I have the same packs and same winch good setup they are! but what i don't like about the 5000 gens ace seems like the wires at the end are ''wobbly'' i dunno if yours does that they seem to have play and not sure in the long run if it will un solder
I have been trying to find a way to use my 3 channel Traxxas radio for a winch and did not know I could change the switch itself. Thanks for this info. Can you please tell me where you got that exact 3 position switch??? It looks like it fits perfectly.
Could y'all do a video specifically on how to set up the 2-speed transmission servo and adjusting it? I have been having issues with my TF2 getting the servo to work properly with a Traxxas TQ-I controller on either of the spare channels.
so I got one of these controllers and it's driving me crazy because it came with no instructions, in an unmarked bag... what does the button do and what happens when the winch gets to the end of spooling? if you use a two way switch and for some reason dont turn it off at the end or you get a birds nest and don't switch it off right away? also the on board button looks as if it can be snapped off and remotely located ? the final question I have a whole bunch of unpopulated surface mount resistor pads on the back of mine I assume for some kind of options any idea what goes where and what they do?
the TQI can be a little difficult to set up, to shift the tf2, however it can be done. i will do a video to explain how to do it. do you have the 3 or 4 channel?
very helpful video guy!!!! i want to use this winch for my rc Absalon ( navy ship) as an anchor winch. have you guys tried to use a small chain on these winches:
how should I mount the rc4wd winch on my traxxas slash 4x4 ultimate?, I could probably figure out the wiring but I don't know what I can use for a sturdy winch mount
MRLSUFAN12 you can do wat you want, unless your vehicle is in some club class subjected to scale rules. I am a backyard basher though, many of you rule-book guys would be disgusted at what I subject my r/cs to, lol
Crazy !!! i just asked you for a video how to do this. i search "RC Winch" and BAM Heres your video !!! your awesome thanks man !!!
cool. thats a great trail finder.
Good video guys great information and very helpful. Thumbs up!
GREAT vid guys.. where do you get the gorilla string
i will do a video on the setup, its a little complex but very doable we will get through it.
I have the same packs and same winch good setup they are!
but what i don't like about the 5000 gens ace seems like the wires at the end are ''wobbly'' i dunno if yours does that they seem to have play and not sure in the long run if it will un solder
I have been trying to find a way to use my 3 channel Traxxas radio for a winch and did not know I could change the switch itself. Thanks for this info. Can you please tell me where you got that exact 3 position switch??? It looks like it fits perfectly.
google "gorilla fishing line by berkley" and you should find it, the 80lb is hard to find in the stores.
Could y'all do a video specifically on how to set up the 2-speed transmission servo and adjusting it? I have been having issues with my TF2 getting the servo to work properly with a Traxxas TQ-I controller on either of the spare channels.
very helpful you guys rock !!!!!!!
so I got one of these controllers and it's driving me crazy because it came with no instructions, in an unmarked bag...
what does the button do and what happens when the winch gets to the end of spooling?
if you use a two way switch and for some reason dont turn it off at the end or you get a birds nest and don't switch it off right away? also the on board button looks as if it can be snapped off and remotely located ?
the final question I have a whole bunch of unpopulated surface mount resistor pads on the back of mine I assume for some kind of options any idea what goes where and what they do?
how did you "Scab" the wire on the ESC tho ?
Thumbs up
the TQI can be a little difficult to set up, to shift the tf2, however it can be done. i will do a video to explain how to do it. do you have the 3 or 4 channel?
hope it helped let me know if you need anything else.
very helpful video guy!!!! i want to use this winch for my rc Absalon ( navy ship) as an anchor winch. have you guys tried to use a small chain on these winches:
I would certainly appreciate it!
nice work.
how should I mount the rc4wd winch on my traxxas slash 4x4 ultimate?, I could probably figure out the wiring but I don't know what I can use for a sturdy winch mount
How is the power of the winch when running the truck and winch off the same battery?
BEC
Helpful video
cool
i might cut it just to see the difference.
Why not cut the antenna tube down
i don't think i would try to mount a winch on a slash.
I am using the 4 channel.
I'd use fishing line. :)
MRLSUFAN12 you can do wat you want, unless your vehicle is in some club class subjected to scale rules. I am a backyard basher though, many of you rule-book guys would be disgusted at what I subject my r/cs to, lol