VW Passat B8 - Unfolding mirrors when turning on the ignition

แชร์
ฝัง
  • เผยแพร่เมื่อ 18 ส.ค. 2020
  • Unfolding mirrors on ignition
    Depliere oglinzi la punerea contactului
    Apertura degli specchietti all'accensione
    Klappspiegel bei Zündung
    EN - Unfolding mirrors when turning on the ignition instead of unfolding when opening the car.
    After 5 minutes the mirrors will return to the initial configuration, they will unfold as soon as the car is opened. This is due to the fact that the car enters the "sleep" stage. The function can be useful if you forget something in the car, opening the car, the mirrors will not unfold and fold again, so the mirror motors will not "get tired".
    RO - Depliere oglinzi la punerea contactului in loc de depliere la deschidere masina.
    Dupa 5 minute oglinzile vor reveni la configurarea initiala, se vor deplia imediat ce va fi deschisa masina. Aceasta datorita faptului ca masina intra in stadiul de “adormire”. Functia poate fi utila daca uitati ceva in masina, deschizand masina, oglinzile nu se vor deplia si plia iar, astfel motorasele oglinzilor nu vor “obosi”.
    IT - Specchietti apribili quando si accende l'accensione invece di aprirli quando si apre l'auto.
    Dopo 5 minuti gli specchietti torneranno alla configurazione iniziale, si apriranno non appena l'auto verrà aperta. Ciò è dovuto al fatto che l'auto entra nella fase di "sonno". La funzione può essere utile se si dimentica qualcosa in macchina, aprendo l'auto gli specchietti non si apriranno e si piegheranno di nuovo, quindi i motori degli specchietti non si "stancheranno".
    DE - Spiegel beim Einschalten der Zündung ausklappen anstatt beim Öffnen des Fahrzeugs ausklappen.
    Nach 5 Minuten kehren die Spiegel zur ursprünglichen Konfiguration zurück und entfalten sich, sobald das Auto geöffnet wird. Dies liegt an der Tatsache, dass das Auto in die "Schlaf" -Stufe eintritt. Die Funktion kann nützlich sein, wenn Sie etwas im Auto vergessen, das Auto öffnen, die Spiegel sich nicht entfalten und wieder zusammenklappen, damit die Spiegelmotoren nicht "müde" werden.
    VCDS
    Select Control Module
    09 - Cent. Elect. (BCM / Body Control Module J519)
    Security Access - 16
    type key 31347
    Adaptation - 10
    Search:
    ENG 141635 / mirror functions
    ENG 126610 / Spiegelverstellung - Signalisierung_Spiegelanklappung
    Change value from:
    - active
    To:
    - not active
    Do it!
    Go Back
    Close Controller
    Test adaptation
    Warning: The changes have been tested by the author and work as described in the video. However, this video is for informational purposes only. If you do not have an original diagnostic tool and do not believe that you have the knowledge and ability to make these changes, we advise you not to "experiment". change something in the car. The responsibility is yours, and you do so at your own risk.
    For the changes in this video, a VCDS diagnostic tool, English version 20.4.1 was used
    Avertisment: modificările au fost testate de autor și funcționează așa cum este descris în videoclip. Cu toate acestea, acest videoclip este doar în scop informativ, dacă nu aveți un instrument de diagnoza original și nu credeți că aveți cunoștințele și capacitatea necesară pentru a face aceste schimbări, vă sfătuim să nu faceți „experimente”, informați-vă inainte de a modifica ceva la masina. Responsabilitatea este a dumneavoastră, și o faceți pe riscul vostru.
    Pentru modificările din acest videoclip, a fost folosit un instrument diagnoza VCDS, versiunea engleză 20.4.1
    Attenzione: le modifiche sono state testate dall'autore e funzionano come descritto nel video. Tuttavia, questo video è solo a scopo informativo. Se non disponi di uno strumento diagnostico originale e non ritieni di avere le conoscenze e le capacità per apportare queste modifiche, ti consigliamo di non "sperimentare". cambiare qualcosa in macchina. La responsabilità è tua e lo fai a tuo rischio.
    Per le modifiche in questo video, è stato utilizzato uno strumento diagnostico VCDS, versione inglese 20.4.1
    Warnung: Die Änderungen wurden vom Autor getestet und funktionieren wie im Video beschrieben. Dieses Video dient jedoch nur zu Informationszwecken. Wenn Sie kein Original-Diagnosewerkzeug haben und nicht glauben, dass Sie über das Wissen und die Fähigkeit verfügen, diese Änderungen vorzunehmen, raten wir Ihnen, nicht zu "experimentieren". etwas im Auto ändern. Die Verantwortung liegt bei Ihnen und Sie tun dies auf eigenes Risiko.
    Für die Änderungen in diesem Video wurde ein VCDS-Diagnosetool, englische Version 20.4.1, verwendet
    Music: www.bensound.com
  • ยานยนต์และพาหนะ

ความคิดเห็น • 19

  • @fabioebram153
    @fabioebram153 2 ปีที่แล้ว +1

    Você é genial! Muito obrigado 👏👏👏 I’m from Brazil!

  • @Mercedes-Mercedes
    @Mercedes-Mercedes 2 ปีที่แล้ว +1

    Спасибо большое

    • @RazecAutomotive
      @RazecAutomotive  2 ปีที่แล้ว

      Я рад, что был полезен.

  • @An0ris
    @An0ris 3 ปีที่แล้ว +2

    it will work unitll main bus can will go sleap, after that mirrors will unfold if open by remote key.

    • @RazecAutomotive
      @RazecAutomotive  3 ปีที่แล้ว +1

      You are right, it is also specified in the description. This function is useful if for example you closed the car and the mirrors or folded, and suppose you forget something in the car and you go back to take that something, the mirrors will not unfold. It is useless to stress the mirror motor at each opening-closing.

    • @DavidRain007
      @DavidRain007 2 ปีที่แล้ว

      Has anyone found a solution? Today I coded B8 Passat 2018. Mirror do not unfold when unlocking the car. But when it falls asleep, they unfold upon unlock.
      I have coded my Superb 3 in the samé way and mirrors do NOT unfold even when unlocking the car let's say after a week. There must be some other settings. Does it have something to do with firmware / hardware?

  • @DavideVTR1980
    @DavideVTR1980 3 ปีที่แล้ว +1

    Thanks for the video. And to close it is only with the button as before? Or do we have to keep push it?

    • @RazecAutomotive
      @RazecAutomotive  3 ปีที่แล้ว

      Hello! There are two possibilities, it closes when you close the car, by pressing the lock button, or if you have activated the comfort lock, they close if you hold down the lock button for a few extra seconds. ( th-cam.com/video/pP8QinI9Sw0/w-d-xo.html )
      In this video, the car have activated the confort mirror closing.

  • @shawtdusanshawt
    @shawtdusanshawt ปีที่แล้ว

    This is working for Passat 2020 after facelift only 1 time, then again only by keys.

  • @emreey_58
    @emreey_58 8 หลายเดือนก่อน

    passat b8 2015 comfotline work?

  • @nunotavares1574
    @nunotavares1574 3 ปีที่แล้ว +1

    Ola, qual a codificação que fez para ter os BIPS ao trancar e destrancar a viatura, Obrigado.

    • @RazecAutomotive
      @RazecAutomotive  2 ปีที่แล้ว

      Oi! Desculpe pela demora em responder. Vou fazer um vídeo com essa codificação. Mas para ter esse bip é necessário que o carro tenha um alarme OEM instalado ou se não houver alarme de fábrica, apenas a sirene de alarme pode ser instalada. Sem o alarme a sirene não buzina vai dar uma buzina curta. Você tem alarme na fábrica?

  • @petrisorV
    @petrisorV 3 ปีที่แล้ว

    Hi! I tried that, but now when I open the door, the mirrors unfold, than fold back. When I press the start button, they unfold again and stay like that. Have any idea what should be done?

    • @RazecAutomotive
      @RazecAutomotive  3 ปีที่แล้ว +1

      Sorry for the delay in answering. Did you do the coding exactly the same? What car model do you have?

    • @RazecAutomotive
      @RazecAutomotive  3 ปีที่แล้ว

      can you mail me ( vag.tweaks.retrofits@gmail.com ) an auto scan and an backup of controller 09 ( if you hav backup of all car, better) ? I'll take a look

    • @petrisorV
      @petrisorV 3 ปีที่แล้ว

      @@RazecAutomotive yes, I did it the same way. My car is a Golf 7 Highline 2014, I have been searching on google and found that at my model is something different, the computer I think, and won't work. Thank you for answering me.

    • @petrisorV
      @petrisorV 3 ปีที่แล้ว

      @@RazecAutomotive ok, I will send you later today

    • @andrasszetag818
      @andrasszetag818 2 ปีที่แล้ว

      @@petrisorV did you found solution? I have passat B8 and same situation like you. ( unfold, fold back, press the start button and unfold again)