Repair a noisy locomotive with an N scale Kato C44-9
ฝัง
- เผยแพร่เมื่อ 9 ก.พ. 2021
- If you want to help me make more videos, come to see my website:
watchtrainsnow.com/
This little guy was running noisy. Follow along as I get it back on track. - ยานยนต์และพาหนะ
I fixed 2 of my Dash9s thanks to this video. Keep up the great work!
Lots more to come in 2024.
Another great video. I enjoy the way you calmly tackle your problems, and it’s giving me the insight to repair my own fleet. Thank you
Thanks for watching!
Thank you so much for the clear video and step-by-step instructions. I had everything taken apart on a very similar unit, then my son came in and helpfully rearranged all the pieces into different orientations, and I wasn't sure if I had things put back together right. I had figured out almost all, but couldn't get the contact strip inserted correctly. (Put the fuel tank on AFTER placing the contact strips!) Everything is running great now, thanks!
That’s great! These are good runners.
Thank you! I found your video after my Kato C44-9W started squealing today. Your clear instructions on disassembly and things to check helped me fix the problem (looks like I over oiled it and the bearing springs were also a bit bent). I was a bit freaked out about disassembling my favorite Kato but your video walked me through it with no drama. I echo your comments on how well engineered the Kato drive train and chassis are. Thanks again.
Glad it was helpful.
Great video. those Katos are great engines. you are correct eBay is hard to find good deals anymore. Great video and thanks for sharing. Dave
Thanks for watching!
Thank you for the video! I had 2 Dash 9s that were squealing. Lubing the 4 bearing blocks on both of them fixed it!
Glad it was helpful to you.
Thank god, I just bought sd70mac with the same problem it's screaming all the way😂 btw thank you sir for your great sharing & fix... Have a nice day...
Thanks for watching!
I have 6 Kato N scale locomotives, 3 Amtrak P42’s, a Santa Fe EMD SDP40F, a Southern Pacific EMD SD70M & the Southern Pacific Daylight steam locomotive number 4449. I bought all of mine brand new & they all work great. When buying model railroad locomotives for model railroads, buy brand new from a hobby store or from the manufacturer. It is more expensive that way but it’s worth it and it will save you problems later as compared to buying them from unreliable sources.
Lately, it’s been cheaper to get new ones.
Nice job. Kato locomotives are my favorite.
Same here!
Fantastic video, thanks a lot you cured my loco.
Glad it helped
Great video! I've had some Dash 9s that made a lot of noise. I was able to troubleshoot to the point that I knew it wasn't the trucks or the motor, but didn't try lubing the worm gear bearings. Definitely something I'm going to try the next time. Thanks for the vid!
Thanks for watching!
Impressive.
Thanks for watching!
Nice repair. Never worked on Kato yet, but I know who I'll be watching if I do. Cheers, Jim L
Thanks for watching!
Very nice video! Just found your channel and subscribed. Great repair on this N scale loco! 👍
Yes, thanks! I had fun making the video.
Your welcome!
I have one with the same issue. thanks for the great video
Thanks for watching!
Great Video but I noticed on the Very First Truck you reassemble the one Wheel towards the bottom of the Truck had what looks to be a Imperfection in the wheel or looks like it has a flat spot in it, I had a Kato Amtrak Engine A F40PH one Rear Wheel Right in the center it looked as it had a spru Bur in it like the Wheel had been cut off a Spru..
In your Video I had to look a few times and @ 8:25 to 8:30 is where I seen that on the Wheel unless it was a bit oil or water but just wanted to pass on what I seen but what you do with your Engines is Well worth watching Great Video always Great Video's thanks for sharing them with Us..
I'm not sure what that is. maybe some of the anodizing got damaged. Anyway the engine runs great now.
Nice work! Thanks for this video. I have subscribed. I also do N scale as well.
Thanks for the sub!
Amazing video! what type of oil did you use?
Labelle 108
Good Video on maintenance of a Kato, I agree they are a well built and designed Loco. Did you lube up the truck gears off camera or did I miss that? which works better you think. the plastic safe oil or the white grease?
I find that the trucks don’t need any lubrication. They recommend the grease on the worm gears. I will sometimes put light oil on the worm gears. That’s what I find works best.
A friend told me the plastic has some lubricating properties so don't lube them .
Chooo choooooooo
Sooo much fun!
Kato need to go back to the old mechanism the new sprung ones are junk
I kinda like them, when they are adjusted properly, they are whisper quiet.