Apparently this technique to knot the string to the connector charm dosent work for stretch magic string the loop un- do’s itself even with the beads there to try and hold it down
That’s correct. That is a completely different kind of cording and will have different techniques. If you need a link for some more professional cording, check it out here and you should be good to go! oneglancejewelry.com/search?q=stretch+cord Also if you need to see some details about what makes this cord d different than the stretch magic, check out our other video called stretch bracelets you can trust :)
So pretty! Thx for sharing. Question: am I supposed to stretch the elastic cord before stringing. Haven’t finished code yet. Or am I confused as to what kind of cord you’re using?
Yes, you will need to glue the knot and you will trim as close as possible after gluing. This video is a part two to our original stretch bracelet video that you can check out here: th-cam.com/video/daWRbpHxM5Y/w-d-xo.html and it will have a better visual and details on the gluing and cutting portion for you. Hope that helps!
So glad you enjoyed it! We sell the cord and everything that goes with it on our website, and you can check it out here: oneglancejewelry.com/products/stretch-cord-1-roll , hope this helps!
i have had so many beads that wont go down alot of those needles ones they hit the string bit what size are they? and the conectors what are they called
If you are using our cord, the ultra fine needle should help with the beads not fitting. If you are using other brands of cord, you may want to try ours because the way the fibers are woven together like fabric, it will collapse down thinner than others as you string the beads on. Between the two of those options, the only beads you may have issues with are the extra tiny 2-3mm ultra fine gemstone beads- other than that, it should work out for you. Link for the ultra fine needle is here: oneglancejewelry.com/search?q=ultra+fine+ , and link for the stretch cord is here: oneglancejewelry.com/search?q=stretch+cord+ . As for the connectors, they are just called connectors as they have a loop on each side, and the stone itself is crystal. Hope this helps!
@@starrspoter Sure, we can definitely do that for you, I will just need to invoice you for the additional shipping cost. Basically we will send you a second invoice after you place your order with the additional shipping fees. The beads are 8mm, and I do actually have one of those connectors left and that piece is $6.
@@oneglance8759 it says on the page cant send international.so if i made an account it wouldnt like putting australia.but before i oder i would need a rough guess what postage might be.at times it cost more then the items
No problem, just send me an email to one.glance.jewelry@gmail.com with which items you would like and the shipping address and I can send you a total :)
So you can use any size beads and any size connector you like for this project, but the beads shown in this example are 8mm and the connector is about 1".
This is an item that we used to carry in the past, but unfortunately it is now out of stock. We just got in some fun new ones in this same shape though that will be listed on out website next week in tons of new colors along with a new tutorial video to show some other fun ways you can use them!
Absolutely! The link for the stretch cord is here: oneglancejewelry.com/products/stretch-cord-1-roll?_pos=1&_sid=db06dfade&_ss=r , and if you need any of the other items, just check the description box below the video-you may have to click the drop down arrow to show the full text in the box. Thanks!
Omg thank you for this tutorial. I took some charms back to the store because I couldn't figure out how to not get the string to show. Lol. Now I'm going back to get them 🤣🤣🤣 I'm a new sub by the way.
Short, to the point and SUPER informative! Thank you!!!!
Exactly what we were going for! Glad it helped :)
so cool 😎, Another tutorial made it so complicated but you simplified it thank you thumbs up
So glad you liked it! We try to keep it nice and simple!!
Well that is simpler than I thought. Thank you for this short, but awesome tutorial 🥰.
So glad you like it! Have fun!!
Straight to the point! Love it
This is so awesome and simple. Great tutorial! Thank you!
Thanks! So glad you enjoyed it :)
Wow super easy and detailed perfect
Awesome! So glad to help :)
Apparently this technique to knot the string to the connector charm dosent work for stretch magic string the loop un- do’s itself even with the beads there to try and hold it down
That’s correct. That is a completely different kind of cording and will have different techniques. If you need a link for some more professional cording, check it out here and you should be good to go!
oneglancejewelry.com/search?q=stretch+cord
Also if you need to see some details about what makes this cord d different than the stretch magic, check out our other video called stretch bracelets you can trust :)
Thanks so much for this awesome tutorial!
You are so welcome! Glad I could help :)
So pretty! Thx for sharing. Question: am I supposed to stretch the elastic cord before stringing. Haven’t finished code yet. Or am I confused as to what kind of cord you’re using?
Thx for sharing
Thanks for asking! This type of cording is different because it is a fibrous type cording and it does not need to be pre-stretched!
@@oneglance8759 oops. Meant I hadn’t finished the video yet. Thx for showing how to’s!
@@bgtsy no problem! Glad it was helpful!
How close do you cut the cord to the knot? Do you use glue on the knot? Won’t the knot come right out after a few stretches?
Yes, you will need to glue the knot and you will trim as close as possible after gluing. This video is a part two to our original stretch bracelet video that you can check out here: th-cam.com/video/daWRbpHxM5Y/w-d-xo.html and it will have a better visual and details on the gluing and cutting portion for you. Hope that helps!
@@hvictorianrose thank you so much for your reply!!!!!! I’ve been driving myself nuts haha!
@@ashleyarbaiza you’re welcome! Have fun :)
Thank you so much! This was so helpful ❤
Very helpful,thank you
What mm bead did you use please?
For this project I used an 8mm bead, but the technique can be done with any sized bead you would like to use.
@@oneglance8759 Thanks!🤗
hi! where do you get your string?? :) also amazing tutorial! love it and you!!
So glad you enjoyed it! We sell the cord and everything that goes with it on our website, and you can check it out here: oneglancejewelry.com/products/stretch-cord-1-roll , hope this helps!
@@oneglance8759 ty so much!
Couldn’t you do this same technique with waistbeads?
Yes, absolutely! We have customers that make them with this method all the time!
i have had so many beads that wont go down alot of those needles ones they hit the string bit what size are they? and the conectors what are they called
If you are using our cord, the ultra fine needle should help with the beads not fitting. If you are using other brands of cord, you may want to try ours because the way the fibers are woven together like fabric, it will collapse down thinner than others as you string the beads on. Between the two of those options, the only beads you may have issues with are the extra tiny 2-3mm ultra fine gemstone beads- other than that, it should work out for you. Link for the ultra fine needle is here: oneglancejewelry.com/search?q=ultra+fine+ , and link for the stretch cord is here: oneglancejewelry.com/search?q=stretch+cord+ . As for the connectors, they are just called connectors as they have a loop on each side, and the stone itself is crystal. Hope this helps!
@@oneglance8759 im from australia do u post worldwide?and what size beeds u use here and whats the conector do u sell them
@@starrspoter Sure, we can definitely do that for you, I will just need to invoice you for the additional shipping cost. Basically we will send you a second invoice after you place your order with the additional shipping fees. The beads are 8mm, and I do actually have one of those connectors left and that piece is $6.
@@oneglance8759 it says on the page cant send international.so if i made an account it wouldnt like putting australia.but before i oder i would need a rough guess what postage might be.at times it cost more then the items
No problem, just send me an email to one.glance.jewelry@gmail.com with which items you would like and the shipping address and I can send you a total :)
What size is the beads? What size is connector?
So you can use any size beads and any size connector you like for this project, but the beads shown in this example are 8mm and the connector is about 1".
@@oneglance8759 oh okay thank you so much 😊
@@kalenecazaubon-sample1654 You're welcome!
Where can I find nice connectors like that
This is an item that we used to carry in the past, but unfortunately it is now out of stock. We just got in some fun new ones in this same shape though that will be listed on out website next week in tons of new colors along with a new tutorial video to show some other fun ways you can use them!
What brand of cord are you using? I do not see the links. Thanks!
Absolutely! The link for the stretch cord is here:
oneglancejewelry.com/products/stretch-cord-1-roll?_pos=1&_sid=db06dfade&_ss=r ,
and if you need any of the other items, just check the description box below the video-you may have to click the drop down arrow to show the full text in the box. Thanks!
Awesome! Thank you
You are so welcome! Have fun :)
Omg thank you for this tutorial. I took some charms back to the store because I couldn't figure out how to not get the string to show. Lol. Now I'm going back to get them 🤣🤣🤣 I'm a new sub by the way.
Yay! So glad we could help! Have fun with your project :) And welcome to the family!
This is beautiful were did you get the beads and connectors from. Thank you😊
I love it 😻
Thanks! So do we :)
so hard to hear you