Convert speaker wire to AUX
ฝัง
- เผยแพร่เมื่อ 20 ก.พ. 2016
- This video shows how to convert regular speaker wire to AUX. Remember watts and amps when using this method. This is just how to show how to splice the two wires. If you have improper power going into the speaker you cannot power the speaker. For louder sound you need an amp, like i did in this video: • How to make a powered ...
Here is a good small speaker: amzn.to/2xXg1iv
Here is some good speaker wire: amzn.to/2fQWQk5
Here are some wire splitters: amzn.to/2yGArKg
Here is a great AUX cord: amzn.to/2kkMA55
Support the channel through my Patreon: / jrobling
Check out Merch on Amazon: www.amazon.com/shop/jrobling
or Teespring: teespring.com/stores/jrobling
Follow me on Twitter, Instagram, and Facebook
/ mrrobling
/ mrrobling
/ mrrobling
Check out every product that I review or I recommend in my videos here on amazon: www.amazon.com/shop/jrobling
My Gear:
Camera: amzn.to/36jsHBz
Phone: amzn.to/3oN0soe
Lens: amzn.to/3fXb9hT
Light kit: amzn.to/33q4zv4
LED lights: amzn.to/37kHsTV
Sound proofing: amzn.to/36eXvmK
Tripod: amzn.to/2J9txIp
Mini Tripod: amzn.to/3mjlSWa
Shotgun Mic: amzn.to/3qbL0jJ
Lav mic: amzn.to/3qbOB1i
Keywords: how to convert regular speaker wire to AUX auxiliary cable left negative positive red copper blue black not working shell case casing
#howto #diy #wiring - แนวปฏิบัติและการใช้ชีวิต
One way you could also do it is taking an RCA to AUX cord and cutting the RCA tips and doing it that way. It's what I did and it works gorgeously.
The RCA to AUX cords are super duper cheap too.
Thank you sir! no one is actually describing this in such detail, you're the only video I found so far that actually shows the wiring process and doesn't just want me to hear how good it sounds on their end. thank you very much🙏🏼
dear guy! thanks for the video... mind you there are millions of other videos... BUT YOURS was the one that made me do this... and trust me, i've been dying without music... but now i have it :D I took an AUX cord, and that cord with the VIDEO AUDIO *red, yellow, white* cord... and made use with it... I've never been so excited about electricity ...THANK YOU THANK YOU THANK YOU. Music is back in my home
and thisis how i spent my childhood. taking thingsapart and trial and error lol
Me too, but I didn't have these kind of things to mess around with
Extremely helpful, thank you!
You are so helpfull looked forever for a video like this u are amazing thank you
Bro, thank you ALOT. It helped me find another perspective in electronics while being 13, it helped alor i powered up a speaker of Sony it was the rear left channel for HCD-VX8 system unfortunately rhe HCD-VX8 itself is missing and I've got all the other 5 channels/speakers still but it was truely a blast powering it, i could not thank you enough for helping me learn my first step in the music field
Thanks for this! Just got my new AV Receiver to accept my old sub woofer!
Super bro.....Great....When i plugged in the next second it started to play alod...SUPER ...THANKS.
Thanks! Great video. Have now what to do with the old speaker system
Fuxk yes thanks
What if you have more then three wires how can I tell from - and + ones I know the grounds but I just don't
know how to find the - and + but there are more
That means if I try to Tap red and black wire on my Bluetooth speaker to a 3.5 mm jack then it Can use to an Auxiliary mode. Especially on Mic port on any Radio. ?
here to show my appreciation thanks for pointing me in the right direction
Can someone explain how to connect the wires for the left and right configuration? I can't find it anywhere.
Thanks for video . But will a mobile or pc 3.5 mm jack support such a big speaker power?
Can you link the other video you mentioned? Power for input and output? Thank you!
Hi, my AUX cable has a white, greeny-blue and a red cord. Which is which?
nice work thank you
I'm converting my speaker here but I've uncounted something called "TX05AUD" and I wanna add power to it but I'm just not sure which wires I should connect to for that
So basically you will be getting a mono audio with no left and right channels or you still be stereo from them?
Hi ,I have aux that four wire one copper,red ,blue and green , I want connect with my speaker so please advice how to set
what if i use just aux connect to the input audio and phone?
Omg I was haveing a short now I know why😣 thank you
Hey, The red is Right positive, the blue is Left positive and the copper is the negative or ground for both. That type of aux or audio jack cable is a stereo type (left and right).
Yes he doesn't know what he doesn't know. Typical Kruger Dunning effect teaching wrong stuff.
@@fromtheflightdeck252 There's no need to be an asshole, he actually explains this in a text box in the video. So who is it that doesn't know what they don't know?
Would my green be my ground?
What color are your wires if it's red yellowish and green then green is left and red is right and the yellowish one is your ground, join the ground and green/left channel you've got yourself a mono channel
If I have a speaker with 2 wires(grey and black) can I connect those to an aux output and connect it to my phone/laptop without harm??. Also the grey is positive and black is negative, right ??
I have an amplified PA horn that has a positive and negative wire. Is there any way I can convert it to Aux to hook up to my cb wile still running the wire to the battery to amplify it?
I have a Radio that has an INPUT jack, can I change it to output?? So I can hear the sound on external speakers
What if i have 4 car speakers to put in garage, then use the aux cable to use with iphone. Is it the same principle? So i would have 2 sets of wires, instead of 1: left 2 speakers and right 2 speakers....how would i wire that?
how do i connect more power ?
Needed to connect a (Aux Cord only Subwoofer) to a wired stero system and Thanks to this, My Sound Is Krystal
kaylen cyprian you will need an amplifer for that.
Thank you this is a good thing to know and thank you vary much
+1q
Hey! I have a pair of pod speakers that are unamplified speakers (just has the red and black "screw in" inputs in the back). And i want to connect them somehow to my new imac retina 5k model.. Do you know if its possible in any way? Im really lost about this so could really use your help
hey my jack has a ground wire but my speaker doesnt, where do i connect it?
Thanks got it working for my speaker.
Can i do this moment in speaker car to aux to connect to pc
i have yamaha rx-V481 and i try this system what you showing , and not start work thatway!?
This possible to connect the speaker wire to 1/4 jack rather than the aux?
Very helpful. What if you want to hook up to two speakers?
Theres a headphone splitter that no one really buys that can possible serve purpose for this. Cheap too. You just need to make a second cable
Well but one of my speaker have only red and black wire, but no wire for power source. What should I do ?
I got the red and black positive and negative, I'm doing it to hook up to a portable radio in the shed.
i have 4 wire blue red yellow and white what color is the positive and negative
It’s works! Thanks man
There is no any other external power supply in my speaker, whether it would work properly??? Plz help guys
so did this above actually work or nah? like did you try your phone on it and it worked or nah?
Thanks heaps, works great
Can i do to on a cable with 3 black lines?
I have a blue and red and copper connected to were you said to connect to right but I have a extra wire which is green where do I connect it too the positive or negative?
Neither its a microphone wire
Hi,
I am trying to find a circuit diagram/parts for adding a 3.5mm headphone jack to an alarm clock radio that does not come with such a jack.
Do you have a video tutorial oh how to cheive that, please?
Greatly appreciated.
Does it have a built in wire already for media use? If so what I would do is just cut the wire right in the middle and check for the colors / ground and match them up in a sliced aux cord
thanks man you rock! Now to hook my phone up in my old truck.
Set up external speakers Samsung large screen tv
how will power go to such speaker
i m having 4 wires blu ,green,yellow & red how to connect it
If I want to use two speakers how would I configure the wires? could I just attach the speakers' wires together (positive with positive, negative with negative) and then do the same thing?
oh now that I think about it that wouldn't work. How would I do this?
I hv red,blue nd copper,green wires...hw cn I determine positive nd neg ??nd connect to speaker?plzz rply
Worked for me no problem but the sound was low so reading the comments I need a amplifier. So I"lol try that. Good speakers that I hate to just throw away
Yeah, this is not a real solution without an amplifier sitting in the middle of that connection. Basically, all he is doing is taking 5 mins to show you how to twist a few wires together.
Thanks heaps subbed
That intro goes so hard
that shit almost killed me
*BUM BUM BUM BUM BUM BUM BUM BUM!!!!!!*
ʰⁱ ˢᵒ ⁱⁿ ᵗʰⁱˢ ᵛⁱᵈᵉᵒ
Does this work for a 5w speaker?
j Robling my aux corde is red white and coper wat i do ???
im trying to follow this tutorial fo r a different reason does anyone know how to connect a tv speaker to a pc with no usb on speaker also speaker has no aux just a couple of wires black and red leading up to a werd red plastic piece
I have white red and yellow which one is positive and negative somebody plz answer
Can I connect earphones wires
my speaker seems big and so my output from mobile can't work the speaker what should i do? plz help
Can you please tell me how to hook computer speakers to a lap top the end of the 2 speakers have been cut were u plug it into a lap top the cords are red white and silver guess that one is the ground wire what kind of end can I put on it so I can use them with my laptop on the front of the 2 speakers there is a place to put a head set and a place that says Auto in there a hole there to but I don't have the end to the cord speaker cord what can I d0
I did the same but sound is very low, I think my phone can't give required output for the speaker.
How can i do it if my speakers Havre red black and blue and grey
Guys!! This works...its true ...like it
so do u burn all the wires?
Great but only for mono right?
Very helpful
What is it mean 'extra power running tghrouh it'??
How do you amplify it without an amplifier
Could I use some old headphone wire with an audio jack for this? I don't want to cut it for not reason
max_of_awesome yes, positive and negative are the same wire, it only matters what it's connected to
awesome thanks for the vid
Nice now I can add some speakers to my model cars
I make a bluetooth speaker but when I connect my speaker wire in module it doing pak pak pak can u help me ?
thx bro its work!! ohh yeahh
will it still sound if my speaker doesn't have an on/off swtch?
Yeah that's a good question I having that issue right now
can i use my ear phones instead of the aux like can i cut the earphones so i can use it as aux?
yes
Does it make your speaker louder?
THANK YOU
How i connect speaker with the use of red and white slot in pc
same!
Thx it worked you got a sub from me
i have a right and a left speaker, when connecting one in a time they work, but when connecting them together, only the right speaker works. PLEASE HELP
I did this and as soon as i plugged it into the wall the sub started going crazy loud and my phone was connected to the aux and it completely killed my phone and idk how to fix it (mainly the phone if anyone knows how to fix that problem).
What about a beaded aux cord , only 2 wires inside
can you please tell how to Power the speaker beacuse this way doesn't work for my speaker
How to connect double speaker??
Your works are appreciated👍👍
Can I connect with usb cable ? ?
how do I do it with 2 speakers u mentioned that u have to connect it different
if you join both the positives then both the negatives, making two wires out of four, then connect
J Robling hey man can u please do that kind of video becuase i dont know how wire two or more speakers together. mine has a aux allready comming out of one of the speaker and the othet one has has thing as ur speaker.
how to wire them up and have one aux coming out of both speaker.
Taranveer Sihra I'm pretty sure he's talking about turning two speakers into series? Or parallel. Just look up how to put speakers in series, if that doesn't work, do it in parallel.
how do u turn the volume up
if my speaker just have red and black wire . can i connect it ?
yes, The red is the positive and the black is the negative
+J Robling im going to try this tomorrow, i got 4 speakers they are connected in pairs of 2 and 2 one of The pair got one black wire and ones red onsdag the other one both wires are black. they are not in a box, they are just speakers fully functional not wired to anything but their partner(s) do you have anything to add to my "experiment"
how can i connect two speakers at the same time
How can you boost sound
Do you have to solder or can you just wrap the chords around each other???
You can wrap them around and then cover them with tape but the solder is far more reliable and ensures the connection wont be lost. If the wires become unwrapped you will have to rip open the wire and do everything again.
You:some speraker from a radio set
Me : Hi-Fi Speaker
I also did the radio thing.
you think it works with any speaker and any aux Cord?
not every speaker the best is a small speaker and low wattage
it sounds not loud a normal phone speaker plays louder
It is working but,left spekear not working
Canu explain why it is that pls reply fast
what if tjers a red blu and yello
Need help dude if i had 2 cooper wire and 1 red with 1 blue how can i connect it beacuse theres 2 not 1 im so connfused right now
OOF NVM THE 2 COPER IS WILL GO TO WHITW THE OTHER ONE TO RED.
I am not good at anything that equals electronics. I have some old sony speakers from a surround sound. Is there any way to convert them into auxiliary or Bluetooth speaker's. I watched this videos but I still don't get it. Thanks no sense at all, plus I'm colored blind.