We'd love to be able to post this FLEXTASTIC project on our social media pages. Please email us at humans@flexsealproducts.com so we can discuss this more! 💪🔛
@@robertsonfamilyadventures7082 thanks! I have a pond similar to yours that just gets nasty from being stagnant throughout the summer and there was no way I was going to spend 2k+ on a fountain
@@UncleJessy also check pond aquatics magazine and they have different treatments for algae bloom problems. We were in the same boat reason why we researched and came up with this. Has helped our fish and the look of the pond.
Hi . You were short of cord from the pump to the receptacle . How did you safely extend the extension cord or did you just move the pump closer. I was thinking to run a really nice cord thru a flexible one piece pipe out to the pump float . But as a DIY er I'm about saving money lol but still doing it safely . !!! Do you remove it during the winter or just unplug it
Excellent work guys, it's brilliant to see a father son effort. You guys made a fantastic and professional looking fountain. It's great to see the skills being passed down.
Thank you for posting the video,. Always wanted one but could never afford one. Followed your instructions, now I have a fountain. You made it possible🏆 God Bless You, Daryl
Look into a Hiblow diaphragm pump with one or two diffusers. You can make em. Its low pressure so the diffusers need to be at about 4ft depth at most. It will aerate and you can run it 365. Keeping the water open in winter is VERY helpful for the fish. Pump doesn't use much power and it'd be perfect for your small pond. Thanks for a cost effective fountain. Much appreciated.
To attain higher fountain height taper down from 3” to 2”. Revise Cap hole design, 3 equally spaced 1/8 inch slots near the outer perimeter of the cap the drill symmetrical holes different sizes. One hole at center. There is a spray foam for ponds and pools. Good job! Thank you.
When using a fountain to prevent pond turn over you need to make sure the water feeding the pump is draw from the bottom (colder) of the water column. Your essentially trying to mix the water in the top of the column with the colder water resting at the bottom.
I also made your fountain and it works great but I was just wondering why do we reduce the pipe from the pump 3” to 2” then the nozzle back to 3”??? Could we just stay at 3” straight up to the nozzle??
How’s it holding up a year later. I liked your idea and execution. I’m in the process of building one (replacing the not so great one that was in the pond when we bought the place) and thinking of doing it like yours. But wondered how the foam was holding up.
@@robertsonfamilyadventures7082 So you cut the plugs off of both the pond fountain and one end of an extension cord? And then you manually wired/spliced those wire ends together and shrink wrapped that?
What did you do to resolve the length of the cord for the pump? You said at the end on the dock that you needed more length than what came original to the pump. An extension cord plugged into a GFI?
I went to Home Depot and bought 30 feet of submersible pump wire. Then I spliced the two together using butt connectors and heat shrink. Then I put a bigger heat shrink over the entire connection and let it dry. That is hardwired to a GFI plug.
Thinking of buying the same pump as you and making this same fountain as well. Has it held up and would you still do it the same way or would you change anything? Thank you!
This is a fantastic video. You have inspired me to do this project with my son.. can't wait! You saved about 2k doing it this way instead of buying a fountain, plus, have the bonus of having fun building it! Smart! One question I have.... have you considered adding led lights to it? I love the look of the fountains that light up at night.. and I am thinking it might not be too hard to accomplish. What are your thoughts?
I did look into the LED lights, just wasn’t sure of which direction to go. There has been advancements with the LED lights that I think it would be a great asset to the fountain.
Another question for you. I got the same kind of pump (9000gph) and someone who I trust told me if I put a cap on the top, like you, I would restrict the water flow and burn up the pump. Have you experienced anything like that with your setup?
9000 gph (gallon per hour) commercial submersible water pump by aqua max. In one of the earlier comments we placed the link which was purchased on eBay.
I think I'd prefer a minumum 3/4 hp (1hp=746w) with overload protection. But IMO I'd pay a little extra for a better model pump. Remember, GFCI ONLY protects from ground fault, NOT an overcurrent/overload condition. Must keep filter clean. If the pump fails it has already been running at higher amps, motor windings heated and fused, etc. If really wanted to protect from overcurrent/overload, as an added protection put an inline fuse holder and fuse in a larger 4" receptacle box with the GFCI (maybe 8-10 amps).
Working on something like this myself do you think if I had to run an extension cord a 100' to run the sump pump do you think I would need a 12 Gauge or all the way down to a 10 gauge cord for that length of run
@@robertsonfamilyadventures7082 i’m just doing it the same way you did it, I got a big kick out of the video you guys kept saying not to smell the glue but you kept smelling the glue, I know it was just a joking way. It was hilarious though, I showed the video to my wife she has been after me for a while put a fountain in the pond. But like you I did not want to spend a few thousand dollars to do it.
@@bamafan62 The only thing I would change is instead of glued fittings use threaded screw in type fittings. Good luck on your project. This is just an afterthought on the project.
Im wondering what the cost is to operator the advantage of the aerators is it uses a diaphram pump and a lot less power so the TCOO may actually be higher. Of course you also don't get a cool fountain without the aerator
Good way to lose a finger or leg with your circular saw technique. Your blade should never be extended beyond what you need to cut. , which was about 1/8". Also dont brace something with your fleshy thigh.
I like the video but you as a parent have to watch your kid sniffing that glue. They get sick from smelling that glue. You could tell he as hooked. I had to work around glue once where I became sick as a junk yard dog. You kept saying DO NOT SMELL THE GLUE. WHY!!!! Didn't you mean what you said. Be an EXAMPLE!!!!! Other than that I like the video.
I'm sorry, I laughed my butt off Everytime your kid was off to the side sniffing the glue, the faces he made 😂.
My daughter a neighbor and myself followed your directions after watching your video. Works like a charm! Thank you for sharing.
The perfect summer addition! 😎
We'd love to be able to post this FLEXTASTIC project on our social media pages. Please email us at humans@flexsealproducts.com so we can discuss this more! 💪🔛
@@FlexSeal absolutely, we will email you.
This was the best video I’ve seen on making a DIY pond fountain. Would love to hear what your typical maintenance is with it
Thanks. About every 6 months pull the fountain out, clean the intake screens and check the electrical connections.
@@robertsonfamilyadventures7082 thanks! I have a pond similar to yours that just gets nasty from being stagnant throughout the summer and there was no way I was going to spend 2k+ on a fountain
@@UncleJessy also check pond aquatics magazine and they have different treatments for algae bloom problems. We were in the same boat reason why we researched and came up with this. Has helped our fish and the look of the pond.
Hi . You were short of cord from the pump to the receptacle . How did you safely extend the extension cord or did you just move the pump closer. I was thinking to run a really nice cord thru a flexible one piece pipe out to the pump float . But as a DIY er I'm about saving money lol but still doing it safely . !!!
Do you remove it during the winter or just unplug it
Excellent details, thank you for sharing. Like others have mentioned, your son and the glue was priceless funny…
Thanks for the video. I made the same fountain thanks to you and it's perfect for my pond!
Excellent work guys, it's brilliant to see a father son effort. You guys made a fantastic and professional looking fountain.
It's great to see the skills being passed down.
Thanks for watching!
much respect for you and your son. Great job
Thank you for posting the video,. Always wanted one but could never afford one. Followed your instructions, now I have a fountain.
You made it possible🏆
God Bless You,
Daryl
Couple wiffs lol
Nice fountain man, definitely moved to the top of the to do list
Very cool project thanks ❤
Thanks for making and sharing this video, great idea! I love building instead of buying, I’m gonna give this a shot.
Great job ❤
Look into a Hiblow diaphragm pump with one or two diffusers. You can make em. Its low pressure so the diffusers need to be at about 4ft depth at most. It will aerate and you can run it 365. Keeping the water open in winter is VERY helpful for the fish. Pump doesn't use much power and it'd be perfect for your small pond. Thanks for a cost effective fountain. Much appreciated.
To attain higher fountain height taper down from 3” to 2”. Revise Cap hole design, 3 equally spaced 1/8 inch slots near the outer perimeter of the cap the drill symmetrical holes different sizes. One hole at center. There is a spray foam for ponds and pools. Good job! Thank you.
Good job guys!
When using a fountain to prevent pond turn over you need to make sure the water feeding the pump is draw from the bottom (colder) of the water column. Your essentially trying to mix the water in the top of the column with the colder water resting at the bottom.
Valid point. Thank you for your input on how to keep our ponds more healthy.
I also made your fountain and it works great but I was just wondering why do we reduce the pipe from the pump 3” to 2” then the nozzle back to 3”??? Could we just stay at 3” straight up to the nozzle??
Nice job guys. New follower. I’m going to do something similar soon.
How much does it cost to run
what a great idea
How’s it holding up a year later. I liked your idea and execution. I’m in the process of building one (replacing the not so great one that was in the pond when we bought the place) and thinking of doing it like yours. But wondered how the foam was holding up.
Still going a year later. We have it on a timer for twice a day for 2 hours at a time.
On the pond pump how many gallons per hour pump did you purchase for this project ?
how did you extend the cord and or make it waterproof? great video , thank you for sharing
We used heat shrink designed for underwater applications.
@@robertsonfamilyadventures7082 So you cut the plugs off of both the pond fountain and one end of an extension cord? And then you manually wired/spliced those wire ends together and shrink wrapped that?
Great video! I love the simplicity of your build. Question, how deep is your pond? I have a pond and looking to do something similar.
12 foot is there depth. Good luck on your project!
Nice job. Could you share the link where you purchased the pump?
ebay, I believe the link is further down in the comments.
Great video, I'm going to give it a shot. What pump did you use?
9000 gph (gallon per hour) commercial submersible water pump by aqua max. Was purchased off eBay
Where did you find that pump to purchase? What HP is it?
What did you do to resolve the length of the cord for the pump? You said at the end on the dock that you needed more length than what came original to the pump. An extension cord plugged into a GFI?
I went to Home Depot and bought 30 feet of submersible pump wire. Then I spliced the two together using butt connectors and heat shrink. Then I put a bigger heat shrink over the entire connection and let it dry. That is hardwired to a GFI plug.
@@robertsonfamilyadventures7082 good to know! Thanks for the info and video.
Was the chord on your pump already that long did you use a waterproof connecter to a extension chord
We used a waterproof butt connectors, heat shrink, and wrapped with electrical tape.
Thinking of buying the same pump as you and making this same fountain as well. Has it held up and would you still do it the same way or would you change anything? Thank you!
9000 gph (gallon per hour) commercial submersible water pump by aqua max. We purchased it off eBay
This is a fantastic video. You have inspired me to do this project with my son.. can't wait! You saved about 2k doing it this way instead of buying a fountain, plus, have the bonus of having fun building it! Smart! One question I have.... have you considered adding led lights to it? I love the look of the fountains that light up at night.. and I am thinking it might not be too hard to accomplish. What are your thoughts?
I did look into the LED lights, just wasn’t sure of which direction to go. There has been advancements with the LED lights that I think it would be a great asset to the fountain.
Another question for you. I got the same kind of pump (9000gph) and someone who I trust told me if I put a cap on the top, like you, I would restrict the water flow and burn up the pump. Have you experienced anything like that with your setup?
@@TopFitnessStrategies still going. Not issues with the pump.
Any updates?
@@xkitchick still no issues. Needed to replace the cap but running well.
this is great. Good job man. You said you had to straighten it out, were you talking about it not floating level?
Yes, we had to counter weight the sides so it would level out.
what was the brand and make of the pump and what site did you buy it from? Great video
9000 gph (gallon per hour) commercial submersible water pump by aqua max. In one of the earlier comments we placed the link which was purchased on eBay.
I think I'd prefer a minumum 3/4 hp (1hp=746w) with overload protection. But IMO I'd pay a little extra for a better model pump. Remember, GFCI ONLY protects from ground fault, NOT an overcurrent/overload condition. Must keep filter clean. If the pump fails it has already been running at higher amps, motor windings heated and fused, etc. If really wanted to protect from overcurrent/overload, as an added protection put an inline fuse holder and fuse in a larger 4" receptacle box with the GFCI (maybe 8-10 amps).
Good idea. So far no issues with ours 2 years later.
How is it holding up after 1 year and do you leave it on all the time?
Still going. It is programmed to come in twice day at 2 hours each time.
do you have a list of materials please? very interested
Pump was on eBay, we used flexseal and different pipping as described in the video.
How do you go fishing with live electrical wire hanging in the water?
All of the wirings are sealed and meant to be in the water. There aren't any issues with fishing. Good luck with your project.
How often do you have to clean the pump from weeds, debris, or build up?
We are about to do a video on maintenance and cleaning soon. About every 3-4 months.
Did you plug this into direct power? Trying to figure out a solar/12 volt option, as we do not have power running to our pond.
Yes we ran power underground to our pool pump panel. I am not familiar on solar panels but I am sure that would definitely be an option
Working on something like this myself do you think if I had to run an extension cord a 100' to run the sump pump do you think I would need a 12 Gauge or all the way down to a 10 gauge cord for that length of run
My advice is run the heavier gauged wire. Good luck on your project.
I’m in the process of making one, Have you had any issues with it yet
Still working. No issues to date. Good luck with your project.
@@robertsonfamilyadventures7082 i’m just doing it the same way you did it, I got a big kick out of the video you guys kept saying not to smell the glue but you kept smelling the glue, I know it was just a joking way. It was hilarious though, I showed the video to my wife she has been after me for a while put a fountain in the pond. But like you I did not want to spend a few thousand dollars to do it.
@@bamafan62 The only thing I would change is instead of glued fittings use threaded screw in type fittings. Good luck on your project. This is just an afterthought on the project.
How’s Hyde pond fountain holding up after a year?
Still going. Did maintenance twice this year and adjusted on times but still holding strong 😎. Thanks.
What was the pump you got on Amazon link please
It was on eBay here is the link www.ebay.com/p/1244722040
Dude your kid is huffing glue!...🤣😵💫🤸
Hi. What name pump did you by?
9000 gph (gallon per hour) commercial submersible water pump by aqua max. Got it off eBay.
Im wondering what the cost is to operator the advantage of the aerators is it uses a diaphram pump and a lot less power so the TCOO may actually be higher. Of course you also don't get a cool fountain without the aerator
What brand pump is that?
9000 gph (gallon per hour) commercial submersible water pump by aqua max
@@robertsonfamilyadventures7082 Got a link we cant seem to find it either
@@zippinzach1517 www.ebay.com/p/1244722040
Hope this helps.
How big is your pond?
About 200 ft diameter.
@@robertsonfamilyadventures7082 what pump did you use?
@@MichaelsandAssociates. 9000 gph (gallon per hour) commercial submersible water pump by aqua max. Found it on ebay.
He’s a right little sniffer
Good way to lose a finger or leg with your circular saw technique. Your blade should never be extended beyond what you need to cut. , which was about 1/8". Also dont brace something with your fleshy thigh.
@@jordangram thanks for being our safety director and letting us know.
Can’t watch anymore of that kid huffing glue! 😵💫
@@amyadams4066 thanks for watching.
Pool noodles would be cheaper at the dollar tree lol
Looks great
Future junkie In the making. I mean he's really hitting that glue heavy. Can't see it without talking a hit or 2
Thanks for watching.
Leave the kid out of it until he's old enough not to wanting the attention.
@@dawnstead3329 thanks for watching.
@@dawnstead3329 appreciate the view.
I like the video but you as a parent have to watch your kid sniffing that glue. They get sick from smelling that glue. You could tell he as hooked. I had to work around glue once where I became sick as a junk yard dog. You kept saying DO NOT SMELL THE GLUE. WHY!!!! Didn't you mean what you said. Be an EXAMPLE!!!!! Other than that I like the video.
Thanks for watching!
I hope you keep that glue from the boy. He was getting loaded. Not a joke!!!
The boy is doing well and thank you for your concern and watching.