I enjoyed watching this video cause you actually taught me how to change stock muffler on my 50cc 4stroke to a racing muffler easily...I hope u do more videos of how to upgrade full 50cc 4stroke moped to racing. Thanks alot for helping me
@@860jayfresh2 it would still hit the same top speed it would just get there faster if you want to change the top speed you would need to change your final drive in the transmission
I have long block 50cc...got 47mm kit and did around 1600 miles in 4 months since i bought it with 5000 miles on the clock...it has two gross yelow tractor 25/25w bukbs...do you know where can i get like led or xenon to replace it? i got 35/35w but it can't power it up....also those hamd protectors are really cool...keep it up
Zodiark-1993 the leds lights are hit and miss honestly it depends on the housing there in I couldn't find any for mine except for the small 194 bulbs in the cluster and running lights but nice man I jumped mine up to a 80cc and the engine didn't like it much it ran for like 450 miles and then the rod actually snapped and went threw the case that's when I 150 swapped it and well hands down that woke it up big time but thank you hopefully you build your scooter up to what you really any out of it
Yeah i watched it and it scared mi a bit...my last one with short block did over 15000 miles...last 3000 were done with bbk and then i sold it stock again...kid i sold it is riding happy with it...who knew...thanks for the help...your scoot is sick machine
Hello! I would like to ask what is the purpose of the pipe you took out of the exhaust? Its advantage? Disadvantage? Thank you in advance for your answer!
Question .. the end that you screw into the scooter, is that a generic size? And what should I look for when looking for a muffler for my gy6? Besides 50cc? Any help is much appreciated man
The bolt caps for the head of the motor to fasten the header to the head are 10mm. But the bolts holding the muffler to the header I forget that size there's alot of different types butttttttt some have terrible fitment just keep that in mind.
You kind of need the clamp portion at the end. Without it there the exhaust will probably crack and fall off. Do you mean it will just be supported by the engine bolts ?
Yeah I've been trying to find one that I won't have to weld on or do any other really complex shit to make it fit. Did you notice performance increase as well after the install?
Alex Kirby I did notice it was more responsive throttle wise but whenever you drop a muffler on you need to rejet the carb as well so it might have just been the rejetted carb more then anything this muffler had the removable baffle which made the sound change alittle if it was out
I just bought this one: www.ebay.com/itm/GY6-50CC-80CC-100CC-SCOOTER-HIGH-PERFORMANCE-RACING-EXHAUST-PERFORATED-MUFFLER/112581163290?hash=item1a365c391a:g:kB4AAOSwdelZzSES#rwid My moped is already quite loud with the stock exhaust so can't wait to install it and remove the baffle :)
I enjoyed watching this video cause you actually taught me how to change stock muffler on my 50cc 4stroke to a racing muffler easily...I hope u do more videos of how to upgrade full 50cc 4stroke moped to racing. Thanks alot for helping me
Thanks man and you could easily rebuild the top end for a big bore kit if you want alittle extra power it's not to difficult just gotta take your time
@@RspecNick how fast would a 50cc go if i add a bigbore kit to it since it hits 40-50mph now
@@860jayfresh2 it would still hit the same top speed it would just get there faster if you want to change the top speed you would need to change your final drive in the transmission
@@RspecNick see stuff like dat ima need videos & details cause idk shit when it comes to mopeds lol 😂😂
@@860jayfresh2 lol it's really not that bad there's a lot of install videos on big bore kits for scooters
Oh man this is the exact style moped I want!
The tao tao bws50?
Good presentation good Job
preciate you my man🤟🏽
W/o the baffle for the W!
Cool stuff!! i just took all insides of my stock exhaust.....this one looks much better thou
Zodiark-1993 yea it really changed the look of it alot and the sound now I have a icebear maddog 150 I'm gonna start modding out alittle bit
I have long block 50cc...got 47mm kit and did around 1600 miles in 4 months since i bought it with 5000 miles on the clock...it has two gross yelow tractor 25/25w bukbs...do you know where can i get like led or xenon to replace it? i got 35/35w but it can't power it up....also those hamd protectors are really cool...keep it up
Zodiark-1993 the leds lights are hit and miss honestly it depends on the housing there in I couldn't find any for mine except for the small 194 bulbs in the cluster and running lights but nice man I jumped mine up to a 80cc and the engine didn't like it much it ran for like 450 miles and then the rod actually snapped and went threw the case that's when I 150 swapped it and well hands down that woke it up big time but thank you hopefully you build your scooter up to what you really any out of it
Yeah i watched it and it scared mi a bit...my last one with short block did over 15000 miles...last 3000 were done with bbk and then i sold it stock again...kid i sold it is riding happy with it...who knew...thanks for the help...your scoot is sick machine
Zodiark-1993 thanks man
Next time use a piece of tape to hold washer while starting nut, then pull off tape and tighten rest of way
Just bought this same exhaust now did u remover the baffel without damaging it
Mine just unbolted
@@RspecNick what did u use to get hold off it to unscrew
Hello! I would like to ask what is the purpose of the pipe you took out of the exhaust? Its advantage? Disadvantage? Thank you in advance for your answer!
It's a more free flow design allows the engine to breathe easier
@@RspecNick Thanks for the reply. But what is the positive benefit?
@@Gytzr7560 more power slightly faster throttle response
@@RspecNick thanks
That thing that you screwed out of the muffler can you leave that off if you want while driving it
Yes you can I drove like that for awhile
Question .. the end that you screw into the scooter, is that a generic size? And what should I look for when looking for a muffler for my gy6? Besides 50cc?
Any help is much appreciated man
The bolt caps for the head of the motor to fasten the header to the head are 10mm. But the bolts holding the muffler to the header I forget that size there's alot of different types butttttttt some have terrible fitment just keep that in mind.
Nice video. I bought the same tires
Thanks man
Hi what was your speed/acceleration gain after installation?
Very slight change in take off speed and not very noticeable top end change.
I am thinking about getting a new exhaust for my Yamaha Razz are 50cc scooter exhaust mostly universal?
Duck yes for the most part some do require alittle modification but overall it's pretty straight forward
i bought this but my moped doesn’t have the thing to screw the clamp into can i still use this?
You kind of need the clamp portion at the end. Without it there the exhaust will probably crack and fall off. Do you mean it will just be supported by the engine bolts ?
shouldnt you jet the engine too??
If the jetting needs it. this engine was already running on more fuel then it should have been so it evened out good
Can this be used with all scooters?
For the most part yes as long as it's the gy6 scooters
@@RspecNick THX
@@RspecNick Is sym jet 14 50cc a GY6? I don't really know about it.
Did the sports muffler added more power?
It opened it up more on the top end
where did you bought it from
EBay.com
neither one of those are stock pipes
Where can I buy this exhaust?
Alex Kirby I got mine just by doing a Google search it came up with a bunch of different ones.
Just type in 50cc gy6 performance muffler and it will pull up alot eBay has alot as well this one was like 60 dollars and it was a direct fit.
Yeah I've been trying to find one that I won't have to weld on or do any other really complex shit to make it fit. Did you notice performance increase as well after the install?
Alex Kirby I did notice it was more responsive throttle wise but whenever you drop a muffler on you need to rejet the carb as well so it might have just been the rejetted carb more then anything this muffler had the removable baffle which made the sound change alittle if it was out
I just bought this one: www.ebay.com/itm/GY6-50CC-80CC-100CC-SCOOTER-HIGH-PERFORMANCE-RACING-EXHAUST-PERFORATED-MUFFLER/112581163290?hash=item1a365c391a:g:kB4AAOSwdelZzSES#rwid My moped is already quite loud with the stock exhaust so can't wait to install it and remove the baffle :)