A6 C6 Tow bar installation including wiring and coding
ฝัง
- เผยแพร่เมื่อ 5 ส.ค. 2024
- How to fit and install a tow bar (westfalia) onto an A6 C6 Avant (same process for the saloon). Also included is how to fit a dedicated wiring kit and how to code in trailer module with VCDS.
_______________________________________________________________________________________________
Follow me on Instagram ► / abimoto1
Facebook ► www. Abimoto-1889377874...
_______________________________________________________________________________________________
Intro & Outro:
I'm Sorry(HIP HOP BEAT 2018) (FREE VLOG MUSIC) by Freddie Cakez is licensed under:
creativecommons.org/licenses/... - ยานยนต์และพาหนะ
Thanks mate, legendary, helped heaps with coding in the towbar on a Q3. I'm doing the job tomorrow, let you know how I go 👍
Cheers bud, glad it was helpful 👍
@@ABIMOTO I did that 8U Q3 today and boy what a mission, the harness has to run all the way to the fuse box and bcm under steering wheel, be connected in etc. With the coding I followed a very similar method to you, except in the 69 trailer coding I went country code then all 00's otherwise I got a "Check towing bracket" fault on the dash. The module still works if you select 00 or no coding in the tow module.
Sounds like you had more fun than I did 👍. Definitely worth it when it all works in the end.
Excellent simplified explanation Abi. Hopefully it will resolve my poor understanding and get my coding completed successfully.
Amazing video. Clear and helpful
Cheers, glad it was useful
Excellent video 👍👍👍
thanks for sharing man
That is great. Thank you bro
Glad it was helpful
Good video thank you. should i connect the tow cable for changing 69-trail screen?
God bless you
Hi great video. I fitted one to my car years ago but could get anyone to code the car. I was wondering do you not have to do anything to the engine management system. which notifies the engine that the car will be pulling something which changes the performance of the engine for cooling.
Could this be done via a Carly OBD system? if anyone as done it can you point me in the direction to that.
Can you help me? with te amarok 2014 westfalia module. Doesn’t work correctly, I have difficult to code with my vcds 15.7 please
Hi there, what exactly is the problem
Excellent explanation. What if after doing all this front assist remains unavailable? Any clue?
Hello, how to connect 13pin original wiring harness on a4 b8
Great video. Are the reversing sensors only disabled when hooked up to a trailer? Or permanently disabled when the tow bar is on? Thanks Dan
The reverse sensors are only disabled when hooked up to the trailer.
Can you tell me the part number of the 2 screw nut what you attach to the chassis?
Sorry I don't have the part numbers as they came the tow bar kit
I have a problem to move the sidetrims at 1:34 could you explain exactly what i need to do
Hi was wondering if you can let me know where you get that tow bar from. I have a 2007 a6 sedan.Thanks
Hi there. I got mine from PF Jones 👍
Easy with out taking the exhaust done completely just drop the hangers and you can get your hand in there
Yeah I tried that but in the end I just found it easier to drop the exhaust out of the way.
hi , how do you de pin that comfort control module, do you need a special tool, thanks
Hi there. These a little tab on the connector block. You just need to push it down with a small flat head screwdriver and then the wire will pull out of the connector block. Hope that makes sense
@@clutchkickit6730 thank you
How did you do the calculations for the abs break code ??
Using the help function on vagcom it will tell you what number needs to be deducted from your existing code if you are now adding a control unit.
does the trailer blinker light only flash when a trailer or caravan is hooked up or is it on all the time ?
Only when the trailer is hooked up 👍
@@ABIMOTO cheers I am also having an issue with getting the fog lights to work. I have one of these test gadgets that you stick in the back of the 7 pin socket and all lights work apart from the fog light. I've read online that when the car is in tow mode it automatically switches off it's fog lights and just sends power to the trailer. Do you know if this works with this test device plugged in or do I need to try it on an actual trailer / caravan ?
Yes you need to try it with the trailer or caravan connected. I'm sure the cars rear fog light is disabled when hooked up to stop glare.
@@ABIMOTO Thanks
what is the reference of the red connection harness that goes to the control unit???
From memory the red connector was part of the wiring kit.
I’m fitting an OEM loom and trailer module to my Tiguan but I can’t find anyone to code it, most places have no idea what you are talking about! Fancy helping me code mine 😂
Have you got access to VAGCOM ?
@@ABIMOTO it’s ok, I fitted it and it hasn’t thrown an error, and strangely - everything works!!
Result 😁
Could you do a tow bar for my a8 d3 please?
Hi there, at present I only work on my own cars 👍
Where do I get the tow bar kit from
I got mine from PF Jones.
Good video I have a very similar car I live in Surrey Leatherhead
Would you be interested in fitting a tow bar for me
Thanks for the vote of confidence but I only work on my own stuff at the moment 👍