Thank you for sharing this info. I had the similar problem on my 2011 Toyota sienna after replacing a steering rack. I went twice to mechanic to reset the zero point calibration and when I just drove away from the shop the lights on my dash came back. Today, after watching your video I did the same on my sienna and it worked. Thanks a lot one more time.
So thankful for this video! Worked great on my 2009 RAV4. I replaced my intermediate steering shaft and was a little careless with the wheel position. I got it dialed in driving straight but once I hit 15mph the car would throw on the traction control and try to stop the car lol. Not just the light but literally try to stop it too. I assume I messed up the wheel angle and it thinks I’m trying to turn while going straight. Learned about the steering angle sensor, found this video and boom it fixed it. Thanks for the video!!
Thank you very much ! It worked on my 2003 Lexus RX 300. The VSC light came on just by itself. Without this clip, I would have brought it to the dealership and they have to charge a minimum of $269 to reset it!
Thank you it worked on my 2007 4runner. I tried multiple fixes posted by others in youtube, and I appreciate everyone of them, but only yours worked. thanks
definitely worth the $10 tip I was going to give the alignment tech IF he took the 1 minute to do this. Send me your venmo It will be on the way. THANKS!
Worked perfectly on my 2011 Lexus RX350. The light had come on after doing an alignment and really did not feel like driving back to the shop. For anyone trying this on a RX, count the pins starting from the engine towards the drivers seat. Also first short the pins 4 times while on IGNITION ON, turn everything off, and the proceed as in the video.
Its says check power steering on my dash, the resoivoir sas low, i added power steering fluid but the steering is still heavy, ive disconnected battery and it still wont work, any ideas?
I just replaced the clock spring in my 2015 Tacoma. I accidentally twisted the steering angle sensor and did my best to return it to the original position but now my slip indicator light is on solid. I tried another guide on tacomaworld to do this, but that one indicated using the 4th pins from the right. Any harm in trying this? Will this fix the issue?
No harm, I’ve put it in 4th pin on accident before and nothing happened. To confirm that the reset is taking place all the lights have to be flashing. Hope this helps
will it work in 1gdftv hilux, fortuner or innova, skid light on dash appears have it check but the shop suggested for steering angle replacement, this appears after front wheel alignment
Hello, you can take a look at this video, I used the comprehensive diagnostic equipment to do this function for VW: th-cam.com/video/YUygYECFsmE/w-d-xo.html .
Hello, you can take a look at this video, I used the comprehensive diagnostic equipment to do this function for Kia cars: th-cam.com/video/bsAyzSyaEPc/w-d-xo.html.
Is it 5 from the passenger side or driver side? This is for a 2016 Toyota Corolla. On yours, the wide part of the trapezoid (obd) is towards the engine and on the Corolla, it’s closer to the driver. Does this make a difference??
Yes it makes a difference. You may blow a fuse if not done correctly. Just pause the video to about 1:58 and match your port to mines. Some ports are upside down/ right side up. Hope this helps.
@@JaiPrakash-bd2xt I don’t think so, they would just give you warning lights sounds like a mechanic issue. Something is broken internally or bent. You need to lift the car up and have some turn the wheels while you look to see if anything is rubbing.
@@Mr_Fix_It my vehicle is in an accident and have not been able to get power steering to work has an electric rack and pinion and a friend of mine has a scanner but we can never get it back to zero point
@@MiguelGarcia-jl3bu You have an issue you need to fix before you can do a reset. Your rack n pinion is electric so check your battery voltage and your fuses and relays. Unless the car has been in a accident then it could have internal damage and may need to be replaced.
@@Mr_Fix_It I appreciate you replying back to me and yes, I have replace the rack and pinion it was used but off of a running vehicle and picking up another rack today and the yaw rate sensor. Someone told me that has something to do with the suspension and alignment components for the vehicle. It was in an accident, I replaced everything as far as suspension
Hello, you can take a look at this video, I used the comprehensive diagnostic equipment to do this function for VW: th-cam.com/video/YUygYECFsmE/w-d-xo.html .
@@izzogenious you have a bad sensor my friend you need to replace it. You need to fix your problem first. My procedure is for resetting after fixing the problem.
The shop should have done this! Send them a bill. Another reason to go to the dealer. OVD-II pins 4,5 are grounds, 16 is B+, pin 1 is UART, pin 2 is class-2 serial data, GM used pins 12 & 16 but these are open to manufacturers. Check with the dealer as if you set more codes or burn a module or computer who pays? DK ASE master tech since 78 ACDelco instructor UTI instructor, retired!
What does shorting out both pins do? VSC light is not on. Anti-skid light is flashing and beeping when I turn my steering wheel on highway. Does this calibration fix this problem?
Shorting both the pins is pretty much reseting the whole system. You may have a alignment issue or a bent suspension part. I would address the issue and get the alignment first then do the reset.
@@Mr_Fix_It Do you mean that 'shorting these pins' is the same as clearing ALL codes with an OBD2 tool/reader? And, if jumping these pins ONLY clears codes - why is this also called a 'CALIBRATION'? I have 3 warnings showing in my instrument cluster (on my 2008 RX350): - ABS, - VSC OFF(flashing), and, - traction control symbol (car with swervy lines behind it). They just all came on after a gas fill up, I think! I also have several codes including: - U0073 (ABS bus communication off), - C0205 (front speed sensor LH circuit), and - U0126 (lost communication with steering angle module). I cleaned the front left ABS speed sensor - it did have some metal clinging to it. So, now I'm wondering what to do next. I drove the car for 10 minutes - ABS light stays on. Should I use your jump the pins to re calibrate steering angle? (which may reset ALL codes?) And then should I clear all the codes with the OBD2 scanner? I also have these codes. Might they all be coming due to ABS error code?: U0123, C1223, U0124 (replace YAW rate sensor) C2122 What do you suggest I work on next? (THANKS for any help you would offer!)
@@m.n.3490 Sounds like you have a bad ABS/wheel sensor. I would replace it and clear all codes with a scanner. You can get a speed sensor on Rockauto.com. They probably have the best pricing on auto parts .
@@Mr_Fix_It (I thought I replied, looks like I did not ...) So,I did look at the sensor, and there was a lot of metal shavings sticking to it. I cleaned it off, thinking the metal shavings was messing up the sensor readings. The sensor line looked good, not cuts or scrapes. I dd not test the sensor line for resistance as I could not find my meter. What I am not clear on. is, if cleaning the sensor worked, would the ABS light go off after driving the car for a few miles all by itself? Or, would I need to clear the ABS light, drive a few miles, and see if the ABS warning light comes back on? Since I have so many codes, I'm not sure if they are related to each other in any way. Ex: Like with the BS code of U0073 (control module communic BUS off) and C0205 (Front speed sensor LH circuit). Would cleaning the sensor (or replacing with a new sensor) turn off both U0073 and C0205? Do both need to turn off to clear the ABS light being on? And do any of the other warning lights relate to ABS? For example do the VSC OFF, or TRAC (swerving car symbol) light up due to ABS light? DO they have their related codes? Man, this is complicated stuff.
So, I saw another video on recalibrating the steering angle, but, it looks like they used different pins, since the DLC3 is oriented 180 degrees differently than yours. You seem to be using different pins? In YOUR video the pins used look like: // o o o X o o o o \\. // o o o X o o o o \\ In OTHER video pins used look like: \\ o o o o X o o o //. \\ o o o o X o o o // The other video said to use pins 4 and 12 (where 4 = TS, and 12 = CG) I have a diagram on my google photos, but, when I tried to post a link here, TH-cam deleted my comment. Anyways, which instruction should I use? Are you sure you put the paper clip in the correct pins in your DLC3 (OBD2) port?
The OBD port is in different positions in different cars. As long as your car is a Toyota or Lexus or Scion, line up your paper clip like in my video and you should be able to do the reset.
Thanks for your reply. Ooops, I messed up the diagram above. (Was getting sleepy, lol). Anyways, what I meant to say was that in the other video, as well as another forum, they said to use pins 4 and 12 (where 4 = CG, Chasis Ground, and 12 = TS, Brake Actuator Assy). 16 13 9 ============ In YOUR video the pins used look like: // o o o X o o o o \\. // o o o X o o o o \\ =================== 8 7 6 5 4 3 2 1 (which is pins 5 & 13 where 5 = SGND, and 13 = TC) 16 12 9 ============ In OTHER video the pins used look like: // o o o o X o o o \\. // o o o o X o o o \\ =================== 8 7 6 5 4 3 2 1 (which is pins 4 and 12 (4 = TS, and 12 = CG,)
Hello, you can take a look at this video, I used the comprehensive diagnostic equipment to do this function for Kia cars: th-cam.com/video/bsAyzSyaEPc/w-d-xo.html.
That message something is still wrong. Put a OBD scanner on and see if there are any codes. Maybe a bad ABS/speed sensor. Also just be your alignment is still off. Hope this helps.
Maybe I’m the only one who can’t get passed the stupid bell chiming but seriously people how can you make a video and expect people to sit and listen when you have the door open chime going off the entire time???
Yes actually the door needs to be open for me to access the OBD port and the ignition on for the reset. I’m glad you can find something negative from something that is useful and free for some people.
@@Mr_Fix_It If you're going to publically put yourself and your videos out on the largest video platform that exists on planet Earth, don't get your feelings hurt when someone addresses a legitimate issue they may have with the "quality" of one of those videos. I lost around 75% of my hearing in BOTH of my ears from a horrific accident in 2018 and have to wear hearing amplifiers and the sound coming from the chime in your video makes both of those amplifiers hit a high pitch and then the sound cracks. Have you ever heard the sound a microphone makes when it gets too close to the speaker that it's connected to? That's the same sound I get to hear when watching this video. This video was neither useful nor free for me. Also, if you would've turned the key to the "on" position instead of having it on "accessory," you'd noticed that the chime would've gone away.
@@dennishickmaniii3672 If you can't hear this sound, how would you do it live? This sound is in the van, do you have one? There's no need to behave like that when he's helping. There are much worse sounds on this platform. Regards.
Mitsubishi Lancer is also possible? There are three error codes: C1290, C1219, and C2205, but the code cannot be deleted even with a scanner, and the alarm continues to ring even when driving.
hi，on my corolla the vsc didnt blink but the anti-ski logo is blinking and beeping while i turning the steering wheel，the light not always came out but only sometime. can this method done on my corolla？
Thank you for sharing this info. I had the similar problem on my 2011 Toyota sienna after replacing a steering rack. I went twice to mechanic to reset the zero point calibration and when I just drove away from the shop the lights on my dash came back. Today, after watching your video I did the same on my sienna and it worked. Thanks a lot one more time.
@@sergeyskumatov5570 awesome!
So thankful for this video! Worked great on my 2009 RAV4. I replaced my intermediate steering shaft and was a little careless with the wheel position. I got it dialed in driving straight but once I hit 15mph the car would throw on the traction control and try to stop the car lol. Not just the light but literally try to stop it too. I assume I messed up the wheel angle and it thinks I’m trying to turn while going straight. Learned about the steering angle sensor, found this video and boom it fixed it. Thanks for the video!!
Happy to have helped!
Dude my highlander did this too! I was like what the heck! I didn't even mess with the brake system. Going to try this fix right now
Is it work with Toyota hilux pickup
@@abbasmuhsen2715 yes
Thank you very much ! It worked on my 2003 Lexus RX 300. The VSC light came on just by itself. Without this clip, I would have brought it to the dealership and they have to charge a minimum of $269 to reset it!
Hello, here, just to let you know that you can also do this function with a comprehensive diagnostic device: th-cam.com/video/bsAyzSyaEPc/w-d-xo.html.
I have Toyota Rav4 2017 with this exact issue. I did what you did and you saved me about 200 dolars. Thank you so much man.
Awesome! I love it!!
Worked on my sons 2003 Toyota Highlander BUT used pins 4 and 14. The obd2 plug was oriented the same as yours. VSC LIGHT IS NOW OFF. THANK YOU.
Thank you it worked on my 2007 4runner. I tried multiple fixes posted by others in youtube, and I appreciate everyone of them, but only yours worked. thanks
I have 2007 4runner too the slip blinker doesnt blink. Will this will work
definitely worth the $10 tip I was going to give the alignment tech IF he took the 1 minute to do this. Send me your venmo It will be on the way. THANKS!
@Type-Ry
sent. thanks again!@@Mr_Fix_It
a good alignment tech would have done this as part of the job
When the rain stops I am going to give this a shot. My light came on after a Lift Kit was installed. So hoping this is it 👍🏻
bummer didn't work
me funciono a la perfeccion en una hilux, muchas gracias por tu aporte, saludos desde argentina!!!
Worked perfectly on my 2011 Lexus RX350. The light had come on after doing an alignment and really did not feel like driving back to the shop.
For anyone trying this on a RX, count the pins starting from the engine towards the drivers seat. Also first short the pins 4 times while on IGNITION ON, turn everything off, and the proceed as in the video.
Its says check power steering on my dash, the resoivoir sas low, i added power steering fluid but the steering is still heavy, ive disconnected battery and it still wont work, any ideas?
Just had the same problem with mine took it back to the alignment shop they put the scan tool on it and recenter my steering angle finder all is good
Hello, you can take a look at this function I made with the comprehensive diagnostic equipment: th-cam.com/video/bsAyzSyaEPc/w-d-xo.html.
Is there any disadvantage when this paper pin is connected to another hole?
Will it damage anything in the car?
Thanks for the video
Will this work on 2017 camry? I have been seeing videos talking about finding TG and CG on the obd but nothing helpful
Yes it should work
My Lexus ISF is doing this after alignment … do you think this trick will work on it? I have no traction control and the weather is getting bad lol
Yes it should work. As long as you cross the correct pins it will reset your system.
Did you try this? My rc F has the same. I wonder if the pins are the same corresponding from this to the lexus rc f
@@spikey9azn6 haven’t tried it yet, weather has been really good where I live so I haven’t felt the need
@@spikey9azn6 I tried and it works on my SC430 but for some reason it comes back fast
Is this applicable to my toyota vios 2019 model?after i replace my rack and pinion assembly traction control light indicator shows.
Yes
Any updates?
Thank bro god bless you
Omg it works on my eps. Problem
I just replaced the clock spring in my 2015 Tacoma. I accidentally twisted the steering angle sensor and did my best to return it to the original position but now my slip indicator light is on solid. I tried another guide on tacomaworld to do this, but that one indicated using the 4th pins from the right. Any harm in trying this? Will this fix the issue?
No harm, I’ve put it in 4th pin on accident before and nothing happened. To confirm that the reset is taking place all the lights have to be flashing. Hope this helps
Will this work for code c1336 and c1203?
Its all car universal formula or only in Toyota?
This happened after an alignment on a 2013 RAV4 will it work? I might as well try it.
Yes it will work. You can thank me later. 🤣
Can you do this procedure with a 2008 Buick lucerne, 3.8 engine?
2007 4runner v6 my anti skid lighting isnt flashing anymore.
Whould this method fix the problem??
will it work in 1gdftv hilux, fortuner or innova, skid light on dash appears have it check but the shop suggested for steering angle replacement, this appears after front wheel alignment
Sorry we don’t have those cars here in the US but the Hilux should work. The other two I am not sure.
All car same?
What pins are strapped for the right hand drive models please?
I’m not sure. Just pause the video or screenshot it and match it up to your OBD port. Hope that helps.
Would this work for a 2015 Toyota 4Runner SR5 model?
Yes it should work.
If zero is not done will atrac, mts n cc still work?
Hello, you can take a look at this video, I used the comprehensive diagnostic equipment to do this function for VW: th-cam.com/video/YUygYECFsmE/w-d-xo.html .
Sirve para Tacoma 2014?
@@urielmoreno5864 si
Can I do this trick which is awesome by the way with my 2011 Kia Optima
Unfortunately it is for Toyota/Lexus only.
Hello, you can take a look at this video, I used the comprehensive diagnostic equipment to do this function for Kia cars: th-cam.com/video/bsAyzSyaEPc/w-d-xo.html.
Just subscribed.
Do you know if this will work with a ford thanks
Thank you so much!!
Is it 5 from the passenger side or driver side? This is for a 2016 Toyota Corolla. On yours, the wide part of the trapezoid (obd) is towards the engine and on the Corolla, it’s closer to the driver. Does this make a difference??
Yes it makes a difference. You may blow a fuse if not done correctly. Just pause the video to about 1:58 and match your port to mines. Some ports are upside down/ right side up. Hope this helps.
Will this work on a 21 is350?
@@arrowfence4 yes it should.
Will this work on a 2021 tacoma?
Yes it should.
Newly changed steering unit include motor and torque sensor.But the problem is one side hard another side soft.if any solution this?
Sounds like you have an issue with your rack and pinion.
@@Mr_Fix_It
If turn steering one side smoothly turn but another side too hard its any torque sensor angle position problem?
@@JaiPrakash-bd2xt I don’t think so, they would just give you warning lights sounds like a mechanic issue. Something is broken internally or bent. You need to lift the car up and have some turn the wheels while you look to see if anything is rubbing.
My Toyota Rav4 2004 VSC TRAC warning light doesn't come on dashboard when ignition is turned ON. Any help?
Check your fuses maybe you blow a fuse.
@@Mr_Fix_It will check them out
Think this will work on the 2022 Sienna?
I think it should.
Can't be any type of metal correct
Just not aluminum. You can use a magnet, if it sticks to the magnet you can use it.
Hi buddy, does it work for any Toyota car? For Yaris 2015 too?
Yes it should work
Have you reset on on a Jeep JK?
No, only Toyota/Lexus.
Your door light stays on?
Does it work for nissan or only toyota? Please answer..thanks
No, Nissan. Only Toyota
Will this help with my rav4 code c1203 and c1336 code?
I just did this and it reset it. I had my brake light on,traction Control,and abs light. With codes listed codes above. Hope they stay off. Thank you.
14 Rav4
@@christopher23. I’m glad it worked for you!
I tried this and it never helped, my kdss light just came on instead, what can I do to get rid of kdss light
السلام عليكم كيف نعيد ظبط مستشعر سيارة سنتافي ٢٠١٢ مثل هاي الطريقه
I swept the steering wheel and I’m having this issue and jumping didn’t work in mine
@@WitheAlien you need to recalibrate your position angle sensor. But you’ll need a scanner for that.
This work on. A Highlander hybrid? Same year
Yes
@@Mr_Fix_It my vehicle is in an accident and have not been able to get power steering to work has an electric rack and pinion and a friend of mine has a scanner but we can never get it back to zero point
@@Mr_Fix_It my power steering is still not working steering wheel it hard to move is there something else I need to do?
@@MiguelGarcia-jl3bu You have an issue you need to fix before you can do a reset. Your rack n pinion is electric so check your battery voltage and your fuses and relays. Unless the car has been in a accident then it could have internal damage and may need to be replaced.
@@Mr_Fix_It I appreciate you replying back to me and yes, I have replace the rack and pinion it was used but off of a running vehicle and picking up another rack today and the yaw rate sensor. Someone told me that has something to do with the suspension and alignment components for the vehicle. It was in an accident, I replaced everything as far as suspension
Do you know if it will work for a 2006 Toyota RAV4?
Sorry for the delayed reply, but yes it should!
Hello, you can take a look at this video, I used the comprehensive diagnostic equipment to do this function for VW: th-cam.com/video/YUygYECFsmE/w-d-xo.html .
Hi mr can i do this on ford ranger xlt or toyota mark x
Only on Toyota and Lexus
i have cod p1589 on my vitz 2005 can this method help to solve my problem??
As long as it’s a Toyota. Yes.
@@Mr_Fix_It i tried but dnt work for me
@@izzogenious you have a bad sensor my friend you need to replace it. You need to fix your problem first. My procedure is for resetting after fixing the problem.
@@Mr_Fix_It acceleration sensor learning value i tried another sensor still the same
How about i mitsubishi utility 2011? Willing to tip you as well
Interesting. I’ll try it on Verso ez 2011. I will thank to you later if it works 😂
Can I apply it to my car Avanti 2007 Korea?
No
Will this work on all cars or just toyoyas
Only Toyota’s
The shop should have done this! Send them a bill. Another reason to go to the dealer.
OVD-II pins 4,5 are grounds, 16 is B+, pin 1 is UART, pin 2 is class-2 serial data, GM used pins 12 & 16 but these are open to manufacturers. Check with the dealer as if you set more codes or burn a module or computer who pays?
DK ASE master tech since 78
ACDelco instructor
UTI instructor, retired!
Does this work on 2013 lexus rx450h?
Yes
What does shorting out both pins do? VSC light is not on. Anti-skid light is flashing and beeping when I turn my steering wheel on highway. Does this calibration fix this problem?
Shorting both the pins is pretty much reseting the whole system. You may have a alignment issue or a bent suspension part. I would address the issue and get the alignment first then do the reset.
@@Mr_Fix_It Ok. Thank you for responding so quickly.
@@Mr_Fix_It Do you mean that 'shorting these pins' is the same as clearing ALL codes with an OBD2 tool/reader? And, if jumping these pins ONLY clears codes - why is this also called a 'CALIBRATION'?
I have 3 warnings showing in my instrument cluster (on my 2008 RX350):
- ABS,
- VSC OFF(flashing), and,
- traction control symbol (car with swervy lines behind it).
They just all came on after a gas fill up, I think!
I also have several codes including:
- U0073 (ABS bus communication off),
- C0205 (front speed sensor LH circuit), and
- U0126 (lost communication with steering angle module).
I cleaned the front left ABS speed sensor - it did have some metal clinging to it.
So, now I'm wondering what to do next. I drove the car for 10 minutes - ABS light stays on. Should I use your jump the pins to re calibrate steering angle? (which may reset ALL codes?)
And then should I clear all the codes with the OBD2 scanner?
I also have these codes. Might they all be coming due to ABS error code?:
U0123, C1223, U0124 (replace YAW rate sensor)
C2122
What do you suggest I work on next? (THANKS for any help you would offer!)
@@m.n.3490 Sounds like you have a bad ABS/wheel sensor. I would replace it and clear all codes with a scanner. You can get a speed sensor on Rockauto.com. They probably have the best pricing on auto parts .
@@Mr_Fix_It (I thought I replied, looks like I did not ...)
So,I did look at the sensor, and there was a lot of metal shavings sticking to it. I cleaned it off, thinking the metal shavings was messing up the sensor readings. The sensor line looked good, not cuts or scrapes. I dd not test the sensor line for resistance as I could not find my meter.
What I am not clear on. is, if cleaning the sensor worked, would the ABS light go off after driving the car for a few miles all by itself? Or, would I need to clear the ABS light, drive a few miles, and see if the ABS warning light comes back on?
Since I have so many codes, I'm not sure if they are related to each other in any way. Ex: Like with the BS code of U0073 (control module communic BUS off) and C0205 (Front speed sensor LH circuit). Would cleaning the sensor (or replacing with a new sensor) turn off both U0073 and C0205? Do both need to turn off to clear the ABS light being on?
And do any of the other warning lights relate to ABS? For example do the VSC OFF, or TRAC (swerving car symbol) light up due to ABS light? DO they have their related codes?
Man, this is complicated stuff.
This hack is working for Mercedes C230 kompressor sport coupe W203, 2005?
Good work
Is the same pins on 2005 sienna?
Yes, it should be the same.
Can it work for 2007 lexus es 350
Yes
Does this work on other cars as well? Like Fords?
No this is for Toyota, Lexus and Scion only.
@@Mr_Fix_It tnx for answering
Will this work on my 2015 camry bro
Yes
@@Mr_Fix_It awesome thanks 🤙🏾
@@richardnunez5407did it work for your 2015 camry?
Any idea which pins to use on a 2008 Saturn Vue?
No, I’m sorry.
can you do the same on a 2008 Dodge durango
It’s more for Toyotas I don’t think it would work on American cars.
Can it work for Lexus is 250
Yes it should work.
@@Mr_Fix_It thanks I will try on my is250 always got that problem
Can this work on RAM 1500?
No Toyota’s ONLY.
Is this work for bmw 528i
No
2005 highlander?
Yes
I tried it on my Alphard ANM10 2008 model and nothing happened. Did I miss something?
can work for subaru brz?
No I don’t think so. You will probably blow a fuse
@@Mr_Fix_It can work on toyota gt86? toyota gt86 & BRZ have same system.
what fuse probably blow?
Did it work? I have a scion FRS 2015
@@andrewfernandez2542 not work..
2006 malibu Ltz?????
No this is for Toyota’s. Sorry.
So, I saw another video on recalibrating the steering angle, but, it looks like they used different pins, since the DLC3 is oriented 180 degrees differently than yours. You seem to be using different pins?
In YOUR video the pins used look like: // o o o X o o o o \\.
// o o o X o o o o \\
In OTHER video pins used look like: \\ o o o o X o o o //.
\\ o o o o X o o o //
The other video said to use pins 4 and 12 (where 4 = TS, and 12 = CG)
I have a diagram on my google photos, but, when I tried to post a link here, TH-cam deleted my comment.
Anyways, which instruction should I use? Are you sure you put the paper clip in the correct pins in your DLC3 (OBD2) port?
The OBD port is in different positions in different cars. As long as your car is a Toyota or Lexus or Scion, line up your paper clip like in my video and you should be able to do the reset.
Thanks for your reply.
Ooops, I messed up the diagram above. (Was getting sleepy, lol).
Anyways, what I meant to say was that in the other video, as well as another forum, they said to use pins 4 and 12 (where 4 = CG, Chasis Ground, and 12 = TS, Brake Actuator Assy).
16 13 9
============
In YOUR video the pins used look like: // o o o X o o o o \\.
// o o o X o o o o \\
===================
8 7 6 5 4 3 2 1
(which is pins 5 & 13 where 5 = SGND, and 13 = TC)
16 12 9
============
In OTHER video the pins used look like: // o o o o X o o o \\.
// o o o o X o o o \\
===================
8 7 6 5 4 3 2 1
(which is pins 4 and 12 (4 = TS, and 12 = CG,)
Hey bud can it done on Kia
I don’t think so, this trick is more for Toyota, Lexus and Scion.
@@Mr_Fix_It you think itll work for a new lexus? 2015 lexus rcF? Same pin placement?
@@spikey9azn6 yes sir, it should work. Worst thing that can happen is you blow a fuse.
Hello, you can take a look at this video, I used the comprehensive diagnostic equipment to do this function for Kia cars: th-cam.com/video/bsAyzSyaEPc/w-d-xo.html.
Doesn't work on a 2015 Sienna
A "Teeota" ??
@@justingreen8006 si
started right up and was ready to cut....
2011 sienna did not work
That message something is still wrong. Put a OBD scanner on and see if there are any codes. Maybe a bad ABS/speed sensor. Also just be your alignment is still off. Hope this helps.
mine went out by itsef....... turning steering all de way to de right and left den middle. hope it stay off. car was stolen and crashed by an idiot.
came out after alighnment of our 2013 Corolla, they fucked up... Break Masters lol
The haneys manual says 5 pin top 4th pin bottom
Depends on the position of the OBD port, some cars it’s flipped, like car in the video.
Take the damn key out!
Maybe I’m the only one who can’t get passed the stupid bell chiming but seriously people how can you make a video and expect people to sit and listen when you have the door open chime going off the entire time???
Yes actually the door needs to be open for me to access the OBD port and the ignition on for the reset. I’m glad you can find something negative from something that is useful and free for some people.
@@Mr_Fix_It If you're going to publically put yourself and your videos out on the largest video platform that exists on planet Earth, don't get your feelings hurt when someone addresses a legitimate issue they may have with the "quality" of one of those videos. I lost around 75% of my hearing in BOTH of my ears from a horrific accident in 2018 and have to wear hearing amplifiers and the sound coming from the chime in your video makes both of those amplifiers hit a high pitch and then the sound cracks. Have you ever heard the sound a microphone makes when it gets too close to the speaker that it's connected to? That's the same sound I get to hear when watching this video. This video was neither useful nor free for me. Also, if you would've turned the key to the "on" position instead of having it on "accessory," you'd noticed that the chime would've gone away.
@@dennishickmaniii3672 If you can't hear this sound, how would you do it live? This sound is in the van, do you have one? There's no need to behave like that when he's helping. There are much worse sounds on this platform. Regards.
Mitsubishi Lancer is also possible? There are three error codes: C1290, C1219, and C2205, but the code cannot be deleted even with a scanner, and the alarm continues to ring even when driving.
No this is for Toyota cars
This hack is work on hyundai tiburon fx ?
Will this work on a 2014 scion tc?
Yes
Would this work on a 2015 frs I did change my steering wheel, but the clockspring is literally fine and centered at the top
Yes it should.
Will this work on 2010 fj cruiser?
Yes
hi，on my corolla the vsc didnt blink but the anti-ski logo is blinking and beeping while i turning the steering wheel，the light not always came out but only sometime. can this method done on my corolla？
Yes but sounds like you have a bad ABS sensor or alignment issues that need to be addressed first.
@@Mr_Fix_It what is ABS sensor？ is it speed sensor？
@@ahyeong98 yes speed sensor.
@@Mr_Fix_It alright，ill try check those problems. Thanks mate. much appreciate
Work on fj cruiser too?
Yes