THANK YOU! THANK YOU! THANK YOU!. My son hit a curb and blew out his front right tire. After replacing the tire, the Traction Control Light remained on. No fault codes hit the car's computer. This hack fixed my problem.
i went to get wheel alignment done yeseterday and vsc light still showing solid light. followed your step and it worked. omg i cant describe how happy i am ty
This worked on my 2012 Camry XLE Hybrid that had the traction control light on solid after towing the car with the engine running (battery was dead). Then replaced the battery and the light was still on. Used the same pin out on the OBD, pressed the button to on twice (without my foot on the brake), then pressed the brake 8 times. The lights started flashing, and kept flashing for like 30 seconds and didn't stop. Then I turned off the ignition, removed the wire, and started it. Viola! The light is off!! THANK YOU
No way bro!!! What a head ache i got tryin to turn that damn light off. And finally i got it off with out spending monet at all. It worked on mu corolla 2016 1.8 manual. Thanks bro!
It works!! I tried it on my 2011. After pumping the brakes 8 times I waited a few seconds, took the wire out and took the key out , finally put the key back in and turned on the car. Thank you, Stefen!!
@@hopeekechukwu7019 try replacing the gas cap completely too. Those gas caps have like springs inside them and you’re only suppose to turn click them at least one turn click. That’s what I did with mine I got a brand new gas cap and did the pin method and it worked for me.
@@asilaydying672 Actually the problem with my Toyota Corolla 2012 was a bad fuel pump. Once I replaced it, the check engine/track off stopped displaying.
@@hopeekechukwu7019 yeah usually when you drive around with low fuel levels that’s what happens with bad fuel pumps because your gas you put in still is dirty regardless so your pump gets the dirty stuff if you drive around with a bad fuel pump. So always keep your gas full and you should try a product called BG 4K for your fuel system. It’s pricey but good stuff. And use BG MOA with your oil. Highly recommend. Just optional stuff though sir. Have a good day sir
Appreciate the video, worked on my 2011 Tundra. I replaced the rack and pinion and this traction light came on, after a few hours of research I found your video.
My 2014 corolla abs and traction light are both on together. This happened a couple years ago, but I don't remember what I did to turn it off. Fluid is up and battery disconnect didn't solve it.
I did a old trick and turn the switch until the lights come on but DONT turn the car on. Then pump the gas pedal 3 times and wait a couple of seconds then turn the car on and that should work it did for me. This removes the abs and brake light...
2016 corolla s 1.8l. Changed cv axel and tie rods inner and outer. I adjusted alignment up wrong on driver side tie rod and threw traction light. Got alignment done and this reset my light.
Does work for Peugeot 107/C1/Aygo. Light goes off after tapping multiple times the brake but comes back in a few seconds . After the lights comes back it flashes 3 times, stops and flashes another 3 times and so on. At this point tap 3 times your brake fast. My ABS light is gone now
Just follow everything. And don’t turn the car on completely. Do everything and when the lights start flashing it should go off on it’s on. And when that happens you can safely turn the car off and remove the metal pin. Make sure they’re on the right ones or you’ll end up shortening something out. Good luck👍
Will the traction control system still work after this? I mean if you push the traction control button will it activate or deactivate it and the indicator light still appear on and off in the dash?
I have a prius 2012 and it has hard stearing but no errors or lights and it feels bad driving, also it forces to go left even i have done alignment, should i do this method?
So this worked for me like 8 months ago and everything went away then came back like a month later. Revisited the video and now it’s not working for me any idea why ?
Maybe try changing out your speed sensor? You’ll have to take the wheel off it’s a simple fix. And you can try it again. First of all what lights came on?
Did you try pressing hard on your brake pedal. Pressing hard on the brake pedal will make the traction light turn on. You just press firm all the way and hold…and to turn it on repeat the same press down firmly on break pedal and hold. There’s no need to pump the pedal. I discovered this because I like to push buttons to see what happens …🤓
I followed this video and it worked my CG is 4 and the TC is 13. However lights disappeared but once I went to test drive it the check engine light and traction light came back on. I desperately need help. I replaced my speed sensor and my brake light switch. I'm defeated. Any guidance would be greatly appreciated. Thank you
@@adrew1963 I was able to fix it, I replaced my speed sensor and brake light switch. However that was not the problem. The wires from the speed sensor were chewed by a squirrel or rat. They chewed 4 inches of wire. Once we replaced the wires and reset codes the lights went off and car shifts in gear. No issues,
@@adrew1963 Yes check engine light and traction light. But it's the wires coming from the speed sensor itself. So you need to trace it from the speed sensor on the transmission and up.
Hi bro, you are reading your dlc wrong way, In your car the upper left most pin is number 1, the last one is number 8. the lower left pin is number 9 and the last lower right most is the pin number 16. Thanks.
No. But you should hear like metal to metal grinding or before that gets worst a little screech. Just look at your brake pads and see or have someone do it for you. Shops are a lot though.
actually it worked but as soon as I drove off, the lights came back on so not sure what’s wrong with it. Imma try new speed sensors then I’ll update my comments
Hi bro, you are reading your dlc wrong way, In your car the upper left most pin is number 1, the last one is number 8. the lower left pin is number 9 and the last lower right most is the pin number 16. Thanks.
THANK YOU! THANK YOU! THANK YOU!. My son hit a curb and blew out his front right tire. After replacing the tire, the Traction Control Light remained on. No fault codes hit the car's computer. This hack fixed my problem.
i went to get wheel alignment done yeseterday and vsc light still showing solid light. followed your step and it worked. omg i cant describe how happy i am
ty
Oh my god that is why mine is on too!!! I had an alignment and it went on right after they gave me the car back. and the scanner gives no codes.
@@stephanielivingston8022 it was easy fix. this video helps and works like a boss
This worked on my 2012 Camry XLE Hybrid that had the traction control light on solid after towing the car with the engine running (battery was dead). Then replaced the battery and the light was still on. Used the same pin out on the OBD, pressed the button to on twice (without my foot on the brake), then pressed the brake 8 times. The lights started flashing, and kept flashing for like 30 seconds and didn't stop. Then I turned off the ignition, removed the wire, and started it. Viola! The light is off!! THANK YOU
Will the traction control system still work after this? I mean if you push the traction control button will it activate or deactivate it?
No way bro!!! What a head ache i got tryin to turn that damn light off. And finally i got it off with out spending monet at all. It worked on mu corolla 2016 1.8 manual. Thanks bro!
Your video helped me fix the handbrake and abs warning lights. Thank you so much for making this video ❤
I have ABS and handbrake light on too. I'm gonna do it.
It works!! I tried it on my 2011. After pumping the brakes 8 times I waited a few seconds, took the wire out and took the key out , finally put the key back in and turned on the car. Thank you, Stefen!!
Glad to have helped you sir! Take care👍
Didn't work on my 2012 model. Cleaned my gas cap and did this but nothing worked so far. In fact, after my cruise control stopped working as well.
@@hopeekechukwu7019 try replacing the gas cap completely too. Those gas caps have like springs inside them and you’re only suppose to turn click them at least one turn click. That’s what I did with mine I got a brand new gas cap and did the pin method and it worked for me.
@@asilaydying672 Actually the problem with my Toyota Corolla 2012 was a bad fuel pump. Once I replaced it, the check engine/track off stopped displaying.
@@hopeekechukwu7019 yeah usually when you drive around with low fuel levels that’s what happens with bad fuel pumps because your gas you put in still is dirty regardless so your pump gets the dirty stuff if you drive around with a bad fuel pump. So always keep your gas full and you should try a product called BG 4K for your fuel system. It’s pricey but good stuff. And use BG MOA with your oil. Highly recommend. Just optional stuff though sir. Have a good day sir
Appreciate the video, worked on my 2011 Tundra. I replaced the rack and pinion and this traction light came on, after a few hours of research I found your video.
Glad to have helped. Have a good day and be safe
This worked on my 2016 rav 4
Thank you
Thank for posting. I try today and help reset the light my corolla 2016. Give less worry for today my problem.. God Blessed you.
Worked on my wife 2014 Toyota Corolla thank you so much
Nice. Glad to have been some assistance 👍
My 2014 corolla abs and traction light are both on together. This happened a couple years ago, but I don't remember what I did to turn it off. Fluid is up and battery disconnect didn't solve it.
It's work for me. Coralla 2015. Thank you.
How were you able to pump the brakes , when it's gonna be stiff when the engine is turned off
I did a old trick and turn the switch until the lights come on but DONT turn the car on. Then pump the gas pedal 3 times and wait a couple of seconds then turn the car on and that should work it did for me. This removes the abs and brake light...
Dude 7 was never suppose to start the car up like that crazy ..but it worked..pretty good
Worked like a charm Thank you!
I will try today bro thanks
Wow i love it, it worked on my corolla 2010, thnx bro
Hi, i need to do it now, should I start the enginge with the small cable conected too.?
2016 corolla s 1.8l. Changed cv axel and tie rods inner and outer. I adjusted alignment up wrong on driver side tie rod and threw traction light. Got alignment done and this reset my light.
Thank you, worked on auris 2012-2012 E150
Great man . my car have same problem. I will do it tomorrow
Fixed my 2007 Lexus is250 🙏🏽
Does work for Peugeot 107/C1/Aygo. Light goes off after tapping multiple times the brake but comes back in a few seconds . After the lights comes back it flashes 3 times, stops and flashes another 3 times and so on. At this point tap 3 times your brake fast. My ABS light is gone now
Thank you! Worked on my 2015 camry
Hi.Can i try for chr 2016 1.2t? . is it run?. Thank you for video
Thank you so much sir good job 👍
My brother, please, the link that you did in the fish of the test, when is it removed, how to adjust the programming, please reply
Just follow everything. And don’t turn the car on completely. Do everything and when the lights start flashing it should go off on it’s on. And when that happens you can safely turn the car off and remove the metal pin. Make sure they’re on the right ones or you’ll end up shortening something out. Good luck👍
Will it work on 2007 4runner my anti skid light doesn't work when tires make slip in mud or in snow it doesnt blink. I dont know why it stop working
Oh shit that worked in my 2013 Corolla! Thanks bro
Thank you i fixed my car
3:10 “…holy shit it worked!”
Will the traction control system still work after this? I mean if you push the traction control button will it activate or deactivate it and the indicator light still appear on and off in the dash?
Very good master
Thank you so much . Mega million 🙏
Hi. Please I want to know if the light still off after 2 years ago? 😅
Do you know any trick to make the cruise control works as I have tried every possible thing, changed the cruise control and fuse is fine. thanks
Did you fixed?
Whenever I do that cruise control light shows up
Does this procedure applied to my 2010 Corolla,too? Because I have a VSC and Trac off lights on
Try it. Should work fine.
@@asilaydying672 thank you
Was rpm and speedometer off too? I’m having the same problem.
Will this work on a 2008 avalon?
Yes, disconnecting the battery did not work. Will try this on my Toyota Rav4
Did it work?
Did it work I have this on my rav4 to
Thanks big big help
Work on my celica t23, TY
I have a prius 2012 and it has hard stearing but no errors or lights and it feels bad driving, also it forces to go left even i have done alignment, should i do this method?
Check steering pump and fluid
Just get a 20dollar code reader plug in and reset codes😊
So this worked for me like 8 months ago and everything went away then came back like a month later. Revisited the video and now it’s not working for me any idea why ?
Will it work on a 09 impala?
اخي انا نظفت حساس الصالنصة وظهر عندي علامة المحرك ومانع انزلاق ذهب للبرمجة يظهر عطل بلحساس معلم كان جيدا ما العمل رجاء
وصلت نتيجة لو لا ؟
I can’t believe this worked
I try with 2009 Corolla CE it didn’t work for me can you help?
What happens when you slam on the brakes.
Wow it worked thank you
I’ll do that to mine today, lyk 😂.
Do you have to keep the wire on the obd?
Yes. Keep the wire on there.
@@asilaydying672 How long do we keep the wire
@@ahmedyamen6696 hello
After reset. Does the ABS light comes back after driving excess amount of miles. ?
Bro I have same issues on Toyota Prius.what can I do
SOS un crack😻💯😫
My problem was just Wheel angle sensor. go and change it
This did not fix my problem and light is still on. So is it my speed sensor or steering angle sensor that's faulty?
Maybe try changing out your speed sensor? You’ll have to take the wheel off it’s a simple fix. And you can try it again. First of all what lights came on?
@@asilaydying672 It was just slip indicator light, replacing steering angle sensor fixed it.
Do you have to take off the pin before you switch on your engine after the initial blinks
No just start it up and it should go away and finally take off the pin.
Why did your headlights start strobing?
Just how it looks on video. Those are the DRLs
In toyota vios 2010, what pin?
Did you try pressing hard on your brake pedal. Pressing hard on the brake pedal will make the traction light turn on. You just press firm all the way and hold…and to turn it on repeat the same press down firmly on break pedal and hold.
There’s no need to pump the pedal. I discovered this because I like to push buttons to see what happens …🤓
I’ve done this to my 2010 Prius
and recently to my Venza.
Are you saying that pressing and holding the brake pedal will turn off that traction control light with or without that jumper wire?
@@MrBritrider you need nothing else just press firmly all the way down on the brake pedal.
Wouwww it works on my 13 corolla thanks alexhoney
@@oscarvicpe7650 😉
I just realized mi toyota corolma 2005 does not have my ABS relays i the fuse box, will it be a problem??
Worked... Thanks
Does this work for a 2011 scion tc? "Help"
It should work. Try it out. Just remember the steps
@@asilaydying672 will do, thanks 👍🏼
What does the light mean
A mi me funciono en un toyota corolla 2010 LE
hola amigo, estoy por probar este truco para mi corolla 2011, sabes que estamos haciendo en realidad ? no estamos quemando nd ?
Can anybody tell me if this will work on my 2017 hyundai sante fe sport???
I followed this video and it worked my CG is 4 and the TC is 13. However lights disappeared but once I went to test drive it the check engine light and traction light came back on. I desperately need help. I replaced my speed sensor and my brake light switch. I'm defeated. Any guidance would be greatly appreciated. Thank you
sister has same issue with her corola did you find anything out
@@adrew1963 I was able to fix it, I replaced my speed sensor and brake light switch. However that was not the problem. The wires from the speed sensor were chewed by a squirrel or rat. They chewed 4 inches of wire. Once we replaced the wires and reset codes the lights went off and car shifts in gear. No issues,
@@angelawise7240 did you also have the check engine light on to because I tried wire 4 and 13 but came right back immediately so still working on it
@@adrew1963 Yes check engine light and traction light. But it's the wires coming from the speed sensor itself. So you need to trace it from the speed sensor on the transmission and up.
@@adrew1963 I can take a picture for you and that might help you.
Works perfect :)
Hi bro, you are reading your dlc wrong way, In your car the upper left most pin is number 1, the last one is number 8. the lower left pin is number 9 and the last lower right most is the pin number 16. Thanks.
Thanks Stefen.
Good
So the light on the dash is off but now the headlights are in strobe mode? Awesome.
Damnnnnn 😂😂😂😂
Camera does that.
How mazda reset
عملت نفس الطريقه على تويوتا يارس 2014 ولم تنجح
What kind of wire did you use?
I'm not sure it was just a basic wire man. Nothing fancy. As long as it can stay into those little holes it'll be fine.
You did not show or mention when to pull off the wire.
En un nissan como puedo hacer eso ????
If it needs brakes will the light come on
No. But you should hear like metal to metal grinding or before that gets worst a little screech. Just look at your brake pads and see or have someone do it for you. Shops are a lot though.
How to program toyota corolla2005
How?
I tried this but didn't work for me
What does that light even mean
Plz help
Ima try on my 2016 right now lol got into a hit and run also :(
Hope it at least helped you out man👍
Its F-ing bitch when this happens
I did the same thing it didn't work bro
it didn't work on Corolla 2010 le
❤❤❤❤😂🎉🎉🎉
Did that shit really work?
Yesssir. I disabled mine. It's a simple step check it out
Yes it did for my Lexus too
Saved me a trip to dealership and around $100
actually it worked but as soon as I drove off, the lights came back on so not sure what’s wrong with it. Imma try new speed sensors then I’ll update my comments
@@hectorrogel I bet it's your sensors man. Update me once you get it done.
That's 4 and 12 lmao
اربي
Donde gbfg
Watsapp number
This is irresponsible
L0p8l0
Hi bro, you are reading your dlc wrong way, In your car the upper left most pin is number 1, the last one is number 8. the lower left pin is number 9 and the last lower right most is the pin number 16. Thanks.
Does this work with a 14 Rav4?
اربي