Check the condition of the gear due to over loading
ฝัง
- เผยแพร่เมื่อ 2 ต.ค. 2024
- #CheckTheCondition #OfTheGearDueToLoading
#AmazingThing
#AmazingTechnology
Truck body,
Pakistani truck,
Truck maker,
Truck repair,
Repairing truck,
2020,
2021,
Truck videos,
Не ну так каждый может, взял новую деталь и поставил. Надо было по Пакистански: корпус планетарки заварить гнутыми электродами, а шестеренкам зубья нарастить ею же и болгаркой подравнять! 😂😂😂😂
I enjoy this thoroughly. No bullshit overdriven intro, just getting straight into the intriguing problem and working on it with very little to use. I hope the content format never changes
The intriguing problem is them. They are the cause of all these failures since they don't assemble the transmissions following the proper guidelines. Just because it works doesn't mean it will last. And they obviously don't!
@@MrCheckmateMarine you are right. It wont last long. There are some delicate procedures overstepped here that will result in premature failure- one being the improper tightening that is performed in several areas of the repair. I would never reference this for anything other than just enjoyable to watch, especially for what little they have to get it going. Not educational.
@@jameskuberski9621 The point is is that they could be so much better for so little extra effort. But they will not bother. They are too dumb or too lazy to bother. That is the real problem.
Muito bom comentario..com tão pouca ferramenta fazem um bom trabalho..
Great Job. You should let the video finish until the gear is put it back on the Truck. 😉. Greetings from Panamá.
The best part is the whole family on any age is there to take it for future may god bless the whole crew proud of you
Yey child labour, hurray!
@@ckra2001 Not quite as bad when those boys are working beside their fathers/uncles. The adults in this case won't (usually, anyway) overwork and/or abuse them.
Are you smoking crack its child labour and they aint learning much that trans is completely fucked and they are making a poor attempt at rebuilding it
Young mechanic : On how many N/m should that bolt be tightened.
Experienced mechanic: 3 moderate hits with the 1.5 kg hammer.
Hah😂
Maybe they could make that work, but I rather doubt I could!
@@dennisyoung4631 ..
Always a good idea to film the taking apart so when assembling one can have some guidance!
Lmao
@@Justme-jt1ef These guys could do this in their sleep. They probably done hundreds or even thousands of them and it’s just automatic
@@Radionut lmfao
Real professionals these team..they know how to dismantle and install without missing anything.. hats off.
No manual or torque wrench just sheer experience. I think one of them trained in Germany when he said "Gutentight"!
The team work is amazing good job guys I like watching your videos.
Thank you sir
These guys have never seen a torque wrench in their entire lives....
Skilled lil' dudes, though..
Impact wrench? Nope. Torque wrench? Nope. Snap ring pliers? Nope. Hydraulic press? Nope, we're good.
There are other vids on YT of Pakistani truck mechanics that show them using all of those except the torque wrench. One even has one guy working an albeit older electrical machine that adjusts a diesel fuel pump for the proper injection order.
I love how his sons are watching and assisting their father with the tear down and re-assembly! They too will become talented men as their father; May God Bless the family!
They all are little geniuses
Their father will end up very proud
Pure talent love it
It amazes me how he remembers all parts to put together in sequence. These are genius mechanics. Wow!
I was thinking if I did this job I would have to take loads of pictures, number label every part. Have a massive line of order where the first one off is the last one back lined up. Bolts in labeled bags and it would take me days to complete. I also would be using power tools to speed the process up but still take me longer.
see the video recording 😂
I bet he does 3 a day,
@@E69apeTheMatrix420 uy
A genius or even mildly intelligent mechanic wouldnt fit bearings with a hammer in a filthy environment unless he wanted the repair to only last a short time.
Love these vids.. how many Pakistani does it take to rebuild a transmission? Answer: 5.2 five grown men and two boys.
It amazes me what these guys accomplish with less than ideal conditions and far from the manufacturers recommended tools, etc, and make it work...
i wonder for how long....
@@danieltaon7333 for long as need be
Oh it will work even if a chimpanzee would have done it, but it won't hold for nearly as long as if everything was built according to manufacturer specification. I would never have let them to fix my car gearbox after have seeing this.
@@dtiydr I agree, just amazes me that they can tear it apart and get it back together, I can get anything apart, but, putting it back together and working......
@@DonLuc23 Just have an order to where it should go and put it in such a way that it cant be put wrong and it will work fine. Or take photo just before you take on thing apart and then its just to go through the pictures and you will know exactly where everything will need to go.
Excelente trabajo,éso es lo que llamo trabajar en familia ,dios los bendiga siempre, resive un cordial saludo desde Puebla México 🇲🇽
I was gonna say "how the heck do they keep all that straight with so many helping" but i've seen the trucks and how theyre driven, these truck workshops defo have job security
pretty good job, we're spoiled over here in America, but this is down and dirty work right here. get're done!
Bhai bohat awla video.bass eik suggestion hai.part rebuild abd vehicle mein refit honay kay baad driver ki comments dalo.ap ki intl audience hai unko samjh ayay gi.thanks
ماشاء اللہ بہت زبردست ویڈیو ہے۔۔۔"ساحل کے سکوں سے کسے انکار ہے لیکن طوفان سے لڑنے میں مزا اور ہی کچھ ہے"😊
Excellent job, no manual required.
Brilliant at the 15.00 minute mark, re-assembling the gearbox while talking hardcore on the cellphone. Natural born genius.
That takes some doing to get all that back together . I'm impressed 😊
No, it’s very easy. To an uneducated dumbass it would seem complicated though.
@@waynerainey2606 Angry?
Si alguien leer en español lean y esto y me dicen porque:
Soy colombiano y desde que veo estos vídeos de mecánica y reparación de estos indues me pregunto porque aquí en colombia los mecánicos tienen el bendito problema de que se demoran meses en reparar un motor o meses en entregar un trabajo, porque...
Y veo estos indues tan talentosos trabajando en equipo y a la fija, te desvaran te dan con el chiste del daño y ya te entregan tu carro o moto rápido solo es cuestión de horas, entonces porque aquí en Colombia le dan tanta vuelta al asunto no comprendo...pero bueno
Would make a great movie “ 6 guy’s and a gearbox “.🤣
these are real mechanics, they understood how it works and work as a real team, great !
Fantástico trabalho
Parabéns
👏👏👏👏👏👏👏
I like watching all your videos, you guys are so great!!!!!
10:57 clamping a shaft that seats a bearing or a retainer in the vise leaves marks that spoil the seating.
I made several adaptations of "jaws" of copper, leather, nylon and wood to my vise, I have them with round and square fittings, so as not to mark the objects and pieces.
Very comfortable interesting content
I have to give these guys some credit... they are a pretty good team, are pretty damn clean considering the conditions and are getting shit done. Of course we are discussing easy to work on machines however... because you aren't doing this shit on any modern truck or car, I can promise you that.
There's always that one person, you are him on this video.
@@jimbossemi-customs3129 So you're saying I'm "The Man" then? Much obliged
@@SquillyMon Sure, that's it. Enjoy being "
The Man"
@@jimbossemi-customs3129 COOL!!!
@@SquillyMon Have a great day my Squilly buddy!!
Companies don't need proving grounds , just send your machinery to pakistan
Overloading, on a pakistani truck? Now thats a first.
Всё норм 😜,не могу понять одного, нельзя сделать приспособы, съёмники,чтоб не валить по подшипникам молотком....?!
Этим проверяется уровень мастерства)) хотя не понятно вроде коробку могут перебрать но на остальных видосах когда двигатель собирают даже порядок обтяжки не соблюдают. Похоже когда в городе появляется новая коробка появляется и организация которая ее обслуживает и перебирает раз в неделю.
Transmissão é como montar um quebra cabeça, quebrou o redutor, as engrenagens , interessante os anéis de câmbio, marchas, good work 🚜🌾
Excellent Job.
I've done a few myself but off course, using Air, power tools.
Really enjoy watching your Videos.
Keep up the good work.
Salutations from Ohio, USA.
Overloading
In Pakistan there's no such thing
You just put your faith in the elephant face man
And 8 legged man
You will arrive in your destination
Some will say
That's India's
Its sama same
Different name
Same
Sht
Well. Question from a 🇩🇪 ZF guy with +40 years experience. How long is that gearbox gonna last until it fails again? At least you got cheap labour. 😁
They stripped the sun gear and destroyed the planetary gearset......
Once I was on a very full village bus in Goa India and as it slowly lumbered up a slope, when suddenly was this ripping sound as the gears of the rear end stripped out and the bus came to a halt. Naturally everybody got off the bus and walked.
This lead mechanic would be a mechanical engineer in almost any other country where he’d have had some more opportunity. Dude has skills! Where is this Pakistan? NW India? No indicators, no digital micrometers and not one damn torque wrench anywhere, and they get the job done!
I love watching these guys ! Like a colony of bees getting at it ! Working together ; helping each other as a team ! It's amazing how they're all on the same page ! It's almost as if they wrote the Parts & Assembly catalogue and manuals themselves !! No one Leader ; they all just pitch in and get it done !!
Awesome skillful work! & I really admire the way the whole shop attacks the issue at hand as a team 👍🏾 and know leftover mysterious pieces like my DIY work 🍺
Thank you for a amazing video, just wanted to know how much is charged for this job.
Amazing how fast they work ! They have funny voices too …
I bet I know how that finger got pinched!
Grandes mecanicos!!!abrazo desde Argentina
This is just real amazing mechanical work
Of course it was overloaded! Have you seen those trucks in India?!
These guys can't get parts so they have to fix everything with minimal tools...very impressive.
Just so much fun to watch master mechanics at work. Very impressive.
Nice team work, I wish I have that in my work 😞👍👍👍👍👍👍👍
Probably the owner voided the warranty. Is this the truck we saw taking an entire village?
Wrong hammer to do that ,should be brass
"Amazing Thing Technology#1" should be renamed "I have a hammer so I am now an expert."
Nothing like having a 12 year old repairing transmissions... and let's make sure we use steel to beat the shit out of other steel parts to ensure they are forever damaged and will come back shortly. It's called job security.... animals... pure and simple animals.
Parabéns mestre.
This is the same transmission they repaired last month and re used the oil.
😂😂😂😂 I ALMOST believe that....
I was gonna make the comment that it looks like that has been opened up recently
5 guys working on one gearbox, I’m curious would all these guys be getting paid?
Totally amazing it never ceases to amaze me that every single component part of any given vehicle seems to be readily available off of the shelf
Except that part that they mentioned the price on most likely had to be ordered and shipped to them....
They blow up so many transmissions, axles, engines from overloading, lack of matainance, crappy roads that's theres plenty of parts to go around.
Who gave dislike try to do this
Me at the end: Why 3 gears got left over? Maybe those are just extra not needed
Parabéns .essas crianças ...vão ser os futuros engenheiros 🇧🇷🇨🇮👏👏👏🤝🤝🤝
These little boys will never lack anything when they grow in adulthood due to wider exposure to practical engineer at young age to that gentleman behind all these I offer my deepest salute to him ,his name will last forever and his legacy.🙏
Unfortunately they live in poverty all their lives struggling to make ends meet
@@tuffguy8656 Quite unfortunate to hear that 😟😟😟
Those boys are probably "freelance helpers" that hang around the area, quite common in the third world (I'm from the 3rd world). Shop owners (some are former helpers themselves, some are sons who inherited the shop from their fathers) call them whenever they're needed to assist in working on a workpiece then get paid after the job is done, then off to another shop that might need their help, be it a machining shop, radiator, or battery repair, even construction, etc. They are what you call jacks of all trades.
The logic behind this system is it wouldn't be financially sound for the shop owners to keep any of them on a regular daily payroll since their shops don't get a steady stream of jobs.
Those boys should be in school but since their families can't afford it, they do manual labor to help put food on the table.
In our country, kids might want to go to school since it's free anyway, the problem is lunch money, bus fare, etc. And besides, their parents need their help to earn a living.
For a number of reasons and maybe luck, some of them makes it big in their adult life, but most don't.
I want to see till it run on the truck 🙏
Next time
Their torquemeter is a hammer.
De memoria saben donde va cada pieza, son fabulosos.
I love this..just doing it.
Mui buen trabajo le encanta ver con los pocos recursos que teneis los grandes trabajos que haceis saludos desde españa
Due to overloading ? I didn’t think they knew that was a thing 🤣
Make a list of tools wanted/needed. I have spare tools as I am sure other mechanics do also.
How much did you charge the customer to install a $375.00 dollar part ??? Extraordinary rebuild.
Whole engine they rebuild and reinstall in 200$, parts price are separate.
Who needs power tools when they have power hands
Great job of dismantling & reasdembling
5 person team at work...who needs power tools?
Like Racing pit oompa loompas
Во молодцы !!! Почти,как мои деды лендлизовскую технику ремонтировали, без талмудов, без динамометрических ключей, всё по наитию и РАБОТАЕТ !!!
Тоже интересно. Раскидали в десять рук, как знают откуда что. Ни моментов затяжки, ни приспособ, молоток и зубило)))
Если в Пакистане коробку ремонтирует 5 человек,то сколько человек будет в Индии коробку ремонтировать 😁
Вау, новая запчасть !! .. думал заварят , и зубья болгаркой нарежут
Well at least here they actually replaced the part as opposed to welding it together
Imagine if they had power tools
Love watching these videos
Muito bom. Parabéns. Saudações do Brasil.
These guys make my puny mechanical aptitude and experience look totally inconsequential!
The Gear box is the most complex part in an automobile ! For these guys ofcourse dismantling and fixing them back is a piece of cake , every day affair 👌😃
When they hammered the bolt and nut with a hammer and thus totally don't care at all for any torque spec or pre lube any glidning surface or needle bearing, just make me feel sick when ppl call them pros. Not pro.. just not.
14:53 reverse idler gear , The old man has been inside a gearbox or 2.
Grandes mecânicos sem o mi mi que existe aqui no Brasil.com poucos recursos fazem um excelente trabalho.
N.
That planetary would be 2k here in the states
so easy lol I can do it on my own but after I’ve finished 😁 2-4 big nail screw still lay around
how many of these people who are
now in USA doing backyard mechanic???
Always solving problems. No bullshit, no moaning about conditions or not having proper equipment. Just get in there and get it fixed! Fantastic!
Oof, that's a screwed gearbox...
Excellent job. Thank you for the great video. Congratulations. Mitar Belgrade Serbia
How does this guy put all those parts back together from memory............................................
That is one tore up planetary
鉄粉が けっこうありますね😅 それだけ削れてるってことですね
直すのにいくらぐらいかかるんですかね
Many hands make light work ,even young ones .
Man! that planetary gear is toasty. How much stuff was that maniac trying to carry?
All of it. 😁
Love watching them teaching the young kids on how to do thing's
Exelente profissional e equipe parabéns a vcs..top..
👍👍👍👍☕