Yamaha Blaster Oil Injection Block Off Plate Install
ฝัง
- เผยแพร่เมื่อ 21 ส.ค. 2024
- FULL HOW TO VIDEO ON INSTALLING THE OIL INJECTION BLOCK OFF PLATE ON YOUR 200CC YAMAHA BLASTER! We just got this Blaster a few weeks ago & wanted to use our own premix instead of adding oil in the tank.
- Music Credit:
• MusicbyAden - Dusk (Vl...
Awesome vid! So I'm going to get a blaster and I've never worked with them before. Do you think I should do this after I get it running? And what does it do anyway? What will i have to change if I do this? Thx😊
A good video but I wish you would have got down to the torriking and seen how much it was
What do you have to do to the wiring at the oil tank?
I put heat shrink at the ends to protect them
Have you got the link for the kit you brought?
Just got a Yamaha blaster recently with the oil injection block off on it how do you check your gear oil do you still have to fill it by the sight glass
Just drain it all out when the engine is hot and then measure out the amount that it says on the engine case (0.7L = 700 CC’s)
Page 5-6 in the manual, can download here:
www.manualslib.com/manual/659665/Yamaha-Blaster-Yfs200s.html?page=45#manual
@@acase11 sweet thank you answered my question right on 👍
Did you have to rejet your carb after putting the plug over the carb where the oil injection hose went? Some people say you have to
Never did. It’s rejected for the pipe but that about it
Let me ask a dumb question can you just block of lines? What if I hooked little line and big line together would it just recirculate ?🤔
The two coming out of block that is
You definitely can but I didn’t want to risk the gears breaking off inside the pump itself
Cant you just start running mix gas in it without doing the delete? Thanks
Wouldn’t recommend it
What brand skid plates do you have? And does the skid plate touch the frame or is there a gap in between?
Not sure on the skid plates. They completely touch the frame also. It might be OEM
I’m thinking about doing this to my blaster. Do you recommend doing it?
Deffinitly, eliminates having to use the oil jug. I run VP racing T2 or 110 & AMsoil at 30:1
Any chance you got a link to the kit you used? Thanks in advance.
Yup it’s on eBay throug Vitos
What oil did you use here?
Vermont Life AMsoil Dominator for all my 2 strokes
How much 2 stroke oil do you put on each liter of gas???someone
Pelon Michel I use this website www.csgnetwork.com/oilfuelcalc.html for a blaster you want to run 32:1
@@pelonmichel715 they make mixing cups that are 100% accurate. Only thing I use for my banshee, blaster, and kx250.