How to make a Fast Cooling Freezing AC | How does work AC | Diy Air Conditioner
ฝัง
- เผยแพร่เมื่อ 1 เม.ย. 2024
- How to make AC ,how does work AC How to make a Fast Cooling Freezing AC , DIY Fast Freezing AC , Diy Air Conditioner , Mini powerful AC , Air conditioner At Home , Crafting an Icy Air Conditioner , Homemade AC Air Cooler
- แนวปฏิบัติและการใช้ชีวิต
I was just about to say this is bulls*i* until the end!😂
U are framing business now ops😂
What matters: the pressure difference.
1- Use a single engine.
2- Make the connection pipe thinner. Ex: use the needle. This will cause the pressure difference to increase. The second thing that will cause this is: The pressure that the engine can apply. You can achieve this by purchasing a higher power engine.
Result: Gas is trapped on one side. It gives out energy. On the other side, the gas expands. It receives energy from outside.
In your example: With 2 engines, you almost equalized the gas pressure on both sides.
Order:
1- Engine Output.
2- wide pipe. (part that will release heat - Heated part - High pressure area)
3- thin pipe. (transition that will create a pressure difference)
4- wide pipe. (Part that receives heat from outside - Cooling part - Low pressure area)
5 - Engine inlet.
لقد لاحظة ان جميع المقاطع لهذه الفكرة يخطؤون نفس الخطأ
وهو
عند حقن الغاز يجب تفريغ الهواء المتواجد في الانابيب
حتى يستحوذ الغاز على اغلب الفراغ في المواصير. وايضا ستكون الفائده اكبر بكثير
*_Yeah you're absolutely right, he should be self vacuum (if possible) or should vacuum by second pump before gas inserts/ fills. Else that will not work properly cause air in the pipe whole system. Ty-*
The principal is correct although a second pump between the expansion valve and the evaporator is abnormal, a pump there would be still pumping liquid coming out of the condenser.
The faults are the pump not being able to generate enough pressure, the hoses not being able to take the pressure and not evacuating the air/moisture out first along with proper sealing ports for evacuation and charging refrigerant. Then there is the proper capillary expansion valve sizing and getting the quantity of refrigerant right. ~40L/175H PSI ??? [Obviously the pump would have to be able to pump up to 300PSI with sufficient volume.]
Yes condensable flammable gas can be used as a refrigerant and propane has been used as a substitute for R-12. [Mexico that I know of]
Доктору Дью на проверку😂
Все работает. Вот только автор не говорит что пропан также является фреоном R290.
Дью выдохся....
Allways knew Jack Daniel’s was pretty cool 😎
Если бы всё так бы было просто -то китайцы завалили бы всех своими дешёвыми😂 кондерами-холодильниками
😂😂😂 ага ага
The pump is not good enough and the expansion tube is to short but the propane is a refrigerant is r290 ,
Thanks for the April fools.
Good job
And what do you think about the plastic zip Ty to seal the hose connection 😂😂😂
I mean, you could make a decent cooling system for cheap ... but using pumps never made sense.
The compressor is the only part you cant really avoid on closed loop phase change system.
Home made radiators and evaporators, work. Heat transfer to the bottle can be improved a lot by using a thin plastic bag, in a bucket full of alcohol. With the evaporator coil dipped in the alcohol.
As for refrigerant, if you filter it correctly lighter fluid (butane) will work fine for close to 0C temperatures.
i like the way that water droplets form on the copper pipes and then turn to frost. And also how the frost is only forming on the pipes at the front of the bottle, but not all the way around.
Its like a regular can of compressed gasses was sprayed only on the front part to form frost and then thawed, and then the video was played in reverse
You got it!
He himself told at end of the video that its fake
Thanks
من یک مهندس مکانیک با گرایش حرارت وبرودت هستم.این سیکل به درستی طراحی شده وفقط تنها مشکلش شاید انتخاب کمپرسور باشد که در طولانی مدت به معیوب شود.درکل از زحمات شما جهت ساخت ویدئو تشکر میکنم❤❤❤
خودش اخرش گفت فیک هست و جواب نمیده
Engenheiro? 😂😂😂😂 Coitados dos teus clientes..
حس میکنم اگه لوله های فن رو بیشتر میکرد کار میکرد چون طرف دیگش لوله خیلی زیاد بود ولی اونجایی که گاز باید حرارتش رو از دست میداد خیلی کم بود و فرصتش رو نداشت@@memoli82
پیشنهاد شما چیه؟
Que invento mas estupendo, gracias por compartir tu proyecto
I did not know that Jack Daniel's can do
cooling. Usually always on the contrary 😂
Before filling butane gas into the system, try vacuuming the system with the air compressor you use and removing all the oxygen from it and filling it with butane. Make sure you install the air compressor in the right direction. The air outlet should go to the capillary tube.
The circulation air must inside condition, in closing rooms area to needs more cold
You did a good job! Keep going until you'll be a millionaire one day!!!
Refrigeration principles already working hundred of years and so many Companies Produce all kind Fridge and Air Condition systems , the could be high school Science Project to show heating and cooling principles .
@@albundy3696yeah but it’s cute. Looks like something nice to have in the desert for a little bit
Just gave a lady friend a breather who for years smoked cigarettes and now regrets it. It would have been nicer to cool the air for better freshness. Especially with those hot summer months. Thinking like an astronaut!!!
Next time just get a small fractional horse compressor and do the same thing. 😂 Maybe even in a small container. That would be awesome mini chiller
Good idea!
co2 works fine :-)
Kde koupim napln dekuji za odkaz.
How many BTUs does the machine produce?
Would you need higher compression than that?
Yeah, that's why he says it's fake at the end.
Thanks!
YES! Because using a flammable gas as a refrigerant is a GREAT idea!!
R-290 (Class A3), R-152a (Class A2), and R-32 (Class A2L) also flammable coolant gas used by heat pump - tumble dryer, refrigerator, etc. BUT can you watch last 30 sec?
Did you know that Ammonia was one of the first refrigerants used? Propane as well can be used , co2 as well
I think you must use more pipe on fan side it is so less on the oter side
At room temperature buthane pressure is 2.5 bar. The small pump will not be able to turn against such pressure. Also the plastic tubes vonnections leak. Situation changes if you are outside on a cold day. If temperature is 0 degrees centigrade then buthane pressure is 1 bar. So it is at atmospheric pressure. May be it will work then. Or it will whork while there is a cold spot in the system below 0C.
Hi not vacuuming sistem. More part there nitrogen.
The problem is your PUMP this pumps has diaphragm system it’s just can be used for liquids,if a gas or air bubble stuck in diaphragm the pump no more push’s the liquid ,you hear the sound of pump working but it’s not working actually ,the best pump can be works in this system is piston vacuum pumps
I can't believe I sat through 8 minutes of this shitty music for a delayed April fool's prank...
what type of pump are you using . is it a mini compressor or a water pump? Can i 3d print one and use a motor?
Bombinha de água de 20 litros elétrica
is this plastic pipe safe for this freon gas?
Nope. I believe he used butane, but neither would hold.
links for parts ???? Please
Viola las leyes debla termodinámica. Y el vacío brilla por su ausencia 😅
Ok so my two cents is that bottl is isobutane not propane like someone else said. Similar but different. R290 to r600
Induction heat can be used in absorption refrigeration, without compressor
CQFD 🎉 UN BON AGREGA C VAS REVENIR EN FORCE ET ENVOITURE PILE POILE 😊Je pense donc……..
Wouldnt bother gluing the Batteries down with how fast your gonna burn through them.. I Doubt you get 2 hours out of both..
JACK DANEAL SPONSORED THE EMPTY BOTTLE
Most people in the trades work on repairs of commercial equipment every day. So alot of people know about this ? We just don't have time to make videos mostly and you might get hurt ( you know boom) explosive and very flammable
The viability of this contraption not withstanding, one bad thing about it is that the perishable power supply is glued down
Jack Daniel will die from laughing.😂
spot on
Just learn what is "conservation of energy" and you must know.😅
Сколько пальцами по трубкам водить надо, чтоб начало охлаждать?
Капризный аппарат , без ласки работать не будет!😂
How do you close the injection hole in the pipe?
Glue .
How did you seal the injection point ??
He don't, because it's fake.
as long as the needle is still inserted its sealed... only need to seal if you remove needle... but really leaving the needle in would be a nice way to provide a service port to add "freon" as needed.... this type system would be leaky I think and require freon every so often. InventPeaceNotWar * Look you can take a bicycle pump and get cooler air out the output hose when the more dense pressurized air expands back to normal ambient psi, notice the end /bottom off pump gets warm/hot....---> so a person could" conceivably make a light low capability ac that would at least cool the air using your lil lbrother (3cent / hour) outside to do the sweaty pumping, LOL.. just kidding... Hey its cheap, only 2 parts, bike pump and lil brother, LOL
@@InventPeace1 Your video shows otherwise.
How did you pull a vacuum ??
Make a real working one like this but with a small 12v bldc compressor and make it usable.
antigamente as geladeira na região onde eu vim era com gás de cozinha.
Condenser is to small and no good disapation of heat
do you sell assembed one?
No, because it's fake.
Bro He says its fake at last of the video
Зачем обманывать людей?
I think it was an April fool's joke.
но это не обман, просто он сделал не правильно, я бы использовал капиллярную трубку тоньше и она должна немного заходить в большую, а насос можно попробовать перистальтический и еще не ясно как он загерметизировал дыру от шприца...
Sorry thanks for wasting my time I realized as soon as he no compressio even though the gas would have worked except for injecting it.
Liked the music.
Which gas you added?
It's usually butane in these videos, but this doesn't work. It is fake.
Lo único bueno de este video es el doblador de tubos😂😂😂😂
what type of gas ?
Sure it's like freon gas
Mulțumim!
Effet Peltier
That's NOT an expansion valve. That MIGHT be considered a "metering device". There is a HUGE difference
It's called a capillary tube and functions as a metering device.
Capillary / metering device installed at the discharge port 🤣🤣🤣
Jay jagannath
Kansa gas apne Dale.
Don't you dare. This man will invent a mini space x
I want all the bottle frozen not just the front LOL
Thank you
@@ONLYAFEWPEOPLEKNOW⚠️ God has said in the Quran:
🔵 { O mankind, worship your Lord, who created you and those before you, that you may become righteous - ( 2:21 )
🔴 [He] who made for you the earth a bed [spread out] and the sky a ceiling and sent down from the sky, rain and brought forth thereby fruits as provision for you. So do not attribute to Allah equals while you know [that there is nothing similar to Him]. ( 2:22 )
🔵 And if you are in doubt about what We have sent down upon Our Servant [Muhammad], then produce a surah the like thereof and call upon your witnesses other than Allah, if you should be truthful. ( 2:23 )
🔴 But if you do not - and you will never be able to - then fear the Fire, whose fuel is men and stones, prepared for the disbelievers.( 2:24 )
🔵 And give good tidings to those who believe and do righteous deeds that they will have gardens [in Paradise] beneath which rivers flow. Whenever they are provided with a provision of fruit therefrom, they will say, "This is what we were provided with before." And it is given to them in likeness. And they will have therein purified spouses, and they will abide therein eternally. ( 2:25 )
⚠️ Quran
Бляха, эта помпочка на 12 вольт не вытянет делать давление 4 Бар. Херня полная. Идея стара как любой холодильник и предельно понятна, но реализация на помпочке с 9 вольтовой батарейкой и патрубками от капельницы работать не будет. Не выдержит давления патрубок пластиковый/резиновый и такой моторчик не сможет создать нужное давление.
Если бы я не был рефмехаником поверил бы
А в чем подвох тут? Слабые моторчики?
@@oleggomolskiy1497 фреон это самая текучая смесь найдет любую щель чтоб вытечь поэтому систему спаивают, а у него трубки резиновые на хомутах это первое, а второе моторчик должен быть гермитичен. Плюс только в том что это обычный газ пропан а не фреон, короче игрушка на пару дней и еще надо расчитать капилярку чтобы вся эта хрень заработала. Не грамотный человек изучается и плюнет
Для тих хто до школи не ходив.
First, I liked it and clicked subscribe
Why would you waste everybody's time with that? How long did you spend thinking that up and making a project that doesn't work? Show us something that DOES work, unless you don't know anything, but judging by the fact that you use knipex, I'm sure you know about electricity.
Fake. El Isobutano es un gas refrigerante conocido como R600 o F600 para los franceses que lo llaman Freon.
Ye sirf 5 minutes work karta he fir ges khatam😂😂
Wird nie mals funktionieren
hi hi hi
nice joke, thank you
Sir please use air compressor at the place of water pump
Не жуйте сопли это было 20 лет назад
Мммм, шляпа😊
Это шляпа! Да судя по всему он охладит трубки, только при заполнении. Для газа нужен компрессор. По технологии почти правильно, но нужно вынести блок радиатора вне помещения, а испаритель оставить внутри. Есть видео где на элементах пельтье чувак сделал кондер. И он реально работает. Ибо теплую энергию переносит с помещения а холодную внутрь. Но эффекта как вентилятор. Помпа с газом работать никогда не будет!!! Хорош уже просмотры себе чушью зарабатывать! Кондиционер это простое устройство. И работает как обычный холодильник! Но при его работе из его камеры охлаждения для холода газ превращается из жидкого в парообразное состояние. Потрогайте радиатор задний! Он горячий тем самым что бы создать холод, надо изместить тепло. Холодильник отдает его в квартиру. А кондиционер на улицу. Вот эта вертушка должна стоять на улице. А испаритель в комнате. И обдуваться другим куллером. Направленным на комнату. И заменить помпу на компрессор. Плюс в этой монтажной схеме нет кондецатора и заправляющей горловины там за место шприца ставится кран. Ибо даже из этой установки газ испарится. И по правильному надо закачивать фрион. Он очень текуч. А так вам навешали лапшу на уши. И на глаза накидали неприличные вещи. Не будьте наивными.
Там в конце написано, что это шляпа
Ок. Но почему нельзя сделать эту схему с маленьким, но с более мощным компрессором? И охлаждать свое личное пространство, нагревая другой угол комнаты или аккумулировать тепло в изолированный брусок меди...например. В конце концов делали же аммиачные холодильники без компрессоров, и они охлаждали...
come buttare un pò di rame nel cesso
No funciona eso
This is fake, Without compressor not work with, 12 volt pump for copper pipe.
It's real
่
Fake.... Mini Air compressor use pressure rubber valves never withstand gas high pressure. I've tried it and explodes.
É que vc fez errado
It's not a fake it's a real
Жаль конечно этого добряка
Watch the video till end first
Complete fake BS. I'm surprised that people in the comments professing to be engineers do not call this out!
Dangerous...
I immediately read the comments column, and it turns out my thoughts are the same as many people.
What a great fake 😂
Is this a 9 volt battery? Are you serious? Well, it's definitely fake. At least for the sake of decency, connect this to a laptop battery.
Watch end of the video
Мается от безделья хренью.....!
Fake video gerçekte o pompa su pompası gazı çekmez ve iteklemez.
Even if that actually worked the price of 9v batteries these days is ridiculous
Even this is fake.
You are 1st grade fail student
Again a video about democracy...
Fake 😂😂😂
Fake
100% fake
Bs fake.
😂
waisted my time I will block you now.
Did you just wasted our time with a fake video? Ban. TH-cam should ban those kind of videos and acc
Stupid Project
Bullshit
Can't stand the Piano Music... Bye
Stupid Project