Can you use Stiction Eliminator in a Gas Engine?
ฝัง
- เผยแพร่เมื่อ 20 มี.ค. 2022
- Eric and Kyle talk about if you can you use Stiction Eliminator in a gas engine?
Take a look at our other videos: / hotshotsecret
Check out our products at: www.hotshotsecret.com/
Visit our Facebook: / hotshotsecret
If you have any video ideas, email them to Video@hotshotsecret.com - ยานยนต์และพาหนะ
Had a low speed injector stutter on 5.9 Cummings no fuel injector cleaner would change it. Two days with stiction E in oil issue gone. Was so impressed with it I put in my wife’s 5.3 vortex in two days oil pressure went from 40 to well over 60. Stuff is the real deal
Used Stiction Eliminator in 2015 Toyota Camry 4 banger, 70k miles to eliminate crust buildup around the piston rings. Common high-mile problem on these engines.
Report: Stiction Eliminator oil change came out pure black and stinky at 5000 miles. It DEFINITELY removed debris and buildup considering oil changes are normally somewhat golden on this car @5k. Engine is slightly less ticky, no discernable power or economy increase, just peace of mind. Still burns no oil between changes.
Adding to 2019 VW GLI @50k - will report results here.
P.S. Have your timing chain tensioner replaced early people! Completely eliminates the startup death rattle on these Toyota engines. It's an externally accessible part.
im gonna try this on my 2006 toyota yaris 1nzfe - Very common for the rings to stick and start consuming oil. im burning about 1L every 1000 miles at this point. 5w30 pennzoil platinum high mileage
the yaris has 354,000 miles. ill add recommended dose at next oil change
Can't wait!, This is like a hidden 💎, my gas Duo should be here this week!
💪
Can’t say enough good stuff about this stuff y’all rock
Thank you!
Let's say I had sticky rings. This being a 30wt oil, could I run it strait for a regular OCI, to clear ring landings, or could that hurt seals?
I had an old wore out small block 350 that had noisey lifters.
Added stiction eliminator to it and let it idle. After a few min the lifter tick was gone.
Question will this stiction eliminator additive help clean the back of valves on direct injection gas engine by going through the pcv system? Thanks
Any chance of getting your products distributed up here in Canada. Shipping rates to up here are crazy
Where in Canada are you located?
@@HotShotsSecret near Toronto, Ontario. About an hour northeast. Port perry
Flying J has some select products of ours.
@@HotShotsSecret ok good to know I'll check them out next time I'm out that way
I tried stiction in a 14 crv and 15 rav4. On rav4 it made the engine less noisy but on crv it did not seem to do anything with the noise.
Thank you, we love to hear this!
How often do I gotta keep using it? After I start using green diamond do I have to add stiction eliminator to the oil?
If running our oil no need to really use Stiction Eliminator.
I drive a 2013 VW GTI with a 2.0T motor. Would you recommend using this every oil change or switch to the regular FR3 and then use the stiction eliminator ever now and again? Car has over 103,000 miles on it.
Update: Just got my Stiction Eliminator and just did an oil change with it. Hope I'll see some improvements. Mostly curious how the turbo will like it with the possibility that there is a lot of build up due the how hot turbos get.
John, Use Stiction Eliminator every 3rd oil change for a maintenance clean out and use FR3 on the oil changes in between.
@@HotShotsSecret Thank you for your response. I'll start doing that when my next oil change comes around. I'm also going to try your LX4. And right before my oil change I'll try the Gasoline Extreme
So can you add it to gas powered motors?
Yes
What is the viscosity of siction eliminator?
It’s pretty thin, not at all like Lucas oil treatment, hotshots secret is far superior I ran the stiction eliminator in my 7.3 for 3 oil changes and now I run they’re green diamond oil and it’s by far the best oil for Diesel engines
@@braydenmiller9387 I use siction eliminator great products. I noticed a difference in my semi truck as well. I stopped using Lucas Stabilizer in my old truck which I bough used so why they hell not buy my new truck is never getting Lucas products only hot shot products I feel they actually work. It is thin I just wanted to know is it compatible to like a 20w oil or something?
It is close to a 30 wt oil, which is common in diesel engines.
@@HotShotsSecret thank you so much for the replay. Great product.
first
And the simple answer was ????? 4 minutes of what is left behind....
My gas engine injectors are cooled by the fuel and not the oil as they are on a diesel...
So...... Don't put it in your gasoline as it doesn't burn...
PS... Gasoline is a solvent unlike diesel which contains oil...
Who ever said or suggested to put it in with your gasoline? Stiction occurs on many internal engine components, e.g. lifters, rods, rockers, valves, crank, etc. That stiction over time leads to issues as is pointed out in the video. I run HotShot in my Jeep Grand Cherokee and have never had an issue.
Thank you!