ไม่สามารถเล่นวิดีโอนี้
ขออภัยในความไม่สะดวก
BMW X5 Slipping Issues Fixed? ZF5HP-24 Assembly
ฝัง
- เผยแพร่เมื่อ 14 ส.ค. 2024
- BMW X5 Slipping Issues Fixed? ZF5HP-24 Assembly
In this video i attempt to put the ZF5HP-24a transmission back together after replacing the broken parts. Do note, so far i have only replaced the broken parts, not the worn parts. Rebuilding this transmission fully may be on the cards, but it will be a massive can of worms im not quite ready to open yet.
Check out our membership area for unique perks and benefits:
/ @zeroto60tube
Follow our socials for BTS stuff and more car content
On Instagram: / zeroto60tube
On Facebook: / zeroto60tube
Business Enquiries: zeroto60tube@gmail.com
I feel like you guys are an achievable level of competence but are way more brave than most of us backyard mechanics.
Its not cheap if you send this to a workshop to rebuild it so being able to DIY is massive cost saving and gain a valuable knowledge at the same time.
I think your channel is becoming one of the most comprehensive car channels on TH-cam.
Keep up the excellent content.👍👍👍
Well done. Not many people dare to touch these boxes!
Never been afraid of getting down and dirty with a box.
Clever
Top vid mate. Taking it by the horns and all that. Looking forward to seeing it back in the beast.
Right on bro! My rover lost drive in my 5hp24, dropped the pan steel chunks inside, I'm dropping the trans and checking it out
I love this channel. Content is just at the edge of what I'd be willing to have a go at myself, I learn stuff and it's confidence building to see someone question themselves as much as I do. Thanks guys!! No clue if you did that right or not, looked good though. Never seen inside an auto box that much before.
Love seeing people not afraid to tackle the unknown. I don’t know anything about transmissions either so I felt like I was learning with you lol. 😂
I love the way you do things, I recognize myself in it
I have never done a transmission however
Respect man
I hope it runs fine tomorrow
Can’t wait
watching this in socal around midnight. Fucking love this content
People can give recommendations but since you're DIYing it you can do whatever you want! Hope it all works out! Mine needs a TC rebuild due to TC slipping error throwing the check engine light.
Did replacing the TC fix the issue
Expert transmission builder 👍
Bit of a stretch..... haha
No school of youtube google internet certified transmission "specialists" raging yet, must be good
haha lol
Realised I'd missed this so went back to give it a watch, now things make a bit more sense.
Cool vid, nice to see you hitting some complex jobs head on, ballsy!
Waiting on some N54 content but stuff like this makes me appreciate all your hard word. Keep it up mate
Thanks, will do!
The play is only just out of spec and you'll get that with common wear and tear (clutches etc),
I'm no expert at all but I'd say she's in pretty good condition, nice work.
That’s what I was thinking. Fingers are tightly crossed.
Thanks for the video Kevin from the UK
Glad you enjoyed it
Rule No1 never buy vaseline with one of your mates in tow :) Owning an old bmw you always have to do financially viable repairs. Its too easy to go crazy on repairs and spend more than the car is worth. Top job. Looking forward to seeing how it works out.
Well said!
On both points.
Bmw is just an high priced car, after 10yrs. Is spending its plastics all over, they all over the junk yard, I have an x5 4.4i 2003 I spent thousands of us$ on it, the older ones were better. better
Very nice. When this will work, don't take it apart! Dutch regards, Nico.
Fingers crossed andrew, you did sound surprised it was going back together🤣👍🏴
Well i had read it was difficult to get everything back together due to the clutch plates. Maybe they werent spending the time to align them first.
well done andrew cannot wait to see it in the x5 fingers crossed it is all good then you should load the trailer on it and do a 0 to 60 that will give it a good workout
Can't wait for the first text drive!
19:47 We have studies you know.. hahahaha Great job. Now I wish I didn't turn down on a iS with a slipping auto..
hopefully everything is all going to be fine.
So damn brave!!! What you have done seems about right anyway, much more fun watching this than being responsible for the outcome 😉
Yo Ian!!! I got your number btw...... both of them. I will shoot you text right now. Cheers Andrew
Hats off to you for attempting this. Fascinating to watch you learn.
Edit: Bolt it together and send it! 😆
Edit 2: If in doubt: more Vaseline.
Thanks man, we'll see what happens.
Very interesting video, I've never watched automatic gearbox fixes. Should come in handy coz my dads auto e39 seems on the way out😂
Also what you did at 17:30 is really cool seeing the clutch packs move
bearing grease usually used as vaseline or "petrolium jelly" can cause O rings to swell. but in such a short amount of contact time you should be right with a trans fluid flush
I had no idea we were on the midst of a vaseline crisis!!
Niether did i. I went to 3 chemists, 2 super markets. Then some weird vegan health food shop/chemist..... me - "uhhhh excuse me to you sell Vaseline here" young vegan girl with strange tattoo and a nose ring - "Yes we do, but i think we are low on stock. we only have 3 small tubs." "ill take the lot, and no its not for what you think."
Or maybe it is.....
I did not expect to watch a grown man smear vaseline on his shaft, when I woke up this morning!
Bahaha. Lol.
@@ZeroTo60Tube Vaseline jizz
"Looks like lube doesn't it?"
7:52
Ooo yeah. An extra long episode to watch with dinner!
Hope it wasnt too boring.
@@ZeroTo60Tube Not at all. Quite fascinating to see the inner workings of a transmission.
Can’t wait to see how it does on the X5 🤞
Me too!
I guess you could use the deep gauge on a vernier caliber to see if the clutch packs are seated fully
So I've had an extremely shitty day. Now in bed trying to get my head out of that mindset and into something I like, and I come to watch this.. Right after single turbo n54 pull videos. Just sayin. Good job boys.
Thanks so much for your help on the M5 we had a late night but she’s sounding a lot better!
Hi! I have an e38 730d from 2001, and i have a problem where when the transmission and engine heat up, 1st, 2nd, and 3rd gear slip, and the car enters into "gearbox emergency program" where it only works on 5th gear. I removed the transmission's sump and found a lot of debris on the magnets (i assume from the clutch packs). I think the fault may be on the clutch packs having a lot of wear. Where did you guys found the A drum? Can you send me a link? Thanks in advance. Your video is really helpful
Great vid guys , what is the trans fluid you used ?
Good luck!
Excellent video, keep it up
Thanks man. Might need some luck on this one haha. We’ll see how it goes.
Hi sorry i just starting to tear down my 3.0 D transmission, never done before HAHA just wondering where did you get the new parts from? Thanks ...
Take it to a transmission service place that has a transmission Dyno so you don’t have to put in back in and find it’s doesn’t work. Just a thought
I wish i found your Channel when i was rebuilding my x5 tranny.. Same here i learn from watching TH-cam for this x5..maybe you might be able to guide me or any advice. I rebuilt mine about 4 years ago..last week im getting a code for torque converter too much slipping..i look at the lived data for input and output speed sensor at tranny reading good no issue..should i replace converter or you think its more than that..
Its quite hard to give a definitive answer with out seeing and feeling the car in person, mind you even then it can be a bit of a guessing game. The torque converters are relatively easy to swap and they do play up. So might be worth starting there if you have a hunch thats the problem.
Great work!
Thank you! Cheers!
I always doubt my self when it falls in first time I also get disappointed when my my housing doesn't bottom out too tbh 😒
Where do you get the parts supplied from for the transmission
I ordered them direct from ZF australia.
Gday mate. Just bought a E53 3.0 diesel and is shifting down into first with a big clunk. Then took it for a hilly drive and downshifts when it shouldn’t and then goes into trans error program etc.
Just had the trans serviced on buying it... bloody frustrating. Thoughts?
if its recently been serviced the oil level could be wrong? They do all sorts of horrible things when low on fluid
Stick to your guns. Fix the obvious stuff first, proves it works then decide the rest. The HAPP makes everything easy as you can always pull it out again😁
Don’t rebuild the gearbox if the issue is fixed after the reinstall . It should last like that for another 150000kms imo, don’t strip what is not broken ;)
haha. you sound like a car salesman... haha. Im expecting other issues to be honest. Whether is slow shifts or slipping under load. But we wont know until we can test it in the car again.
@@ZeroTo60Tube haha yeah true, the shafts, clutches and gears all seem to be very tight still . Those are great quality gearboxes but it would be great to rebuild it for TH-cam views etc I guess ;)
Possible with 8hp70 with pmc adapter kit?
i have no idea
I wonder if a normal 5HP-24a from a 4.4 X5 would work with the 4.6is computer. Might be a way to cheap out again. Also, some of the M57 models had more torque than the petrol V8s in this era but I'm unsure of interchangeability.
I’d been keen to know this as well.
It will bolt up and work but the trans, valve body and TC are slightly different and less of a performance trans like the proper 4.6 one.
gotta love how a $5 o ring can cause so much trouble... and a professional mechanic would definitely insist on a full service for mega money hah... perks of having the balls to have a go yourself and save $2000+ .... assuming it works and doesnt explode when you put it back on the car haha!
Fingers and toes crossed.
Wtf are y’all Ozzies doing to have a gasoline shortage?! And before anyone says you can’t use it wrong. It’s PETROLEUM. Just waxy left over from dewaxing
i think it will run 100% and you'll never take it back out 👍
So is it the same box in the 540i ? Same code..
Basically the same. But there are 27 versions of the 5hp24. Small differences in clutches, torque converters and programming, from what I have read. As well as different cases.
Nice bit of ear wax as well as the vaseline at 7:54. Wishing you luck dude.
Where did you find the parts?
Actually ordered them through a transmission shop in South Australia. They were sent straight to me from ZF in Sydney.
What fluid did you use in the end? The ZF stuff is hard to come by in Australia and it is about $700 also I phoned bmw to acquire the OE filter and none in Aus at the moment. 3 week wait and it’s $700 for the gasket, filter and sump bolt 😳
I used Pentries recommended fluid and an aftermarket filter. Trans has done nearly 25,000ks since this video and a lot of a towing. I have the filters in stock ready to post if you would like to order one. zeroto60.com/product-category/products/e53-x-series/
@@ZeroTo60Tube I got it all back together using Penrite and aftermarket filter. It was fine on first drive, second drive it was holding third or fourth depending on its mood in full auto but would run fine in manual with super smooth shifts. I reset all adaptions and got the car feeling good. Took it for a long run and then home again no problems. Checked fluids ant topped off a bit more. Day three I drove an hour and a half to Byron bay and the trans shat itself leaving me, the mrs and our baby stranded in the pissing rain. $500 on a tow truck to get it home and $380 on a cab. Can’t say I’m best amused but hey, it’s 1am and I’m home at least. 🤦♂️
@@marchdeane4896 Ohhh man sorry to hear about the break down. Hmm any idea why it was holding shifts? Curious to know. Also curious to know why it died too. Please let me know when you work it out.
@@ZeroTo60Tube I really wish I could put my zf6hp19 from my wrecked E65 in there. That things in great shape. I have the tow truck arriving at 11am this morning. I will try pulling some codes. At this point it won’t engage reverse or anything. Super upset.
@@ZeroTo60Tube do you have a way to contact privately?
I have an x5 4.6is that the engine blew up on, beyond the worthness of reparing. Here in sweden there are 0 engine available. Anyone know where i could look for one in this world perhaps haha?
Anyone over Europe way with a hook up?
try here www.schmiedmann.com/
🤞🤞👍👍👍
BMWs should have Vaseline and crazy glue as standard tools in the trunk.
I wish I was your neighbor