I am still hoping that Hawk would have the Talon rotors (even if it just the front) for this model. I have Hawk Talon rotors and HPS pads on my 2018 Rav4 XLE = excelent stopping power. Yes, use regular brake grease on the caliper slide bolts, but I used a lithium soap/rubber-safe grease on the rubber area of the brake piston. I will use this as a guide when mine is due.
i have 2018 chr xle premum that has electric braking system question is brake replace same way as you did your vehicle. or i have to dis engage parking brake first.from system i am talking electric parking brake replay please if you know correct answer.
Is it electric? Does it need to be retractable by electricky? Also it may be a little crooked try to straighten it out and put it in. That is of course if it's a hydraulic one
Whats the torque specs for the caliper bracket bolts? Nothing is at the description.
I am still hoping that Hawk would have the Talon rotors (even if it just the front) for this model. I have Hawk Talon rotors and HPS pads on my 2018 Rav4 XLE = excelent stopping power.
Yes, use regular brake grease on the caliper slide bolts, but I used a lithium soap/rubber-safe grease on the rubber area of the brake piston. I will use this as a guide when mine is due.
Very good job, Thank You.😊👍
i have 2018 chr xle premum that has electric braking system question is brake replace same way as you did your vehicle. or i have to dis engage parking brake first.from system i am talking electric parking brake replay please if you know correct answer.
Thank you, you are a lifesaver!
Can you make a video of the rear
i know this was a year ago but how much did the pads cost from the dealer??
Sensor on brakes pads install top or bottom it's will determine noise when you backup or go forward when brakes wear out
My rear calliper piston won’t retract. It’s all the way out. Help?
Is it electric? Does it need to be retractable by electricky? Also it may be a little crooked try to straighten it out and put it in. That is of course if it's a hydraulic one
Where is the torque specs!
Why in the hell would you upvote this. Getting the hardware in is not hard, finding the friggin torque specs is. Screw this