2021 Honda Accord radar detector hardwire mirror tap

แชร์
ฝัง
  • เผยแพร่เมื่อ 1 ธ.ค. 2024

ความคิดเห็น • 27

  • @richardpbenaidrene6458
    @richardpbenaidrene6458 11 หลายเดือนก่อน +3

    I used to have a 2021 the exact car 2.0 touring
    Loved it .
    Got a hybrid touring
    I just installed my uniden R8
    The red wire goes to the brown wire
    The black to black obviously
    I originally connected the red wire to the pink iesh wire that wire is a Constant on wire then my rader wouldn’t turn off .
    If I did it anyone can
    Also you need to use super thin wires
    Very easy
    Now I have a wireless radar
    Much better looking .

  • @jonathanvictor9302
    @jonathanvictor9302 ปีที่แล้ว +1

    Appreciate the video. Came across this looking for ways to hardwire a dash cam.

  • @larryalboher7448
    @larryalboher7448 ปีที่แล้ว +4

    Thanks! It would have been much more helpful if you actually showed the removal of the cover and exposed the wiring harness, A picture is always worth a thousand words! How is your detector mounted at the top of the windshield? Is it on a suction cup or what?

  • @basilkhoury7970
    @basilkhoury7970 3 ปีที่แล้ว +2

    Thank you man! Saved me so much time!

  • @mysterjd34
    @mysterjd34 ปีที่แล้ว +1

    Great video! Any details on the mount itself that allowed you to stick it so close to the headliner?

    • @mrut4911
      @mrut4911 ปีที่แล้ว

      It is the small double suction cup mount that came with the Uniden R7 / R8. It was easier to mount it close to the headliner although it does limit me from being able to fold the sun visor down further than 90 degrees

  • @cowboys2473
    @cowboys2473 2 ปีที่แล้ว +1

    On my 2020 touring the power wire is the RED wire. Just in case those with 2020 needed to know why the brown wire does not give power during startups.

  • @TheRoyalGuardian
    @TheRoyalGuardian 3 ปีที่แล้ว +2

    The sequel to the 2011 Honda Accord video.. One decade later

    • @Ezra-wm5dk
      @Ezra-wm5dk 2 ปีที่แล้ว

      Where can I find the correct terminals for a 2010 accord

  • @xavierscott8275
    @xavierscott8275 ปีที่แล้ว

    Where does your screwdriver or your tool to pop it loose? Where do you stick it between a headliner in the mirror or at the base of the mirror? The plastic piece

    • @markrutledge9897
      @markrutledge9897  ปีที่แล้ว +1

      You don't have to use a screwdriver to pop the cover loost. Just squeeze it from the bottom of the cover and then lift up toward the headliner and away from the windshield.

  • @sairangineeni
    @sairangineeni 6 วันที่ผ่านมา

    I have a 2018 crv ex, Can i tap into the honda sensing for power?

    • @mrut4911
      @mrut4911 6 วันที่ผ่านมา

      sorry I am not familiar with that vehicle's wiring.

  • @terijohnson514
    @terijohnson514 2 ปีที่แล้ว +1

    May I ask why you mounted where you did instead of below the mirror? Less obstruction for your view?

    • @mrut4911
      @mrut4911 2 ปีที่แล้ว

      Hi Teri - couple of reasons, I like it up high so it isn't in my view, also when I park I can easily fold down my sun visor and it helps hide the detector from easy view.

  • @jarrodevans9406
    @jarrodevans9406 2 ปีที่แล้ว

    I have a 2022 accord hybrid sport I don’t have a brown wire any help ? I have pictures I just don’t know how to upload on here ?

    • @markrutledge9897
      @markrutledge9897  2 ปีที่แล้ว

      Hey Jarrod my power wire switched was brown and I found that detail on another forum online. Sorry you might have luck if you search hybrid Accord. My is also a touring model not sure if that matters but it does have the rain sensor for the automatic wipers behind that same plastic cover.

  • @azizmohammed3977
    @azizmohammed3977 2 ปีที่แล้ว

    Hey,will this work on the 2022 honjda Accord sport 1.5 ?
    and i want to put it right by the rear view mirror under it lke most people do. what do you think>?

  • @shanel7427
    @shanel7427 ปีที่แล้ว

    Where’d you by the hardwire kit ?

    • @markrutledge9897
      @markrutledge9897  ปีที่แล้ว

      Amazon is where I purchased the hardwire kit.

  • @SkyeHack
    @SkyeHack ปีที่แล้ว

    Are you using the stock suction cup mount?

    • @mrut4911
      @mrut4911 ปีที่แล้ว +2

      Yes it’s the suction cup mount that came with the Uniden R7

    • @SkyeHack
      @SkyeHack ปีที่แล้ว

      @@mrut4911 thank you man

  • @verynick
    @verynick 2 ปีที่แล้ว

    Is there part 2 where you actually take the cover out lol

    • @markrutledge9897
      @markrutledge9897  2 ปีที่แล้ว

      Lol no i didn't think about the video until after i did the install. Taking the cover off is easier than i thought when you just gently squeeze up from the bottom of the cover toward the roof. The wiring harness I describe is easy to spot

    • @verynick
      @verynick 2 ปีที่แล้ว

      @@markrutledge9897 haha all good. It wasn’t as hard as I thought