Dang BIG B, wish I had seen this video earlier, give a castle mamba pro away to a friend, fan just went out but still worked, lesson learned today for sure, keep up the awesome videos , BIG B
I want to try a different kind of water cooling conversion. Instead of fitting a cooling plate I was thinking to fit a flat aluminium plate and let it through the bottom of the hull and epoxy seal it so the water running under the boat cools it directly no scoop no hoses.
@@jamesatkinson7517 thank you so you think you could just modify like a hobbywing or spectrum and put it in a boat because i always have problems finding the right esc
@@LukasSchäfer-z7z I haven’t tried it again I have just fitted. Normal cooling plates to normal esc’s and improved the cooling on ones with bad design cooling plates
I’m looking to do this with a VXL-3S ESC but don’t wanna crack it open…what’s the best solution? I also heard the KV on the motors help with temps it’s going in a traxxas blast since I wanted to prove to traxxas that you can do brushless conversion. Any help is appreciated!
@@IRONCLADRCsmallest I found was 2mm the tube I have is exactly the same size as yours. I could drill but run the risk of ruining the fins. Are there methods of breaking the fins off with common hand tools?
@@IRONCLADRC can't find one for sale anywhere I really like the smaller boats my lake isn't very big and I appreciate the response I have learned a lot from your channel
I learn something every time I watch one of your videos! That looks great!!
Beautiful job. Looks mass produced!!!
Thanks Mike
Do you have a video using this mod setup on the water ?
Dang BIG B, wish I had seen this video earlier, give a castle mamba pro away to a friend, fan just went out but still worked, lesson learned today for sure, keep up the awesome videos , BIG B
Ouch, that's a bummer. But I'm sure he appreciated it!
Yes he did, he’s wanting make a “drag car/truck” so give my old Ofna SRT10 stuff too, can’t find that stuff anymore for bashing
I’m watching this with my wife a foot away. She asked “how many times did Big B say Nipple?” LOL
Nice workbig B!👌👍🤙
Awesome. It looks badass.
Nice DIY job, NICE !
yeah! that's looks clean!👌🏾😁
You so crafty Big B . Upcycler extraordinaire. BG4LIFE
Jack of all jack legs 😆
@@IRONCLADRC right, and master of none.
Veramente bravo
Bravissimo
Good looking mod! 👍
Onde eu acho um casco como este !?
I want to try a different kind of water cooling conversion. Instead of fitting a cooling plate I was thinking to fit a flat aluminium plate and let it through the bottom of the hull and epoxy seal it so the water running under the boat cools it directly no scoop no hoses.
Has it worked out?
@ not good on a rigger it’s not on the water would be awesome on a mono I the right spot if there was a flat section in the keel
@@jamesatkinson7517 thank you so you think you could just modify like a hobbywing or spectrum and put it in a boat because i always have problems finding the right esc
@@LukasSchäfer-z7z I haven’t tried it again I have just fitted. Normal cooling plates to normal esc’s and improved the cooling on ones with bad design cooling plates
@@jamesatkinson7517 ahh ok im sorry
Genius
Wow.. cool.
I’m looking to do this with a VXL-3S ESC but don’t wanna crack it open…what’s the best solution? I also heard the KV on the motors help with temps it’s going in a traxxas blast since I wanted to prove to traxxas that you can do brushless conversion. Any help is appreciated!
Simple way to cool that speed control is to run a couple small brass/aluminum tubes in between the cooling fins and zip tie them into place
@@IRONCLADRCsmallest I found was 2mm the tube I have is exactly the same size as yours. I could drill but run the risk of ruining the fins. Are there methods of breaking the fins off with common hand tools?
I have 2 car esc's with fan's on that are going idle. So hopefully your tinkering works, then im on it too. Going IRON CLAD. 😂
What boat is that
TFL SMALL BOLT
@@IRONCLADRC can't find one for sale anywhere I really like the smaller boats my lake isn't very big and I appreciate the response I have learned a lot from your channel
Like a fu**ing surgeon👌nice job!!
You do know that most of these (car) esc's are 2s rated (sometimes 3s)???
Nice job btw, some Tinker and Tune.
Theoretically is should work...
Nice mod.
567 locktite thread sealer. will seal liquids and doesn't harden.
We use it in the Industrial air compressor world daily!
Roger that thanks
I JUST EPOKSEED TWO COPPER TUBES ON ETHER SIDE OF THE ESC I WAS USEING . EVERYTHINGS A OK.
I just left the fan on it.
Si yo hago eso, se uema😂😂😂😅
I just run a high powered fan on my 8s esc. Motor is water cooled and gets hotter then the esc 😂
Just my opinion, Prop might be too big if the motor is getting hot, either diamer or to much pitch