How to make throttle calibration for ZTW New Shark G2 ESC?

The Shark G2 series is ZTW New generation of 32-bit ESC for RC Boat, we have plenty of models from 20A to 100A to meet different applications, here is the video to show you how to make throttle calibration for ZTW New Shark G2 ESC? And here is the purchasing link of our official store on AliExpres, welcome to order, thanks for your attention.
www.aliexpress...

[@الفارسالمغوار-ح3ث]

how to calibrate the two-direction mode

[@terendaplaraku6061]

Bagaimana cara membeli nya ??

[@dmytro5428]

Good afternoon, please tell me there is a problem with 40a ESC, as soon as the voltage of the 3S battery drops below 11.2 volts, the boat cannot go at full acceleration, when you push it to the end, the boat just stops and you need to release the pedal again and start again and do not press to the end. Thank you.

[@RikoSeftianS]

we have the same problem

[@rexycontemplates]

You might need to program the esc with the help of the settings table paper instruction came with the package.

[@michaelinzitari]

So you need three hands to calibrate the ESC. Also you failed to mention you have to let go of the throttle 3 seconds after you hear the double beep. This is what it says in the manual. I had to change radio to get this to calibrate. Didn’t like cheap radio

[@thomassalin949]

Im trying to do this same procedure, but I don't hear any beeps from my motor!!? I have the 40A esc.

[@RikoSeftianS]

please help, we have the same problem