If im seeing right, you dont have a cross wire for your middle battery. Your bms will only charge 1 battery out of the 3 in the middle which defeats the purpose of having a bms for balanced charging. Its an easy fix just have another wire connected parallel across your 7.4v and done
So you put electrical tape on the battery pack so that you can tape the BMS to it. My question is can you put PVC Heat Shrink Tubing over it, heat up the tubing so it looks more professional and keeps the structural integrity? I've seen a video where he puts 2 heat shrink tubings over it, so wondering if I can do the same.
Thank you for the video!! I have a question for the bms Amps, is it required to use a 20A, 40A or 60A for the 3s3p? Cause I don't really know what's that for😅
@@ElectroRetro thank for the reply, so the higher the most dangerous? I was about to buy a 40A is it good, for charging smartphones like mine that needs a 2.1A charger?
Do NOT solder directly to 18650 cells. They'll overheat and either be ruined or explode and you'll have a huge fire. You have to spot weld nickel strips to the cells and then solder wires to the strips. Plus, with spot welding, it is cheap, ensures a good connection, and can provide some structural support. It is also extremely space efficient, especially if you're working on a project that has very little room to work with and battery cell holders can get in the way of that.
You haven't connected 7.4 v cell volt terminals in parallel. It won't balance charge. Then what's the use of BMS.Only short circuit protection??😁.Please consider connecting 7.4v terminals in parallel😁
You have a problem on your wire connections. You have 3p*(3s), but only 1 serie have balanced charge, the other 2 series no. You should rectify your circuit.
Hii bro mean drone bana raha hu to kya 3s battery and bms power module ko sathe mea use karsakta hu drone mea 40a hai 11.8 v and charge bhi karsakta ek soket se... Flying time bhi jada milega
Yeah, you gotta be careful soldering directly to lithium batteries. And by careful, I mean keep a large bucket of sand right beside you to toss them in and cover them if things go south.
@@ElectroRetro Hi, again:-) will it work also with this BMS? 3S 40A Enhanced 18650 Charger Lithium Battery PCB BMS Protection Board Module 2 www.aliexpress.com/item/32835890976.html
Hello ulit sir, pwede po bang mag lagay ng isa pang pagkokonekan? Yung isa po ay para sa pagchacharge at yung isa naman po ay para sa appliances pwede po ba?
My master is a good work, but there is a problem. I couldn't exactly see which one where you soldered the cable. B 1 B- B + B2. I couldn't see where you connected them. I would like to watch a video.
Okay, my master, I saw it when I looked well, but I have B3 on my card? Where would be in B3 batteries? I would appreciate it if you please inform only where in batteries.
If im seeing right, you dont have a cross wire for your middle battery. Your bms will only charge 1 battery out of the 3 in the middle which defeats the purpose of having a bms for balanced charging. Its an easy fix just have another wire connected parallel across your 7.4v and done
I fixed it later
Right bro
So you put electrical tape on the battery pack so that you can tape the BMS to it. My question is can you put PVC Heat Shrink Tubing over it, heat up the tubing so it looks more professional and keeps the structural integrity? I've seen a video where he puts 2 heat shrink tubings over it, so wondering if I can do the same.
Is the middle serial connection supported by bms in this connection ?
the area in charging also the area where you conmect the appliances?
Yes it's same.
Would a normal 12v adapter work or u need a lithium charger?
Normal 12v adaptor will work
can i use a 19 volt charger or would that be to much?
No, you can use 12.6v - 13v.
@@ElectroRetro ok thank you
Welcome 😊
@@ElectroRetro Do Not use a charger higher than 12.6VDC!!!!!! You will overcharge the lithium cells and possibly create a fire.
Thank you for the video!! I have a question for the bms Amps, is it required to use a 20A, 40A or 60A for the 3s3p? Cause I don't really know what's that for😅
It's the maximum charge or discharge current.
@@ElectroRetro thank for the reply, so the higher the most dangerous? I was about to buy a 40A is it good, for charging smartphones like mine that needs a 2.1A charger?
20A is more than enough for charging smartphones.
Do NOT solder directly to 18650 cells. They'll overheat and either be ruined or explode and you'll have a huge fire. You have to spot weld nickel strips to the cells and then solder wires to the strips. Plus, with spot welding, it is cheap, ensures a good connection, and can provide some structural support. It is also extremely space efficient, especially if you're working on a project that has very little room to work with and battery cell holders can get in the way of that.
how much the current will it produce? 12 Volt 2 A?
5000mah
@@ElectroRetro so ity can powered up a 12v 2A devices?
@@nicholassatria8031 yes
@@ElectroRetro oke thankyou bro
it really help me
Current is not 5000mah. That's capacity
You haven't connected 7.4 v cell volt terminals in parallel. It won't balance charge. Then what's the use of BMS.Only short circuit protection??😁.Please consider connecting 7.4v terminals in parallel😁
You have a problem on your wire connections.
You have 3p*(3s), but only 1 serie have balanced charge, the other 2 series no. You should rectify your circuit.
Hii bro mean drone bana raha hu to kya 3s battery and bms power module ko sathe mea use karsakta hu drone mea 40a hai 11.8 v and charge bhi karsakta ek soket se... Flying time bhi jada milega
Can you please tell me in English.
@@ElectroRetro can i use this battery and bms module in drone...!!!
I don't think so because this battery is little bit heavy normally drones use lightweight Lipo batteries.
Sir can i use 22 awg wire for wiring the battery and use 16 awg wire in main connection?
Yes
@@ElectroRetro ilang ampere po yan?
6 to 9 ah
Yung 16awg wire sa B+b- at yung 22 po ay sa battery na icoconnect kopo sa bms pwede po? gusto ko lng po kac makasiguro
@@arjakegado4592 yes, you can use that.
BMS wiring/soldering process left out. Makes is really difficult for new users.
Hola...de cuantos ah es el bms?...gracias
Hello sir i have 12v 3s40A bms and six cells of 4.2v 18650. Can i connect and make the battery.
Yes
How can i get bms??
You can purchase online or in local electronics store
online pakistan wesite ka kia name? ??
hallroad.org/3s-25a-bms-circuit-in-pakistan-li-ion-battery-charging-protection-in-pakistan.html
Bos kalo di kasi modul step up apakah mampu
Pls tell me in English
@@ElectroRetro bro can you put a step up module? translate from indonesia
Yes
@@nicholassatria8031 thank you freind
@@arwannur yes of course
What is the Ah ?
6Ah
Yeah, you gotta be careful soldering directly to lithium batteries. And by careful, I mean keep a large bucket of sand right beside you to toss them in and cover them if things go south.
Was waiting for your comeback.Nice video 😀😀
Nice project, How do you will charge this pack? Thanks.
You can charge this pack using p+ p- point in bms.
@@ElectroRetro OK , but with regular Li Ion charger, or with something more special?
You can use any charger with output voltage of 12.6v to 13.6v
@@ElectroRetro Hi, again:-) will it work also with this BMS? 3S 40A Enhanced 18650 Charger Lithium Battery PCB BMS Protection Board Module 2 www.aliexpress.com/item/32835890976.html
@@ElectroRetro how many amp should the 12v charger be
The LEGEND IS BACK ALSO NICE VID THANKS BRO😁
3s means you are only taking advantage of 30% out of 100% battery?
3s means 3 cells in series connection
@@ElectroRetro Thanks.
I have tried it today works perfectly
Hello ulit sir, pwede po bang mag lagay ng isa pang pagkokonekan? Yung isa po ay para sa pagchacharge at yung isa naman po ay para sa appliances pwede po ba?
Yes you can
@@ElectroRetro pwede po bang gumamit ng awg22 silicone wire ? or mas better po kung copper wire?
@@arjakegado4592 Both will work fine
@@ElectroRetro ah thank u po wait kopo nxt vids nyo
😊
Merhaba batarya link
I used scrap laptop battery
Bmc kart link ? 11.1 v 25 A ?
1:25 bro, dont touch me with this
My master is a good work, but there is a problem. I couldn't exactly see which one where you soldered the cable. B 1 B- B + B2. I couldn't see where you connected them. I would like to watch a video.
0:23 connect like this.
Okay, my master, I saw it when I looked well, but I have B3 on my card? Where would be in B3 batteries? I would appreciate it if you please inform only where in batteries.
I think you are using 4s bms board.
Exactly, I could not understand B3 on the bms card, but thank you for your reply.
why 9 batteries? 3 aren't enough?
3 batteries enough, but if you need more capacity u can use more batteries in parallel.
Ilang ampere yang module mo kuya?
25a
if you charge the battery at discharged limit... how many hours to know when it's fully charge using that ordinary 12v power supply?
2-3 hours
@@ElectroRetro me your new subscriber... thanks.... 😁
Thanks a lot bro.
I need this on my Bluetooth speaker, i build 200 watts soeaker portable Bluetooth on my channel
👍
Muchas gracias mi amigo gracias a tu vídeo pude conectar todo correctamente
Honda shine bike battry worke viduo
Bro what is the ampere of the pack?
About 6ah
Good video
6:39 the end is kinda scare... the motor almost shorted out the connections :o
Gunge hay kia
👍