Things I'd recommend buying to help you (Please note links listed here include affiliate links which may earn me a commission) Corsair Commander Core XT: Corsair - go.corsair.com/q4Ar0Y Amazon US - amzn.to/3Gta92f NewEgg - newegg.io/nc2eabee7a BestBuy - bestbuy.7tiv.net/9gMyaW Amazon UK - amzn.to/3wSMaVC Amazon FR - amzn.to/3lRD1HL Amazon IT - amzn.to/3GvT2wv Amazon DE - amzn.to/3wSNIyP Amazon CA - amzn.to/39X2Qn7 Corsair USB Splitter: Corsair - go.corsair.com/5gM1Pj Amazon US - amzn.to/3Px603F Amazon UK - amzn.to/3Px5UsP Amazon FR - amzn.to/3pnMpsc Amazon IT - amzn.to/3z4KCKX Amazon DE - amzn.to/3r0JRk8 Amazon CA - amzn.to/3wUtxSr
For someone who's about to build their first pc and is using multiple fans this video is an absolute lifesaver. A thorough yet easy guide that perfectly explains how to set everything up. Thank you!
Im coming from a non RGB build and will upgrade to a new build including rgb fans, I was so confused on how to do this but after watching this video it all makes sense now. thank you sir
Hey man thanks for making this video, super helpful and detailed. I'll be building my first pc with 6 LL120 fans in the Corsair 4000d Airflow and your videos have been awesome. Way more efficient and intuitive to watch this than going solely off the manuals and reddit threads.
This is brilliant yet again, so much thought and effort goes into your videos. I am about to build my first PC and this is exactly how I will be doing the fan setup. Well done and keep these videos coming.....
@@TheProvokedPrawnshould i use the commander core XT if for example i install 3 120mm fans on front (intake) 1 in the back (exhaust) or the first method with the 3 pack controller (rgb) is easier? Might put radiator near the front on the future too
I literally fell as sleep almost by just listening ur voice U have a very soothing voice lmao Other than that great tutorial vid surely helped me fitting my rgb fans
Thank you! you saved me. I bought this like 2019 and today I changed power supply unit and the rgb controller was massed each other. Watched this video and reorganize it and boom. by the way I like your voice man so good.
I did this to my new pc I built back in 2020 and I tell you that was the hardest part. Putting everything else together was easy. Also takes up so much space inside the case. My case Lian has an area that houses all the cables and its so packed its going to be super hard to replace my power supply eventually. I'm running 10 fans though.
I was freaking out because I thought the Sata connector was meant to be connected in the motherboard and I couldn't find it, thanks to your video I realized that it is meant to be connected to the PSU, thanks a lot for the detailed explanation!!
Your video helped me immensely. The longer I watched, the more questions I had. However, by end you had answered every question I came with, I thought up as I watched and even some I didnt know I needed answered 😅. Thank you.
You are the absolute greatest! I’m building with a iCue 5000T RGB Case and your video on that and on this are perfect. Thank you. You gained a big fan today.
I was having trouble with my Corsair iCUE 4000X RGB case fans. I had plugged everything in and booted, they lit up to their default rainbow but then shut off and were undetectable by iCUE. The solution was to unplug them, boot the PC to iCUE, then hot plug the SATA power connector, then hot plug the USB connector. iCUE then recognized everything. Amazing video and your camera work is great. As well as your voice.
Hi i bought the same case and built it today, but i realized i have only 3 sys fan on my mother board for the 6 fan i have in the case, i thought 2 node core would do it but only for rgb, you think i need sys fan splitter right?
This is Michael. Thank you for taking the time to do this. It is very helpful. Corsair has also done an excellent job by putting together not only the best looking R GB fans, but the hubs and the software to run them, not to mention the great cases. I'm planning a 5000 T build Right now and your video is helpful for establishing how the other fans will work. I plan to use the newer Q L120s because they look better, And will substitute them for the AIO cooler fans as well.
This is the best video and the only one that gave me the info I needed. The pc I built today was my first with rgb and your video is the only thing that helped me understand I forgot the sata cable for the rbg 😂
Thank you for this great video! I've been wondering how to set up rgb/argb fans and also control the fan speeds. I didnt even know that rgb/argb fans have two cables until I watched thsi vid. More power to your channel!
Corsair REALLY needs to come up with a way to daisy chain their fans together as Lian Li did.. My first build has 10 QL fans, definitely am overwhelmed with the amount of cables I’ve got to try and manage! Along with Lian Li Stimers, luckily I got a 011 XL case but it’s still hard, my last hurdle today is figuring out how I can connect the triple 8 pin Strimer cable through the bottom as there’s no room! Gonna have to move some things around to make it work
@@PerryDaPlatapus it’s actually really simple, I’m surprised it’s taken this long for someone to do it.. Honestly, you’ll still need the hubs! By the way CPU’s are going, we’re going to need 9 fans minimum in every build!
@@TheProvokedPrawn it did actually I had 13 fans all together and the cables are an absolute nightmare good thing the 5000D has the shut case thingy or I wouldn't have to throw up by looking at the back haha
Thanks for this! My corsair fan kit came with an RGB hub, but I've never used one before. This was a whole new thing for my PC and I wasn't sure what to plug into where. I've been running them without the RGBs for several months now because I couldn't figure out what to do with the hub. Then I finally googled it cause I want the RGB that I paid for. Much appreciated! The one frustrating thing is that my non modular PSU only has a single SATA power cable daisy chained into two connrctors so I either have to put my SSD somewhere on the outside or put my hub in the area with the drive bays and run my RGB cables back there somehow.
Thank you so much! I was wondering where to connect the SATA power cable from the controller into the power supply (no matter how obvious it sounds) and after countless videos, yours was the one. Thank you
The biggest and soul issue at the stage is financial. Has stated on another one of your videos I'm looking at the 7000d airflow and I want to light it up with 12 120 fans. I was curious about the USB headers as well as the fan headers and how to balance that out with that many fans. I may have to go over this video again but I think you pretty much covered all the bases. Thank you, sir.
I'm currently running 13 fans in my 5000D, 6 QL connected to a commander core xt (front and side), 3 LL & 3 ML around the h150 capellix's commander core (push pull), 1 LL exhaust, 6 light strips (lighting node pro + rgb hub). Cable managment is quite fun, but has been put on hold as I plan on replacing the LL push rad fans with QL fans. The cool thing about having the ML fans on top (pull) is the RGB lighting coming through the Corsair triangle cutouts of the top panel reflect on the wall, surprisingly nice little touch for now. Always love your videos, so nice and detailed.
Bloody hell this looks like a god damn nightmare. I feel substantially more confused. The only thing this video helped me with is knowing to buy a case with nearly all of it's fans preinstalled, which was the case with the Lian Li cases I purchased last year. All I had to do was install the radiator fans up top with was only 2 or 3 cords. But this video definitely helped me knowing what I want to avoid. I was literally minutes away from ordering 3 dozen Corsair cases that did not have fans included for our new offices. And I was searching for buying Corsair fan packs in bulk to install them all. I am going to be taking extra time tonight to find a different company. Mate you helped me dodge a massive bullet, I cannot thank you enough, big thumbs up, cheers!!!!!!
Thankyou! I have the corsair h150i elite aio and it was really straight forward but then I bought a 3 pack of LL 120's that came with the little led connector and didn't want to run a bunch of wires to system fan hookups. I'm so glad I can use the hub that came with the corsair aio kit as I already had it setup and cable managed lol. That hub is so much better of a system.
I'll likely not go with RGB fans, but at least now I know about getting a double or triple splitter cable so that I can power all my fans, if I don't have enough headers on my mobo. Thanks!
Thanks for this video. I plan on doing 13 Corsair fans in my 5000D build. Should I use 2 commander cores and a rgb hub or is there a better way to run the 13th fan?
At 9:32 what is the bare controller under the RGB hub? I have 5 RGB Fans connected in order to the bare hub in a 4000x and only have 1 getting RGB which is also not controllable. Any ideas?
Man, I've spent 2 days learning about the nuances of fans and rgb controls, picked my aio/fans twice only to realise something important was out of stock now reluctantly going for corsair lol. I really didn't expect fans/rgb to be the most annoying and confusing part of learning how to build a PC!
Hey man, so i my case already has a built in fan hub, but i’m honestly so lost with it in the manual, and what i wanted to ask is can you connect both 4 pin and 3 pins fans to the command core xt? then you connect it to a 4 pin fan header, because i read that if you connect it it to a 12v fan header and your fan is 5v it will ruin your fan. Once again love your videos they’re very informative!
This is the 3rd video I've watched and so far yours is the best and detailed. I have a Micro ATX motherboard and im only seeing 3 system fans on it but I have 5 fans... Anything i can do?
Thank you for this helpful video, it helped me a lot, but I have a questions. I can't find any references or documentations on the "PWM Fan Hub" that comes with the case "CorsAir 7000D Airflow". My questions is; the cable that is labeled "PWM" from that Fan Hub ,is it getting connected to the MB Chassis fan and which one? I have a ASUS ProArt X670E. Thank you so much.
Excellent video - Lot of wires now when you add lot of fans in to system now. Did build on lower spec I7 g4 with just 3 Fans recently. The next Computer will build probably be a big one - (Main PC), likely to use I7 G12+ CPU, Asus Z790 board, so Will a 5 Fan Solution be a good solution. I probably buy a Corsair 400D Case, Corsair, 850W Power supply (min) and probably use the two provided case Fans for top / Back but Buy the DeepCool FC120 3IN1 Case for the Front of the case
Nice vid just subbed! Currently got 6 added fans and the 3 that comes with the 5000x case. My 3 fans work but i cant adjust the speed or rgb. Had mine built by someone so im trying to learn it all from scratch.
This handy, but wondering about when you have the ROG Fan Controller box too and then Corsair's AIO cooling. If that can be plugged into the ASUS Controller or need both.
Hello finnaly i find nice explanation. I have sharkoon t6 and didnt know where to plug in sata cable from rgb controler. You explain here xable of sata ant then i power supply? Thanks. Because i didnt get colours working and fans yes without sata cable..
I bought Corsair iCUE H170i lcd Elite XT, can I plug in 6 more fans in Commander Core witch came with AiO or some of connections on Commander Core are already busy with fans from AiO? Hope you understand my question 😂💪
My new Corsair AIO came bundled with the Commander Core. I have 6 total Corsair fans going into my system (3 from the AIO and the other three an LL120 Triple pack) I only need to use this Commander Core for this build? Also, what the heck is the difference between the Commander Core and the Commander Core XT? I have an old Commander Pro AND the RGB hub from the previous build. Do I just not need them anymore since the new AIO came with Commander Core? Also, do a video on how to neatly cable manage all of these 😂😂😂
upgrading from a 220t corsair case, to a lian li 216 case I also just recently bought a h150i elite lcd cpu cooler, should I used the fans from corsair or just later upgrade to all lian li fans?
Hi, I'm curious. Let's say that a mid range mobo only has one or two argb header, my question is, how many argb fans can you connect to a single header if you have limited amount of them. Of course, all of them are connected to a hub. Same goes for the fans, how many of them can you connect to a single header since some of them are 1 or 2A headers
Great video. One question. I have the Corsair 7000X case with the Commander Pro XT and the Corsair H170 with another Commander. Should I daisy chain to one single USB 2 Header or use Two USB headers? Also do I still need to plug in the PWM cable from my 7000X to the motherboard or is it not needed. Thank you.
If all the fans are connected to the Commanders then you won't need to worry about the PWM controller. I would use two USB headers though, there's usually less problems there
Wait so if I have 3 fans that come with my antec case and a 3 Corsair fan pack, can I use the hub for all of them?? That would be so convenient 😭. I’m starting my first Pc build on Wednesday and I’m nervous!
Im just setting up my first PC Build als with an Airflow 4000D RGB with 3 preinstalled Fans, in addition i bought another fan for the backside and the H100i AIO Cooling system. Do i need to buy the Commander Pro aswell as the Commander Core or is the Commander Pro enough?
Things I'd recommend buying to help you (Please note links listed here include affiliate links which may earn me a commission)
Corsair Commander Core XT:
Corsair - go.corsair.com/q4Ar0Y
Amazon US - amzn.to/3Gta92f
NewEgg - newegg.io/nc2eabee7a
BestBuy - bestbuy.7tiv.net/9gMyaW
Amazon UK - amzn.to/3wSMaVC
Amazon FR - amzn.to/3lRD1HL
Amazon IT - amzn.to/3GvT2wv
Amazon DE - amzn.to/3wSNIyP
Amazon CA - amzn.to/39X2Qn7
Corsair USB Splitter:
Corsair - go.corsair.com/5gM1Pj
Amazon US - amzn.to/3Px603F
Amazon UK - amzn.to/3Px5UsP
Amazon FR - amzn.to/3pnMpsc
Amazon IT - amzn.to/3z4KCKX
Amazon DE - amzn.to/3r0JRk8
Amazon CA - amzn.to/3wUtxSr
if i want to put 12 silent wing 4 on my PC, but only 1 fan per purchase is available, what should i get in addition to connect them all ?
For someone who's about to build their first pc and is using multiple fans this video is an absolute lifesaver. A thorough yet easy guide that perfectly explains how to set everything up. Thank you!
Glad it helped! Hope you enough to subscribe
Likewise here!!
Im coming from a non RGB build and will upgrade to a new build including rgb fans, I was so confused on how to do this but after watching this video it all makes sense now. thank you sir
Glad to help Mark :)
I originally found you playing Cuisine Royale, and now I find you doing this, in a time where I'm building my first PC. I'll definitely be back.
Ahh Cuisine, how we miss you.
Well, this was encouraging. I wasn't sure how to handle more than six fans, but now I have a guide for that. Thanks!
Thank you so much, man. You're a real one. I've been trying to get my RGB fans working for almost 3 months now
Hope they're all good now
Hey man thanks for making this video, super helpful and detailed. I'll be building my first pc with 6 LL120 fans in the Corsair 4000d Airflow and your videos have been awesome. Way more efficient and intuitive to watch this than going solely off the manuals and reddit threads.
👍
I would recommend instead buying the 4000D Airflow QL version - it comes with 4 QL 120's and then only needs a 240mm AIO
This is brilliant yet again, so much thought and effort goes into your videos. I am about to build my first PC and this is exactly how I will be doing the fan setup. Well done and keep these videos coming.....
Thank you Russ. Hope it helps
Me too!…. 👏🏻
@@TheProvokedPrawnshould i use the commander core XT if for example i install 3 120mm fans on front (intake) 1 in the back (exhaust) or the first method with the 3 pack controller (rgb) is easier?
Might put radiator near the front on the future too
I literally fell as sleep almost by just listening ur voice
U have a very soothing voice lmao
Other than that great tutorial vid surely helped me fitting my rgb fans
😊 thank you
I didn't watch the video yet but I already know you're a life saver. Planning on doing a build with 7 fans and didn't know what to do :')
Thank you! you saved me. I bought this like 2019 and today I changed power supply unit and the rgb controller was massed each other. Watched this video and reorganize it and boom. by the way I like your voice man so good.
Excellent! Glad I could help. Hope you enjoyed enough to sub
I did this to my new pc I built back in 2020 and I tell you that was the hardest part. Putting everything else together was easy. Also takes up so much space inside the case. My case Lian has an area that houses all the cables and its so packed its going to be super hard to replace my power supply eventually. I'm running 10 fans though.
I was freaking out because I thought the Sata connector was meant to be connected in the motherboard and I couldn't find it, thanks to your video I realized that it is meant to be connected to the PSU, thanks a lot for the detailed explanation!!
Glad to help. Hope you enjoyed enough to subscribe 🦐
Your video helped me immensely. The longer I watched, the more questions I had. However, by end you had answered every question I came with, I thought up as I watched and even some I didnt know I needed answered 😅. Thank you.
👍👍👍 hope you enjoyed enough to subscribe 🦐
thank you for this video, i get my new case tomorrow that allows for 7 fans now i know what to do! Perfect timing for video upload.
Thanks for watching. Good luck with the build.
You are the absolute greatest! I’m building with a iCue 5000T RGB Case and your video on that and on this are perfect. Thank you. You gained a big fan today.
Thanks Charlie. Glad you found it helpful!
I was having trouble with my Corsair iCUE 4000X RGB case fans.
I had plugged everything in and booted, they lit up to their default rainbow but then shut off and were undetectable by iCUE.
The solution was to unplug them, boot the PC to iCUE, then hot plug the SATA power connector, then hot plug the USB connector. iCUE then recognized everything.
Amazing video and your camera work is great. As well as your voice.
Hi i bought the same case and built it today, but i realized i have only 3 sys fan on my mother board for the 6 fan i have in the case, i thought 2 node core would do it but only for rgb, you think i need sys fan splitter right?
This is Michael. Thank you for taking the time to do this. It is very helpful. Corsair has also done an excellent job by putting together not only the best looking R GB fans, but the hubs and the software to run them, not to mention the great cases. I'm planning a 5000 T build Right now and your video is helpful for establishing how the other fans will work. I plan to use the newer Q L120s because they look better, And will substitute them for the AIO cooler fans as well.
This video really helped me complete my sons pc. The sata cable had me going. Thank you.
Glad to help Yashin. Hope you enjoyed enough to subscribe
This is the best video and the only one that gave me the info I needed. The pc I built today was my first with rgb and your video is the only thing that helped me understand I forgot the sata cable for the rbg 😂
Glad to help. Hope you enjoyed enough to subscribe 🦐
Thank you for this great video! I've been wondering how to set up rgb/argb fans and also control the fan speeds. I didnt even know that rgb/argb fans have two cables until I watched thsi vid. More power to your channel!
Glad to help Jan
Best voice in the pc diy tech tip vid biz. And extremely helpful to boot. Instructional vids are impeccably shot, lit and edited. Much appreciated.
Appreciate you Space Monkey.
@@TheProvokedPrawn 😃
Corsair REALLY needs to come up with a way to daisy chain their fans together as Lian Li did.. My first build has 10 QL fans, definitely am overwhelmed with the amount of cables I’ve got to try and manage! Along with Lian Li Stimers, luckily I got a 011 XL case but it’s still hard, my last hurdle today is figuring out how I can connect the triple 8 pin Strimer cable through the bottom as there’s no room! Gonna have to move some things around to make it work
@@PerryDaPlatapus it’s actually really simple, I’m surprised it’s taken this long for someone to do it.. Honestly, you’ll still need the hubs! By the way CPU’s are going, we’re going to need 9 fans minimum in every build!
I managed all my cables and now I gotta redo it so I can plug in a fan I forgot to get. Either that or that one fan is defective which I doubt.
Seasonic have released daisy chain-able wireless fans (1 wire into 1st fan, then daisy chain next 1-2 if connected).
Super cool.
@@PerryDaPlatapus they could make a lot more if they make daisy chain like lian li
@@1eyek1ng corsairs new fans are looking promising when it comes to cable management now
where have you been lol I found 2 of your videos and both helped me understand how to hook up fans and psu cables now im subscribed
Thanks! I've got a playlist too - How to build a gaming PC: th-cam.com/play/PLlRFhsGPgCG9yKCHtL2_UnwSGitMqao5z.html
Yesterday I literally built my first pc and 7 fans didn't work and 6 did and this video came out of nowhere. Thank you provoked prawn :)
Hope it helps.
@@TheProvokedPrawn it did actually I had 13 fans all together and the cables are an absolute nightmare good thing the 5000D has the shut case thingy or I wouldn't have to throw up by looking at the back haha
The easiest to follow step by step PC guide ever great video
That's how I roll. Sub for more of the same.
Most pc builders wont go this crazy with soo many fans, but there are some that will. So it's nice to see how to setup this many fans.
Tnx a lot. It's so strange, I was wondering to add some fans in my 5000D AirFlow and here we go, just in time ur video.
Thanks for this! My corsair fan kit came with an RGB hub, but I've never used one before. This was a whole new thing for my PC and I wasn't sure what to plug into where. I've been running them without the RGBs for several months now because I couldn't figure out what to do with the hub. Then I finally googled it cause I want the RGB that I paid for. Much appreciated!
The one frustrating thing is that my non modular PSU only has a single SATA power cable daisy chained into two connrctors so I either have to put my SSD somewhere on the outside or put my hub in the area with the drive bays and run my RGB cables back there somehow.
This is excatly what i needed. Been stuck trying to understand, anyway big ups🙌
Glad it helped!
Thanks!
You're welcome. Smash sub to show your appreciation.
I didn't see this was a super thanks (TH-cam is rubbish at notifying about that). That's very kind of you. Appreciate the support!
Thank you so much! I was wondering where to connect the SATA power cable from the controller into the power supply (no matter how obvious it sounds) and after countless videos, yours was the one. Thank you
You are welcome!
NGL I was legit struggling with the fans lmao but this was definitely helpful
Glad to help!
That is one of the best tutorials I ever seen about these topics! Well done!👍
Thanks Antonello! Glad you liked it.
The biggest and soul issue at the stage is financial.
Has stated on another one of your videos I'm looking at the 7000d airflow and I want to light it up with 12 120 fans. I was curious about the USB headers as well as the fan headers and how to balance that out with that many fans. I may have to go over this video again but I think you pretty much covered all the bases.
Thank you, sir.
This is the best explanation I have watched
Thanks Joey. Hope you enjoyed enough to subscribe.
I'm currently running 13 fans in my 5000D, 6 QL connected to a commander core xt (front and side), 3 LL & 3 ML around the h150 capellix's commander core (push pull), 1 LL exhaust, 6 light strips (lighting node pro + rgb hub). Cable managment is quite fun, but has been put on hold as I plan on replacing the LL push rad fans with QL fans. The cool thing about having the ML fans on top (pull) is the RGB lighting coming through the Corsair triangle cutouts of the top panel reflect on the wall, surprisingly nice little touch for now.
Always love your videos, so nice and detailed.
Yeah cable management is a nightmare when you have lots of fans. Thanks for watching and the comment.
Bloody hell this looks like a god damn nightmare. I feel substantially more confused. The only thing this video helped me with is knowing to buy a case with nearly all of it's fans preinstalled, which was the case with the Lian Li cases I purchased last year. All I had to do was install the radiator fans up top with was only 2 or 3 cords. But this video definitely helped me knowing what I want to avoid. I was literally minutes away from ordering 3 dozen Corsair cases that did not have fans included for our new offices. And I was searching for buying Corsair fan packs in bulk to install them all. I am going to be taking extra time tonight to find a different company. Mate you helped me dodge a massive bullet, I cannot thank you enough, big thumbs up, cheers!!!!!!
Thankyou! I have the corsair h150i elite aio and it was really straight forward but then I bought a 3 pack of LL 120's that came with the little led connector and didn't want to run a bunch of wires to system fan hookups. I'm so glad I can use the hub that came with the corsair aio kit as I already had it setup and cable managed lol. That hub is so much better of a system.
Thank you very much for your video ! i'm looking for rgb information for my new pc during weeks, your explanation is very clear !!
Thanks Olivier, Return the favour by subscribing :)
Helped me build my Sakura Miku pc, thanks a million!
Only thing on my To Do List today is a 12 fan build in a Corsair 7000d Airflow so this is great to see 👍🏻
Wow dude. Thanks so much for this video. I'm new to building PCs. This video gave me the confidence to add/reorganize my fans. Fantastic video!
Glad I could help!
I'll likely not go with RGB fans, but at least now I know about getting a double or triple splitter cable so that I can power all my fans, if I don't have enough headers on my mobo. Thanks!
i have the same problem! if you have already gotten a splitter, which one did you get?
Thank you for this. I was having trouble wrapping my head around the best way to wire all of this stuff together
Glad to help Kyle. Hope you enjoyed enough to subscribe 🦐
ahh finally now this is the better way to explain GJ👍🏻👍🏻
Bro, my brain! Thank you so much for the video, so clear for me to understand.
Glad it helped! Hope you enjoyed enough to subscribe 🦐
@@TheProvokedPrawn oh definitely! Thanks for all the computer help!
Thank for the info. I am looking to build a new gaming rig with an AIO and RGB lights for the first time. Very useful video.
Glad I could help!
great tutorial and a great job converting tech to understandable language
Thank you. Glad you thought so
This is a great video. I have built about 3 pc’s now and added coolers to others and the mess of cables is always so confusing.
Thank you
Thanks for this video. I plan on doing 13 Corsair fans in my 5000D build. Should I use 2 commander cores and a rgb hub or is there a better way to run the 13th fan?
What cooler are you using? Two commander cores is easiest but if you're getting an Elite Capellix cooler then there's one with that
@@TheProvokedPrawn I’m getting a Corsair H150i Elite LCD so that’ll be three of the fans.
THKS friend exactly the video I needed cuz I'm building a 7000d too
Glad to help. Hope you saw my 7000D guide
Very easy to understand. Thank you.
Glad it was helpful! Hope you enjoyed enough to subscribe.
Can you use the Hub with non-Corsair fans? Or is it limited to just Corsair fans?
This is a really well done and thought out video.
Many thanks. I try to do this with all my videos, sub for more! 🦐
Thank you so much for making this video! It’s definitely going to help me with building my very first pc.
You're welcome. Thanks for watching. Hope you enjoyed enough to subscribe! :)
At 9:32 what is the bare controller under the RGB hub? I have 5 RGB Fans connected in order to the bare hub in a 4000x and only have 1 getting RGB which is also not controllable. Any ideas?
Man, I've spent 2 days learning about the nuances of fans and rgb controls, picked my aio/fans twice only to realise something important was out of stock now reluctantly going for corsair lol. I really didn't expect fans/rgb to be the most annoying and confusing part of learning how to build a PC!
They sure can be complex. Hopefully this helped though
Very detailed and informative. Cleared a lot of air. Thank you!
Thanks for watching. Hope you enjoyed enough to subscribe! :)
Great vid! Finally remembered to subscribe ;)
Thanks!
Just completed my build today in this case. Loving it, hard to get used to the newer vrm temps on the new cards.
This was awesome, its really going to help me with my Corsair 5000X build.
Watch this too th-cam.com/video/Aha7D5-ilQE/w-d-xo.html
awesome video, I have a Corsair 220t and I just purchased a 3 pack of sp120 RGB pros and 2 3 way fan splitters.
Thank you for your Videos. they are so helpful. Can you also do a video about setting CPU Fan in Bios please?!
Hey man, so i my case already has a built in fan hub, but i’m honestly so lost with it in the manual, and what i wanted to ask is can you connect both 4 pin and 3 pins fans to the command core xt? then you connect it to a 4 pin fan header, because i read that if you connect it it to a 12v fan header and your fan is 5v it will ruin your fan. Once again love your videos they’re very informative!
This is the 3rd video I've watched and so far yours is the best and detailed. I have a Micro ATX motherboard and im only seeing 3 system fans on it but I have 5 fans... Anything i can do?
You will need splitter cables or a Commander Core
Thank you for this helpful video, it helped me a lot, but I have a questions. I can't find any references or documentations on the "PWM Fan Hub" that comes with the case "CorsAir 7000D Airflow". My questions is; the cable that is labeled "PWM" from that Fan Hub ,is it getting connected to the MB Chassis fan and which one? I have a ASUS ProArt X670E.
Thank you so much.
I'm still confuse
Hi confuse
Excellent video - Lot of wires now when you add lot of fans in to system now. Did build on lower spec I7 g4 with just 3 Fans recently. The next Computer will build probably be a big one - (Main PC), likely to use I7 G12+ CPU, Asus Z790 board, so Will a 5 Fan Solution be a good solution. I probably buy a Corsair 400D Case, Corsair, 850W Power supply (min) and probably use the two provided case Fans for top / Back but Buy the DeepCool FC120 3IN1 Case for the Front of the case
can i use the hub with other fans? (not corsair ones)
I REALLY needed this video, thank you!
You're so welcome! Return the favour by subscribing :)
@@TheProvokedPrawn Already did! I'm binge watching your videos, right now. Great stuff 👍👊.
@@SofaKingA Appreciate you
Nice vid just subbed! Currently got 6 added fans and the 3 that comes with the 5000x case. My 3 fans work but i cant adjust the speed or rgb. Had mine built by someone so im trying to learn it all from scratch.
So what would you recommend to run 13 fans RGB/PWM?
Thank you so much for this video. This was the most helpful video ive come across regarding plugging cables in
I aim to please. Hope you enjoyed enough to subscribe 🦐
Absolutely love this video. Thanks a lot for sharing 🎉
thank you so much for explain easily and by one by
Glad to help. Hope you enjoyed enough to sub
Great video! Thanks for your hard work!
Would love to see a part 2 where you show putting them inside the case and cable management!
th-cam.com/video/Aha7D5-ilQE/w-d-xo.html
This handy, but wondering about when you have the ROG Fan Controller box too and then Corsair's AIO cooling. If that can be plugged into the ASUS Controller or need both.
Hello finnaly i find nice explanation.
I have sharkoon t6 and didnt know where to plug in sata cable from rgb controler.
You explain here xable of sata ant then i power supply?
Thanks.
Because i didnt get colours working and fans yes without sata cable..
I bought Corsair iCUE H170i lcd Elite XT, can I plug in 6 more fans in Commander Core witch came with AiO or some of connections on Commander Core are already busy with fans from AiO? Hope you understand my question 😂💪
Interesting and informative video as always. Thanks for sharing!…
Glad to help
My new Corsair AIO came bundled with the Commander Core. I have 6 total Corsair fans going into my system (3 from the AIO and the other three an LL120 Triple pack)
I only need to use this Commander Core for this build? Also, what the heck is the difference between the Commander Core and the Commander Core XT?
I have an old Commander Pro AND the RGB hub from the previous build. Do I just not need them anymore since the new AIO came with Commander Core?
Also, do a video on how to neatly cable manage all of these 😂😂😂
upgrading from a 220t corsair case, to a lian li 216 case I also just recently bought a h150i elite lcd cpu cooler, should I used the fans from corsair or just later upgrade to all lian li fans?
Hi, I'm curious. Let's say that a mid range mobo only has one or two argb header, my question is, how many argb fans can you connect to a single header if you have limited amount of them. Of course, all of them are connected to a hub. Same goes for the fans, how many of them can you connect to a single header since some of them are 1 or 2A headers
Great video. One question. I have the Corsair 7000X case with the Commander Pro XT and the Corsair H170 with another Commander. Should I daisy chain to one single USB 2 Header or use Two USB headers? Also do I still need to plug in the PWM cable from my 7000X to the motherboard or is it not needed. Thank you.
If all the fans are connected to the Commanders then you won't need to worry about the PWM controller. I would use two USB headers though, there's usually less problems there
@@TheProvokedPrawn thanks so much, really appreciate your reply.
Like always great, useful and helpful content. Hats off. 🍻
Thank you.
Can you also conmect other fans like my Alpenföhn Wing Boost 3 to the connector and use icue for them?
It s okay if i put 3 pin fan in a 4 pin hub?
Sir one request plz demonstrate all fans and aio fans connection and making a single color with all requirements and precautions.
Just go into iCue and set them to static colour?
14:16. One of the reason I ditched full ATX builds for ITX.
Thank you very much, this helped me alot
Glad it helped! Hope you enjoyed enough to subscribe 🦐
thank you this is life saving
You're very welcome :) Hope you enjoyed enough to sub!
The moment I heard your name I laughed so hard. I love it
Wait so if I have 3 fans that come with my antec case and a 3 Corsair fan pack, can I use the hub for all of them?? That would be so convenient 😭. I’m starting my first Pc build on Wednesday and I’m nervous!
Very helpful, thanks!
What if I want a 6 fan configuration but my motherboard has only 4 sys_fan connectors?
Fan splitters
Quick question whats the logic with the 1 side and front at top are blowing in and the front on top sucking or pulling out?
I’m setting up six Corsair RGB fans now. How do I know what direction the fans turn? For example if I want air coming in or going out.
This night help th-cam.com/video/uPIMv30Vs3w/w-d-xo.html
Im just setting up my first PC Build als with an Airflow 4000D RGB with 3 preinstalled Fans, in addition i bought another fan for the backside and the H100i AIO Cooling system. Do i need to buy the Commander Pro aswell as the Commander Core or is the Commander Pro enough?