Pa sagot naman po nasan po yung passitive at negative i didi rik kopo sana ng cord idol kaso di ko nakita asan hung positive at negative kase diritso kona po sa cord pwede po bayun?
Pwede naman kaso pag nag over amperage maaring masira charging ic. Kung gusto mo mag bypass pwede sa battery since di mo na sya gagamitin sa battery yung speaker
but in the end it was loading? I have the same one and when I connect the charger it does not charge the battery., I disassembled the speaker and look at the charging pin and everything is fine, what problem will mine have? regards
I have the same device but there's a problem and hope you can help. The device doesn't power on but charges fine with the charging indicator increasing to max. When power button is pressed, nothing happens. What would you suggest might be the issue or how to diagnose please?
Use cutter knife and pry out carefully (for this speaker only) For original JBL, there are screws inside the grills. Remove then unfastened the screws. Then the passive radiator of JBL Charge 2 has 4 screws inside the ring cover.
@@JaypiTechPHOfficial sir actutully my brother purchased it i don't know from where he purchased but nowdays in this speaker the white cable inside the speakrr is damaged and i can not find the same wire in market can you give an alternate idea to connect the motherboard to the button plate
@@vinayrawat2781 i don't know exactly how to locate the power button. Because of the connection of ribbon cables, there is a supply for charging and power indicator. So the button pcb is needed.
good day, ask lang po sana ako kung paano po mapagalaw ang dalawang speaker sa gilid ? nag play ako ng BASS MUSIC tapos naka full volume lahat, di kasi sya gumagalaw . yung iba kasi gumagalaw eh hehehe, Bought from shoppee
Nice good troubleshooting.. Keep it up sir!
Thanks! 😉
I don't see any trouble in his shooting 😜😁✌️
First!🤗😉
Almost!
Then let's rock 🕺🕺🕺🕺🕺
Pa sagot naman po nasan po yung passitive at negative i didi rik kopo sana ng cord idol kaso di ko nakita asan hung positive at negative kase diritso kona po sa cord pwede po bayun?
Pwede naman kaso pag nag over amperage maaring masira charging ic. Kung gusto mo mag bypass pwede sa battery since di mo na sya gagamitin sa battery yung speaker
Bale ireremove mo lang yung 18650 battery then dun mag tap sa battery supply papuntang USB
@@JaypiTechPHOfficial idol pwede po ba gawa kayu tutorial😥🥺
@@JaypiTechPHOfficial kuya pwede gawa tutorial 🥺😥
but in the end it was loading? I have the same one and when I connect the charger it does not charge the battery., I disassembled the speaker and look at the charging pin and everything is fine, what problem will mine have? regards
Problem with 18650 battery/charging circuit.
May plastic na ginagamit pambukas para d masira
I have the same device but there's a problem and hope you can help. The device doesn't power on but charges fine with the charging indicator increasing to max. When power button is pressed, nothing happens. What would you suggest might be the issue or how to diagnose please?
Maybe your decoder has the problem.
Paano po gawin 2 yung battery. Parallel po b o series
Golden cable how many pins you use ?
5 pins
@@JaypiTechPHOfficial ok this is super charge 2 +?
Charge 2 plus uses angular USB-B charging port used for JBL Charge 3.
Yes i have fake copy of jbl super charge 2 + and there are 6 pins in that i think so
There are extra pins there. And the + and - terminals are important
👌👍
pwd po ba palitan ng battery ng vape ung ganyan? molicel 18650 po ilalagay
Pwede mas ok din yung LG Choco battery
pag nag chacharge po bha yan tlgang isang ilaw lng sya d sya nagalaw galaw po?
isang ilaw lang sya pag nag charge.
@@JaypiTechPHOfficial panu po malalaman kpag full na po?ung akin po kasi kusang nawawala ung ilaw nya po..ibig po bha sbhin nun full na po ba sya?
@@ednajoy3258 in original JBL models, the charging indicator will turn off automatically.
@@JaypiTechPHOfficial sir pagnagcharge ba paano ba malalaman na nagchacharge ang jbl po
@@JaypiTechPHOfficial lodi bat yung sakin biglaan nalang bilis malobat kahit 100% pa
gusto nasa yung bagong tutorial or picture lang po kong asan yung positive at negative please kuya
Ak video battery vale jack broken ho gaye h
Puedo cambiar la bateria para que dure mas tiempo ???
You can change the battery from higher capacity but you can't add more batteries.
Note that this is fake JBL Charge 2 not the original one.
@Is That You Brownie? It depends on brand. Every brand may specific capacity. Check mo yung LG Choco na 18650
@Is That You Brownie? May epekto din pag higher amperes.
@Is That You Brownie? May masisirang electronic component.
@Is That You Brownie? Delikado kasing i overvoltage ang 18650 Battery. need mo talaga BMS
Anong amp po ung ginagamit ng JBL speakers Para Po mapagalaw lalo ung Passive Radiator?
Ang original na JBL Speakers ay ginagamitan ng TPA3118 IC.
In this clone na jbl, mababang uri ng Amplifier IC saka speaker ang gamit dyan.
Maraming salamat po
Ito po ba yun?
@@VtuberRex etong fake jbl yan yung tinutukoy ko sa isa ko pang comment. Abangan nyo din next yung original na JBL Charge 2.
sir pano pag wala ng makapitan ung charging pin, i mean wala na ung 5 lines dun sa board. pano kaya mapapagana? thanks god bless
need nyo po i trace ang linya ng charging circuit. kaso mas mahirap i connect bawat pin ng USB Charging Pin. need a big patience to fix
Boss nag uupgrade kaba ng fake jvl charge 4
Hindi ko sure kung may upgrades sya like speaker driver and all.
How to remove the ring in passive radiator
Use cutter knife and pry out carefully (for this speaker only)
For original JBL, there are screws inside the grills. Remove then unfastened the screws. Then the passive radiator of JBL Charge 2 has 4 screws inside the ring cover.
Is this fake speaker sir
Yes. 100% fake. There are original JBL Charge 2 teardowns all over youtube. You might check it out
@@JaypiTechPHOfficial sir actutully my brother purchased it i don't know from where he purchased but nowdays in this speaker the white cable inside the speakrr is damaged and i can not find the same wire in market can you give an alternate idea to connect the motherboard to the button plate
@@vinayrawat2781 try using thin wire to connect both ends. See if it works.
@@JaypiTechPHOfficial its very complicated to connect by this method anything diffrent to turn on this speaker
@@vinayrawat2781 i don't know exactly how to locate the power button. Because of the connection of ribbon cables, there is a supply for charging and power indicator. So the button pcb is needed.
good day, ask lang po sana ako kung paano po mapagalaw ang dalawang speaker sa gilid ? nag play ako ng BASS MUSIC tapos naka full volume lahat, di kasi sya gumagalaw . yung iba kasi gumagalaw eh hehehe, Bought from shoppee
mahina ang pwersa ng woofer mo kaya di gumagalaw ang Passive Radiator.
@@JaypiTechPHOfficial may tutorial ka po ?
@@JaypiTechPHOfficial di ko kasi alam eh hehehe paturo naman
@@familyval7026 check mo na lang sa yt. May pinapalitan sila para mapa bounce nila yung passive radiator.
@@familyval7026 bale ang gagawin mo is replace ng mas mataas na wattage na woofer pati yung amplifier kit.
Hair dryer for front removal
Ganda ng content mo , pero tanggalin mo background music. Lakas maka ulol
Hindi kasi pwede ASMR gagawin ko. Maingay environment ng workplace. Hope you understand.
Wrong info. You just need to twist yung bilog both ends magkabilaan.
Hindi ko gets anong bilog? Mark the timestamp pls.
Bhai ye wala part new dedo yrr
San po location nyo sir
Valenzuela
Paa yus po plssss
Boss pano ggawin ko sa bluetooth speaker ko ganyan din sya charge 2 ayaw mag off ng ilaw. Ty po sana mapansin nyo
probably may problem sa mainboard. check ribbon connections