it will work out just fine but its always nice to know alternatives appreciate that. Happy Flying I know I cant wait to test it out fully cheers Bill
@@BillHally You're welcome, how much cost the whole system to build out by curiosity? (without antenna and tripod)
@@Teddy78fra Around £115 which aint half bad TBH
I'm your 1,000th Sub! Congratulations Bill! I am keenly curious about this tracker for my -new obsession- fixed wing fleet!
Hey many thanks for that its appreciated. TBH I am really loving this tracker, I have wanted one for years but its always been cost prohibitive until now. This one works really simply and effectively. Watched some of your vids and see your in FLA I am a regular visitor there for 32 years now but never been to Melbourne never know we may catch up some time over there. Cheers Bill
Great build Bill I thoroughly enjoyed the video and I really like after seeing the video it's funny now but it's putting the compass on it I've never done that with my Eagle tree Eagle eye and now I'm going to copy you and do it and it's the same thing on that it has to point true north great job looking forward to more videos take care
Thanks Robert the build was really enjoyable and I think this is a great product. I am really looking forward to flying for real with this kit. Glad you enjoyed the video even though I made a mistake lol won't happen next time out. Happy Flying Bill
Hi, does the eachine receiver work fine? Its quite cheap so I am wondering if it works good? I have heard good things about it though
Happy flying!
Yes working fine for me I updated it to some custom firmware and never had a problem.
That will be great for my Long range fpv models.
It sure will I cant wait for better weather to use it properly. The fact that this thing works without adding anything to the models is a big plus for us. Totally enjoyable build and TBH its really compact when folded up winner all round! Happy Flying Bill
Great work dude liked ur model quite Simple im from a college drone club team Can u please tell or explain what PCB you used can u share the model or the PCB you designed it yourself
Kit bought link in these comments
Hello, I am writing to you from Italy and I congratulate you on your tracker antenna system. I wanted to ask you for advice. I would like to install the tracker antenna system on a rc car with my VRX Walksnail, but not having a flight controller on board the car, what would I need? Thank you
Hi there I am not sure if the unit is capable of working with Walksnail you will need to contact the makers to ask this. Thanks
Rssi or gps??
Nice work!! I will definitely be trying one of these. How’s it working for you now?
Works great for me one of the best things I ever made!!
Where do you get the main board with all the smd components??
www.virtualpilot.co.uk/
do you have to take into account magnetic declination when pointing the tracker north?
No just north and it works just fine.
does the tracker have a GPS module in the 3D printed box?
No GPS
@@BillHally okay. how does the tracker know it's own position then?
It does not need to know its position only where North is. Then it takes the Telemetry information from the plane and determines its 3D position relative to North.
Can you share the link where you bought the kit? Thanks.
If you would have read the comments you would have found this already!
@@BillHally Got it; thanks.
Good job....
But you forget to put 1 more Algorithm.....
Put the identified movement to the center of the frame.... thus the camera aren't pushed away if the source of movement comes from outside of the frame
Errr What? You got me there!
Hi,Sir
Can i buy one to Ukraine Army Air Defence Unit?
You could almost mount a go pro on it and film following the plane lol
Anything is possible on the 3D printer!
so uhh...youtube put this in my feed, and i dunno wut this thing is supposed to be for though ?
Welcome to the wonderful world of TH-cam lol
This should help you fix the offset
th-cam.com/video/mvK7wuOq09w/w-d-xo.html
As I pointed out on my video on more than one occasion the problem was me not pointing to the North whist setting up, not anything to do with calibration.