I just bought one today, it'll be here in a couple of weeks. I'm not ashamed to say that, at 54 years old, this will be my first motorcycle. I'm hoping for good things and saving some money on gas for work. AND, some fun in between work.
I did get the carburetor from Amazon. I put a PWK 30 mm Flat Slide on my bike. I put a performance CDI for a CRF230 on it too. Better advance map and no rev limiter.
Seriously thinking about picking up one of these. Sound like it blows all the other 229cc chinesium 5-speeds out of the water. Please makes some more videos and how to's for any additonal mods you end up doing. Subscribed!
for the brake, cut the wires off flush with switch actuator at the reservoir, then take the two wires, strip the plastic off and connect the two together with a good connection. Test the headlight wires to find the hot wire that feeds the high beam, then wire it to the hot feed wire that goes to the headlight switch that is only active when the key is on,
I have 2022 Templar x 250. Assembled by powersports. Have not had a chance to go through everything to make it right. The chain is loose handlebars as well carburetor not good. Ordered NIBBI off Amazon did not seem to be the same as yours, do you have a link to your carburetor you bought.? Washington state rider. Naches, west of Yakima. Ride on.
www.amazon.com/gp/product/B09W5LMJZW/ref=ppx_yo_dt_b_asin_title_o07_s00?ie=UTF8&psc=1 here is the carb i bought Bill. Go over all the fasteners for sure, and grease all of the bearings and linkage. all my spokes were different tightness, so go over them also.
@@oregontrailrider I was wondering how or what you did to the choke to get cable to hook up do I need to on screw it or get the black knob off. Not sure, can you explain? To a slow Washingtonian.
@@billschorzman3455 unscrew the choke cable assembly at the original carb with the nut that fastens it. unscrew the choke knob from the new carb with the nut that fastens it. now you can slide the choke cable assembly in and tighten the fastening nut to the new carb.
Just got mine out together 2 days ago been ripping a little in the fields ,the exhaust pipe gets red hot my guess is the lean conditions. . Do you know what size jet I should put in the nibbi. Or did you order the pe30 and keep the jet that was in it?
I have not been to shotgun creek with this one yet, only huckleberry flats. I did have a kayo k2 230 that I took to shotgun creek before this, and it did not have adjustable suspension and was a handful on anything but gravel roads.
I just bought one today, it'll be here in a couple of weeks. I'm not ashamed to say that, at 54 years old, this will be my first motorcycle. I'm hoping for good things and saving some money on gas for work. AND, some fun in between work.
im 51, first motorcycles ever....no shame here either brother. i hope you enjoy it as much as i have been.
I did get the carburetor from Amazon. I put a PWK 30 mm Flat Slide on my bike. I put a performance CDI for a CRF230 on it too. Better advance map and no rev limiter.
Drill a small hole in the Air adjustment screw cap them thread a screw in it to pop the welch caps off
Seriously thinking about picking up one of these. Sound like it blows all the other 229cc chinesium 5-speeds out of the water. Please makes some more videos and how to's for any additonal mods you end up doing. Subscribed!
I will be making another video this week
The Templar actually has a 250, their other models have the 229
Plz make more videos I bought the same bike and I ordered the same carb u got
Just trying to learn a lil
1. How exactly would I disable brake start?
2. How do I wire the headlight to come on when ignition is turned on?
for the brake, cut the wires off flush with switch actuator at the reservoir, then take the two wires, strip the plastic off and connect the two together with a good connection. Test the headlight wires to find the hot wire that feeds the high beam, then wire it to the hot feed wire that goes to the headlight switch that is only active when the key is on,
What is the approximate REAR suspension travel? ... e.g. outside the shock. Thanks ...
I have 2022 Templar x 250. Assembled by powersports. Have not had a chance to go through everything to make it right. The chain is loose handlebars as well carburetor not good. Ordered NIBBI off Amazon did not seem to be the same as yours, do you have a link to your carburetor you bought.? Washington state rider. Naches, west of Yakima. Ride on.
www.amazon.com/gp/product/B09W5LMJZW/ref=ppx_yo_dt_b_asin_title_o07_s00?ie=UTF8&psc=1
here is the carb i bought Bill. Go over all the fasteners for sure, and grease all of the bearings and linkage. all my spokes were different tightness, so go over them also.
@@oregontrailrider I was wondering how or what you did to the choke to get cable to hook up do I need to on screw it or get the black knob off. Not sure, can you explain? To a slow Washingtonian.
@@billschorzman3455 unscrew the choke cable assembly at the original carb with the nut that fastens it. unscrew the choke knob from the new carb with the nut that fastens it. now you can slide the choke cable assembly in and tighten the fastening nut to the new carb.
Just got mine out together 2 days ago been ripping a little in the fields ,the exhaust pipe gets red hot my guess is the lean conditions. . Do you know what size jet I should put in the nibbi. Or did you order the pe30 and keep the jet that was in it?
Does this bike not have dash with a speedo and such ?
Yes it comes with all the street legal stuff. He just took his off and replaced with the hour meter
Post more videos
But will it do a wheelie? 🤔
That thing will wheelie. I wheelie my Brozz 229cc no problem
Did you just cut the tip off for the spark arrestor install or disassemble the silencer? I am looking at the Fisch as well.
my muffler had a removable insert pipe tip, I just unbolted it and removed it before installing the Fisch unit.
Can you put a link up for the spark arrestor ? Thx
www.amazon.com/gp/aw/d/B082FVSXH4?psc=1&ref=ppx_pop_mob_b_asin_title
Thanks for the link. Fricking expensive at $90!
I bought the Templar 250cc and it doesn't have rear pegs do you know if I can put them on somehow? Thanks for responding.
This is the templar x, it came with passenger pegs, I removed them.
How hard was this think to make street legal in Oregon
I am looking at the titan pro 250 have you taken this to shotgun creek ohv?
I have not been to shotgun creek with this one yet, only huckleberry flats. I did have a kayo k2 230 that I took to shotgun creek before this, and it did not have adjustable suspension and was a handful on anything but gravel roads.
where did you happen to get your bags I like them?
www.giantloopmoto.com/
How is it holding up, how many miles.
Doing good, and not sure how many miles, but hour meter is at 25 now.
How tall are you brother. I want get into riding on one those 250. I'm tall guy
I am just 5' 9" but I have a 32" inseam, i can almost flat foot it. This x model uses a full size frame, it would be a good fit for tall guys.
Is this the actual 250cc engine with 6 speed?
Yes it is
Is this a semi automatic
no, it is a 6 speed manual
which nibbi?
www.amazon.com/gp/product/B09W5LMJZW/ref=ppx_yo_dt_b_asin_title_o07_s00?ie=UTF8&th=1
Thanks man! Can you show more on how you connected the choke?
Motion sickness
Take some dramamine, or don't watch the video. If you only want to complain, I can imagine how you are in everyday life....