I like it! After it ruined a wood burn with that horrid cable mis-management, I'm printing a drag chain for that top harness. I've never had a problem with Atomstack engineering until this one major issue.
@tinkerhell I actually came up with a really quick solution. I drilled a small hole through the center of the gantry and put a tie through there to hold everything in place. It's roughly half way along the length so it leaves enough freedom for the air hose and wiring to perform full travel and no more droop.
I don't have anything that thick to try but I would guardedly say it's possible. Would have a better shot with the powered z-axis (they still haven't sent me mine @atomstack) to lower the focus each pass.
I like it! After it ruined a wood burn with that horrid cable mis-management, I'm printing a drag chain for that top harness. I've never had a problem with Atomstack engineering until this one major issue.
@tinkerhell I actually came up with a really quick solution. I drilled a small hole through the center of the gantry and put a tie through there to hold everything in place. It's roughly half way along the length so it leaves enough freedom for the air hose and wiring to perform full travel and no more droop.
Thanks for the review of the product, would you recommend it for cutting leather for thicknesses no greater than 5 mm?
I don't have anything that thick to try but I would guardedly say it's possible. Would have a better shot with the powered z-axis (they still haven't sent me mine @atomstack) to lower the focus each pass.
How much is it
Current price looks to be $489 for the 20w version. Product Page: shrsl.com/4ombi