hello ， Thanks for the video ， one of our truck that have a ABS light on and code is spn 520502 fmi 10 ，when we start the truck and driving it truck will NOT go up 4 mph ， when I look up the computer ， all ABS reading is 0.80 but ， when I drive the truck ， wheel 6and wheel 7 will go down to 0.2 and 0.3 ， ( I did replace all the ABS sensor to new ) if you know anything about it, what is going on with the truck please let me know thank you very much !
I make videos too your allways gonna get haters that are TH-cam Trolls that means your doing your job right excellent video my man Nice!! Keep them coming.
Hello. Freightliner Cascadia 2016. Tractor ABS light on. The truck won't start. I don't have a check engine light on the dashboard only the ABS light on. If you guys know something about this can help me. Appreciate it.
How can I contact you? I have a problem with the ABS and I’ve been in two places and they won’t fix the issue. The abs light come in and disconnect the communication with the engine transmission light come in and the truck shut off
Mine is doing the same and I've been to two shops , trans-spn 563 fmi 14 and ABS- spn 807 fmi 2. Mine is a 2014 freightliner , I believe wabco ABS system , it seems to be more electrical problems than mechanical problems.. shops need more electricians more than ever now..
My'05 M2 106 has disc brakes and often their 66mm dual plastic pistons stick and freeze brakes resulting in scared rotors and burnt pads as well as melted sensors ! 2500$ per axle repair bills, I have a stack of these pairs over 25000$. Aside issues were engine overheating and shutting down on I95 as well as twice on Atlanta beltway. Turned out to be slipping trans clutch and malfunctioning fan clutch and it's relay. 9000$ to fix that. Currently in shop again for rear brake frozen damaged (again). Could the abs pump be bad and abs module. It's vbeen a nightmare owning this M2. Ws wipers often on when steering. No end in problems.
Hi bro I have 2021 Frt cascadia since change my brake pad ster axle I getting abs light on if stop for 5 minutes it goes when again start driving at 40 miles it comes back on dash computer say abs B us not responding plse help any idea if I shut down engine it goes but comes back again
I'm getting 2 codes brake abs mode switch open 136s016 05 and Brake sa11 spn000016 05 Abs and ATC light on. Can you tell me what the codes mean? They came on after washed my truck 2 weeks ago and the lights would go off but now they stay on
We replaced the ABS wheel sensor, drums and shoes. We are not getting code again SID-5 FMI 7 Wheel sensor ABS Axle 3 Left and also SPN-793 FMI 7 W S ABS Axle 3 left.
Thank you for this video. How long did it take you to replace this sensor? When I went to the shop here in Chicago I was told that it will take about 8-10 hours + parts + taxes. At the rate of $65/h that might come to $800 per sensor. I think its too much for the s..d light fix.
@@bigrigfix the sensor itself normally takes 20 mins max to change but LIKE I SAID I’ve seen it seized inside the bracket that houses it. I’ve had to put the housing in a vice and chisel it out. Took about an hour to get it out.
Big Rig Fix it’s sound like my front right steer tire always sounds weird and truck pulls to right ...i change the steer tire ,alignment ,shocks , sprint still have that issue !!! And that code com on and disappear sometimes....that’s really drive me crazy
Dr Ryan Ayala Check your wheel bearings play on the front axle out of spec .The abs sensor is not reading abs ring toner maybe bearings have to much play check spec and play.
@@JimBennett-iz5ty I actually hate pointing things like that out, but feel its absolutely an important detail! Such a shame it's taken two years for someone to notice too. Cheers!
![MV วิถีชีวิตใต้ - ผา อัยย๊ะ [Official MV HD]](http://i.ytimg.com/vi/nODlkOUu9B0/mqdefault.jpg)
Thanks. That was very thorough. I was able to troubleshoot my issue.
hello ， Thanks for the video ， one of our truck that have a ABS light on and code is spn 520502 fmi 10 ，when we start the truck and driving it truck will NOT go up 4 mph ， when I look up the computer ， all ABS reading is 0.80 but ， when I drive the truck ， wheel 6and wheel 7 will go down to 0.2 and 0.3 ， ( I did replace all the ABS sensor to new ) if you know anything about it, what is going on with the truck please let me know thank you very much !
In all these youtube repair videos everything comes apart so easy, LOL I never get those in our shop
Ikr
I make videos too your allways gonna get haters that are TH-cam Trolls that means your doing your job right excellent video my man Nice!! Keep them coming.
Thank you.
VERY VERY HELPFUL VIDEO MY GUY
Hello.
Freightliner Cascadia 2016.
Tractor ABS light on.
The truck won't start.
I don't have a check engine light on the dashboard only the ABS light on.
If you guys know something about this can help me.
Appreciate it.
What interface did you use for Wabco?
Thank you😃
Thanks for watching.
I Have Abs 136 SID 001 Fail 6 , any idea of what is wrong ? Thank you nice video
How can I contact you? I have a problem with the ABS and I’ve been in two places and they won’t fix the issue. The abs light come in and disconnect the communication with the engine transmission light come in and the truck shut off
Let me know where I can send you my info if you are interested in troubleshooting the abs issue. Thanks!
Mine is doing the same and I've been to two shops , trans-spn 563 fmi 14 and ABS- spn 807 fmi 2. Mine is a 2014 freightliner , I believe wabco ABS system , it seems to be more electrical problems than mechanical problems.. shops need more electricians more than ever now..
My'05 M2 106 has disc brakes and often their 66mm dual plastic pistons stick and freeze brakes resulting in scared rotors and burnt pads as well as melted sensors ! 2500$ per axle repair bills, I have a stack of these pairs over 25000$. Aside issues were engine overheating and shutting down on I95 as well as twice on Atlanta beltway. Turned out to be slipping trans clutch and malfunctioning fan clutch and it's relay. 9000$ to fix that. Currently in shop again for rear brake frozen damaged (again). Could the abs pump be bad and abs module. It's vbeen a nightmare owning this M2. Ws wipers often on when steering. No end in problems.
What to do if the abs and abs on dashboard stays light on? How to fix this?
Hi bro I have 2021 Frt cascadia since change my brake pad ster axle I getting abs light on if stop for 5 minutes it goes when again start driving at 40 miles it comes back on dash computer say abs B us not responding plse help any idea if I shut down engine it goes but comes back again
Huh?
I'm getting 2 codes
brake abs mode switch open
136s016 05 and
Brake sa11 spn000016 05
Abs and ATC light on. Can you tell me what the codes mean? They came on after washed my truck 2 weeks ago and the lights would go off but now they stay on
There Bendix or Wabco fault code look them up on google.
@@bigrigfix thanks
We replaced the ABS wheel sensor, drums and shoes. We are not getting code again SID-5 FMI 7 Wheel sensor ABS Axle 3 Left and also SPN-793 FMI 7 W S ABS Axle 3 left.
bien
Thank you for this video. How long did it take you to replace this sensor?
When I went to the shop here in Chicago I was told that it will take about 8-10 hours + parts + taxes. At the rate of $65/h that might come to $800 per sensor. I think its too much for the s..d light fix.
That sounds high maybe 4 hrs the sensor the sensor is not that much .
@@bigrigfix unless its seized in the sensor housing which has happened to me several times
That seems kind of ridiculous. It’s really easy to change the Sentra. Just check out the wheel and sometimes remove brakes.
@@bigrigfix the sensor itself normally takes 20 mins max to change but LIKE I SAID I’ve seen it seized inside the bracket that houses it. I’ve had to put the housing in a vice and chisel it out. Took about an hour to get it out.
help me to install this software
So what happens when you change all the sensor & the abs light still stays on after driving over 20,+
Troubleshoot the ABS fault step by step.
Have freight liner Columbia 2006 code Abs 136 sid 002 fail 10 , any idea !!! Is that will effect my truck driving !!!! Thank you
Dr Ryan Ayala is the truck driving different then Normal.
Big Rig Fix it’s sound like my front right steer tire always sounds weird and truck pulls to right ...i change the steer tire ,alignment ,shocks , sprint still have that issue !!! And that code com on and disappear sometimes....that’s really drive me crazy
Dr Ryan Ayala Check your wheel bearings play on the front axle out of spec .The abs sensor is not reading abs ring toner maybe bearings have to much play check spec and play.
Big Rig Fix thank you much sir
I’m out a fluke meter. That’s a harbor freight special.
Dane Berset craftsman
That only works for freighliners
07:10. Not picking on you, but its actually 4 hundredths of an inch.
I went to the comments just to see if anyone else picked up on that!
@@JimBennett-iz5ty I actually hate pointing things like that out, but feel its absolutely an important detail! Such a shame it's taken two years for someone to notice too. Cheers!
Hell we have those sensor brackets corrode off and have to replace them on out milk truck m2s. Never seen that before. Junk ass freightliner quality