Excellent I love UFH😍 rads are rubbish but make us rich! For the past 6 years in the EU 90% of new build is UFH the rest is 8% air con 2% rads. In the UK ZERO UFH. Why do our MPs hate eco UFH? take care, George 😍👍
If installers follow your advice they can't go wrong. Hot water temperatures and cylinder recovery times are the compromise. Even properties insulated to the latest standards will struggle to compete overall with gas. COP figures can be misleading, the difference in fuel costs need to be taken into consideration. How the electricity is sourced is a major factor to be considered if CO2 reductions are going to be meaningful. No easy route to zero carbon.
With the dry floor construction what material is underneath the diffuser plates, and how much height does that add to the floor? Can you add slate tiles directly on top of the diffuser plates or do you need some type of wooden flooring directly on top of the diffuser plates? If I have an uneven, sloping concrete subfloor what is the most effective way to create a level floor when using a dry floor construction?
2 days looking at youtube UFH. learned the most from this video great presentation i was engaged all through.Everything was clear and understandable ,thank you 👍
Brilliant, and very useful for a UFH newbie like me. I'm trying to decide the best method for my garage/workshop (which has yet to be built), just so I don't freeze in there whilst working or machining (stood in one placefor a long while). This is perfect - thank you.
20 Degrees? We dream of 20 Degrees. Max is 18C, except in summer, in our 1805 stonewalled house. Put on another jumper. LOL. We had underfloor heating installed in our previous Victorian house; it was great.
Hydrogen boilers are an insanely terrible idea. Takes 4kw of electricity to make 1kw of hydrogen. Or you can get the hydrogen from fossil fuels. Only reason they use it is to keep gas transporters in business.
It sounds like it MAY be the fuel for the future as they are finding ways to make hydrogen with a positive return on power...getting more energy than you use manufacturing it.
Thing is, that you can use solar or wind to create alot of el energy sometimes and its expensiv to transport and store it or amlost impossible at large scale, so you make hidrogen
Derek is incorrect when he says that hydrogen boilers don't emit any pollution. Hydrogen WILL emit NOx when burnt in AIR. The only way to ensure the only products are H2O molecules is to supply the burner with pure oxygen, which isn't going to happen. If you burn hydrogen in AIR, you will get NOx, which is bad for health, even before you consider GHG effects.
@Roger Bradley that's a good point. The NOx byproduct needs to be weighed against the production...and disposal of batteries and their pollutants. Mining lithium, cobalt, copper is certainly not without its downsides. Most of it happens NOT in the USA...so we DO get to export pollution...which is a BIG goal here in US.
@@rogerwhiting9310 it's true that batteries have an environmental impact. They're not perfect. However the lifetime impact of even the worst batteries is significantly lower than mining and combustion of fossil fuels. Cobalt is already disappearing from newer battery chemistries, shears a LOT of cobalt is used to remove sulphur from petrol, but few critics of EVs realise that. Flow batteries can last for several decades in service.
If you like this video say so, or if you don't "leave a constructive comment" :) Very helpful. Bought a house with an air to air heat pump and as I was getting ready to strip all the floors thought about underfloor heating. Sounds very hard to DIY... Read in one of the comment that you can just pressurise with a water hose. I think that's quite helpful, as the actual laying of the pipes sounds easy enough, it's the dicking around with the heat pump that scares me. Regardless this was a really good video. 40% savings in energy on top of heat pump... I'd end up paying next to nothing in energy... I'll keep on reading. I am in Switzerland where labor costs the GDP of a small country, so can't really hire easily to do work here.
Looking at the spreader plates installed on a floating floor: how thick should the chipboard and engineered wood be? In the clip it mentions the flooring shouldn't be more than 15 mm thick. Is this for both the structural chipboard and the finishing wood layer? Thanks
Hi, enjoyed the video! Thanks for this! I did have one question. On 38.08 into the video, you mentioned a thin layer of polyethylene DPM above the screed if it's suspended timber flooring. To date, I haven't found any guidance or manufacturing info that suggests a polythene sheet is required. Is this mandatory per building regs, or optional? Also is there any risk of that sheet burning or catching fire from the pipes below?
Hi. Can you give us a price how much will cost for a house with 2 3 bedrooms and 70 90 mp³? Just to have an idea how much we are going to spend ... just an example how much can cost :-)
Honestly a great video. Have been searching for a detailed video on this topic for some time. Thank you for that. Also the "dancing like michael jackson" and the edited "maximum" send me flying :D
Hello I am in process of installing water underfloor heating. As part of the project the engineer is also moving the boiler from kichen to garage. My question is when the project completed what kind of certificate and documentation should I get for the underfloor heating installation and for moving the boiler for my future record. Can you please list out what should I get from the company on completion please. Thanks,
I'm seriously considering having UFH installed to my bungalow before we start a full renovation. It was constructed in the 1950's and has a concrete floor so by my understanding from the video I would require a "dry floor construction" my question is because of it being concrete would I need to lay down a damp proof membrane and extra insulation before laying the spreader plate system?
Heat loss to the subfloor is relatively low (10-15%) so there’s relatively high cost vs the savings benefit of this. You’ll also lose more ceiling height!
Under floor heating is an old technology at this point. The dust and particles canot seatle in the room and will cause lung issues down the line. The healthy option is when the pipes are in the wall.
I did not realise there was so many elements to ensure a good installation. This makes me worry that there are going to be lots of poorly installed systems out there as (certain) installers cash in on the rush to carbon zero coupled with the lack of communication and information, to and for the general public.
amazing video, I was wondering if you can provide us information for who are going to move in to a new build with Rods, but want to convert it to UFH , does that work at all ? what are things we need to know . cheers
It’s all about the sub floor and height of the ceilings. Most new builds have concrete slabs so an overlay system is needed so probably the most expensive way of installing underfloor heating.
Hi can we use two different pipe sizes with same manifold using an adapter. I'm thinking for using a 16mm pipe for my kitchen which has a larger area and 12mm pipe in hallway with wood floor which i will take out n install 60mm insulation between 100mm joists.
Why would you? To achieve different temperatures you put the pipes closer or nearer together. The manufacturer of the system you choose can help you to determine this.
@@tomkatgastraining Its because my kitchen is a new build still under construction so i can set up the floor depth. but hallway is an old built and has 100mm joists. hence thinking of putting a low depth insulation (e.g. 60mm ) which will leave 40mm for pipe and screed. so using a small diameter will give me more space for screen (40mm) and then i will put a membrane and tiles on top. Dont want this to go higher then the adjacent rooms.
Hi Derek What is your opinion on low profile underfloor systems with 9.9mm pipes? Can the small diameter of the pipe be an issue on the longterm? The one what we were quoted claims only 3.5 cm build up on the existing subfloor. It has 1.5cm screed on top of the castellated panels. Will that thickness be strong enough? Tia Peter
For a first floor flat with timber joists, no insulation between joists and traditional T&G timber floorboards, which of pipework methods shown is most cost effective?
Dear Expert, Thank you for the brilliant explanation. My question is whether we can install new laminate on top of old ceramics while using a wet floor heating system. Could you please guide me on whether this would prevent efficient heating conductivity, increase energy consumption, and how it might affect moisture levels? Additionally, what steps can I take to control these factors? Best regards,
Is legionella really that much of an issue ? My cylinder stat has been about 48 degrees for as long as I can remember……thinking that legionella only thrives in static water I think I’ll be ok until I’m so old that I can only be arsed to shower once a month 😂
Great video mate, looking at getting underfloor heating as I probably have Red Ash and all the floors need to be ripped up. Really informative, will it be ok on a 10 year old vaillant combi you reckon? Cheers
Great video, but I've now just gone off the idea of using underfloor heating in my extension due to its complexity and cost etc. My house is absolutely fine with radiators so my extension will be as well. Plus the log burner that's gonna go in there.
@@tomkatgastraining are you referring to underfloor heating control manufacturers or manifolds ?. I mean there is many parts in underfloor heating with multiple manufacturers
Apologies but I am a newbie. Our boiler is in the corner of the kitchen. We are extending out into the garden and looking at UFH. The building will go upto the garage so looking at putting the manifold in there. My lack of knowledge then hits a wall. Can the flow and return from manifold not tee off the boiler? As I was told it would need to come off near the the airing cupboard. Which would be a chore in itself to get pipes from here. Thank you and loving your videos.
This is great video, lots of important information. I have a question. If I do it in my old house with floor on joists, there are electric cables and water pipes running below the floor. With Ufh installed, how would I get access to them in future if something needs repairing for electricals or mains water?
Do you have any views on retrospective installation of underfloor heating on a concrete subfloor? Is it better to fit a low profile system (say 15mm depth) or in-ground systems (such as JK Floorheating ltd). Obviously fitting pipes directly into concrete will add to heat losses (I assume) but is this significant? Thanks for any guidance. Have also though of adding indexing to your videos so that it's easier to find sections. It would be a good addition and is easy to do.
Hi really interesting. Just thinking what about house with wooden flooring upstairs if they need rewiring or Spot lights adding for downstairs in future how can you access easily
Brilliant video. If laying in a ground floor self build, with needing to pressurise to 6bar before final screed, can this water be taken from a hose from outside mains or does it require your permanent manifold plumbing and the pump installed?
At 1:50 you mention space heating can be run at a low flow temperature, e.g. 30°, but hot water cant -needs to be 60-65 degrees. How can the same system have two different temperatures? Or would you need a different system for hot water as opposed to heating? I tought airpumpa could replace a gas bouler but if they only have a flow temperature of 30 how is this possible.
Blending values reduces the flow temperature on the underfloor heating so able to run 72 degrees centigrade to the manifold then it’s reduced down by the blending valve
UFH doesn't give off radiant heat. Radiant heat is when a heat source heats up another object without heating the air in between - ie. emitting a large amount of IR energy. UFH still works via the principle of convection.
You have just described how underfloor heating works the water in the pipe heats the screed which heats the air in the room via radiation. If underfloor heating works by convection why is the ceiling the coolest point
Hi Derek, thanks for the video. I don't have UFH at the moment but I'm slowly renovating my house starting with the hall which has a suspended timber floor. I want install a new LVT floor covering so I would like to pre-install the pipework for UHF so I don't have to do it later. I have 22mm floor boards which I will remove and presumably install the following: 75mm insulation board with batons, spreader plates, pipe loop and then new 22mm subfloor plus a thin floor levelling screed with the LVT covering on top. As I only want to buy the pipe and the plates right now my questions are: Which is the best system to buy ie pipe diameter etc and is 22mm ply plus the LVT covering going to be ok for the heat to radiate through? many thanks Adam
I removed the old floor boards and screwed them under the joists to support the insulation. Then ran the pipe and filled the space with a weak mixture of sand/cement, followed by new flooring chipboard.
Excellent I love UFH😍 rads are rubbish but make us rich! For the past 6 years in the EU 90% of new build is UFH the rest is 8% air con 2% rads. In the UK ZERO UFH. Why do our MPs hate eco UFH? take care, George 😍👍
All the best for the new year George 👍🏻
UK is way behind Europe in aspects of energy efficiency and quality of building standards
I don't remember this post
If installers follow your advice they can't go wrong.
Hot water temperatures and cylinder recovery times are the compromise.
Even properties insulated to the latest standards will struggle to compete overall with gas.
COP figures can be misleading, the difference in fuel costs need to be taken into consideration.
How the electricity is sourced is a major factor to be considered if CO2 reductions are going to be meaningful.
No easy route to zero carbon.
Which carbon are you taking about
With the dry floor construction what material is underneath the diffuser plates, and how much height does that add to the floor? Can you add slate tiles directly on top of the diffuser plates or do you need some type of wooden flooring directly on top of the diffuser plates? If I have an uneven, sloping concrete subfloor what is the most effective way to create a level floor when using a dry floor construction?
2 days looking at youtube UFH. learned the most from this video great presentation i was engaged all through.Everything was clear and understandable ,thank you 👍
What a great video. Packed full of seriously useful information. Thanks mate!
Brilliant, and very useful for a UFH newbie like me. I'm trying to decide the best method for my garage/workshop (which has yet to be built), just so I don't freeze in there whilst working or machining (stood in one placefor a long while). This is perfect - thank you.
just use a old webasto
20 Degrees? We dream of 20 Degrees. Max is 18C, except in summer, in our 1805 stonewalled house. Put on another jumper. LOL. We had underfloor heating installed in our previous Victorian house; it was great.
Absolutely brilliant fantastic video so much info that I would have never of thought of Cheers 👍👍👍
Hydrogen boilers are an insanely terrible idea. Takes 4kw of electricity to make 1kw of hydrogen. Or you can get the hydrogen from fossil fuels. Only reason they use it is to keep gas transporters in business.
It sounds like it MAY be the fuel for the future as they are finding ways to make hydrogen with a positive return on power...getting more energy than you use manufacturing it.
Thing is, that you can use solar or wind to create alot of el energy sometimes and its expensiv to transport and store it or amlost impossible at large scale, so you make hidrogen
Derek is incorrect when he says that hydrogen boilers don't emit any pollution. Hydrogen WILL emit NOx when burnt in AIR.
The only way to ensure the only products are H2O molecules is to supply the burner with pure oxygen, which isn't going to happen.
If you burn hydrogen in AIR, you will get NOx, which is bad for health, even before you consider GHG effects.
@Roger Bradley that's a good point. The NOx byproduct needs to be weighed against the production...and disposal of batteries and their pollutants. Mining lithium, cobalt, copper is certainly not without its downsides. Most of it happens NOT in the USA...so we DO get to export pollution...which is a BIG goal here in US.
@@rogerwhiting9310 it's true that batteries have an environmental impact. They're not perfect. However the lifetime impact of even the worst batteries is significantly lower than mining and combustion of fossil fuels. Cobalt is already disappearing from newer battery chemistries, shears a LOT of cobalt is used to remove sulphur from petrol, but few critics of EVs realise that. Flow batteries can last for several decades in service.
If you like this video say so, or if you don't "leave a constructive comment" :) Very helpful. Bought a house with an air to air heat pump and as I was getting ready to strip all the floors thought about underfloor heating. Sounds very hard to DIY... Read in one of the comment that you can just pressurise with a water hose. I think that's quite helpful, as the actual laying of the pipes sounds easy enough, it's the dicking around with the heat pump that scares me. Regardless this was a really good video. 40% savings in energy on top of heat pump... I'd end up paying next to nothing in energy... I'll keep on reading. I am in Switzerland where labor costs the GDP of a small country, so can't really hire easily to do work here.
Nice one Derek. You’re a top geezer. The point about the rugs was actually something I’d never considered. 👍
Absolutely brilliant video thanks for your efforts ☺️ very much appreciated 👍👌
Brilliantly explained great video will be doing my house with UFH keep up the videos
Looking at the spreader plates installed on a floating floor: how thick should the chipboard and engineered wood be? In the clip it mentions the flooring shouldn't be more than 15 mm thick. Is this for both the structural chipboard and the finishing wood layer? Thanks
I have wet UFH fuelled by a gas boiler.. My concerns are, how will an air source heat pump effect it's efficiency. .?
This is an absolutely wonderful video. Thank you it’s been so helpful.
Absolutely love this video, just trying to get clued up before contacting companies about installing an ASHP and UFH
Hi, enjoyed the video! Thanks for this! I did have one question. On 38.08 into the video, you mentioned a thin layer of polyethylene DPM above the screed if it's suspended timber flooring. To date, I haven't found any guidance or manufacturing info that suggests a polythene sheet is required. Is this mandatory per building regs, or optional? Also is there any risk of that sheet burning or catching fire from the pipes below?
Hi. Can you give us a price how much will cost for a house with 2 3 bedrooms and 70 90 mp³? Just to have an idea how much we are going to spend ... just an example how much can cost :-)
Honestly a great video. Have been searching for a detailed video on this topic for some time. Thank you for that. Also the "dancing like michael jackson" and the edited "maximum" send me flying :D
Thanks as always for your time Tomkat. The research, recording, editing, thumbnails and publishing.
You always install radiators under windows so you dont get the cold drag, with floor heating you always get the cold drag from the windows
Building regulations? What location/country?
Hello
I am in process of installing water underfloor heating. As part of the project the engineer is also moving the boiler from kichen to garage.
My question is when the project completed what kind of certificate and documentation should I get for the underfloor heating installation and for moving the boiler for my future record.
Can you please list out what should I get from the company on completion please.
Thanks,
Two and half months to dry? is the floor got a limit of how much weight it can take? is a resin quicker drying time?
I'm seriously considering having UFH installed to my bungalow before we start a full renovation. It was constructed in the 1950's and has a concrete floor so by my understanding from the video I would require a "dry floor construction" my question is because of it being concrete would I need to lay down a damp proof membrane and extra insulation before laying the spreader plate system?
Heat loss to the subfloor is relatively low (10-15%) so there’s relatively high cost vs the savings benefit of this. You’ll also lose more ceiling height!
Absolutely brilliant and very informative and educational thank you very much 👍🏿.
Brilliant, really enjoyed your presentation. Good teaching ability. Will look for your other videos on heating.
Under floor heating is an old technology at this point. The dust and particles canot seatle in the room and will cause lung issues down the line.
The healthy option is when the pipes are in the wall.
I did not realise there was so many elements to ensure a good installation. This makes me worry that there are going to be lots of poorly installed systems out there as (certain) installers cash in on the rush to carbon zero coupled with the lack of communication and information, to and for the general public.
LOLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLL global warming is a LIE ... But great video !
The question is, can I have both underfloor and radiators to use for an extra boost?
Very helpful video mate, really appreciated 👍
what do you do with the power output and the max heat output? i didnt get that part, what is the capacity needed per square meter?
Thanks for being clear yet detailed. Learnt a lot from this, thanks
A very comprehensive and informative video, presented in a relaxed easy to digest format.
I have learned a lot from this video, Thank you.
this is such a great video... thanks!
amazing video, I was wondering if you can provide us information for who are going to move in to a new build with Rods, but want to convert it to UFH , does that work at all ? what are things we need to know . cheers
It’s all about the sub floor and height of the ceilings. Most new builds have concrete slabs so an overlay system is needed so probably the most expensive way of installing underfloor heating.
Extremely help this, thank you very much for posting this and sharing knowledge :)
Thanks. Very good
Thanks, great explanation. Planning to do my underfloor heating as DIY
Where are some good sites to buy the system from?
Great video well done
Much appreciated! Very well articulated 😊 thank you 🙏
Just made a carpenter confident installing ufh! 🎉
Hi can we use two different pipe sizes with same manifold using an adapter. I'm thinking for using a 16mm pipe for my kitchen which has a larger area and 12mm pipe in hallway with wood floor which i will take out n install 60mm insulation between 100mm joists.
Why would you? To achieve different temperatures you put the pipes closer or nearer together. The manufacturer of the system you choose can help you to determine this.
@@tomkatgastraining Its because my kitchen is a new build still under construction so i can set up the floor depth. but hallway is an old built and has 100mm joists. hence thinking of putting a low depth insulation (e.g. 60mm ) which will leave 40mm for pipe and screed. so using a small diameter will give me more space for screen (40mm) and then i will put a membrane and tiles on top. Dont want this to go higher then the adjacent rooms.
Hi Derek
What is your opinion on low profile underfloor systems with 9.9mm pipes?
Can the small diameter of the pipe be an issue on the longterm?
The one what we were quoted claims only 3.5 cm build up on the existing subfloor.
It has 1.5cm screed on top of the castellated panels. Will that thickness be strong enough?
Tia
Peter
great video!! Really learned a lot about this for my upcoming refurb, Thanks,
your a kingsman arnt you? who else would stuff a dog. dog didnt move confirmed. again brilliant upload.
Great video. What is your feedback on Nu-Heat? Or any other supplier recommended?
Thanks so much for the video and info!
It explained everything well and clear!
I don't like to stick tiles directly to the floor. Is it ok to put down cement board on the floor and stick the tiles to that. Will that work?
You would have to speak to the manufacturer of the underfloor for that information
For a first floor flat with timber joists, no insulation between joists and traditional T&G timber floorboards, which of pipework methods shown is most cost effective?
Dear Expert,
Thank you for the brilliant explanation. My question is whether we can install new laminate on top of old ceramics while using a wet floor heating system. Could you please guide me on whether this would prevent efficient heating conductivity, increase energy consumption, and how it might affect moisture levels? Additionally, what steps can I take to control these factors?
Best regards,
Very informative but what about shrinkage after the screed has dried out. Do you really need to put air at 6 bar in the piping, thanks
Is legionella really that much of an issue ? My cylinder stat has been about 48 degrees for as long as I can remember……thinking that legionella only thrives in static water I think I’ll be ok until I’m so old that I can only be arsed to shower once a month 😂
Extremely informative video. It was really helpful mate. Thank you.
Excellent video, have learnt a great deal from this, now far more confident when I make my decision on which contractor to choose.
Brilliant! Most useful complete video I've seen so far!
I hadn't even considered the impact of rugs trapping heat and damaging the flooring - thanks!
Great video mate, looking at getting underfloor heating as I probably have Red Ash and all the floors need to be ripped up. Really informative, will it be ok on a 10 year old vaillant combi you reckon? Cheers
This was incredibly well explained. Thank you.
Great video!! Do you think it is possible to install water heating room by room?
Great video, but I've now just gone off the idea of using underfloor heating in my extension due to its complexity and cost etc. My house is absolutely fine with radiators so my extension will be as well. Plus the log burner that's gonna go in there.
Another nice video again derek, can you make a playlist of your 10 minutes video derek.
it has been really of great educational and informative video. thanks
Thanks Derek - very informative.
Great video. What are the best manufacturers for UFH in UK?
There isn’t it all depends on the system you require and your budget. Installers always have their own favourites so speak to the installers.
@@tomkatgastraining Thanks!
This was so so helpful, thank you very much 😊
Can you use concentric with spreader plate system ?
You will need to get technical information from the manufacturer of the products because it depends on what you are using for what you can use
@@tomkatgastraining what are reputable brands available in Europe ?
Great video, set it clearly what we needed to know. Cheers mate
I was wondering, how much flow hight do you need to have underground heating on a concrete floor
20 Degrees? That's not much
Thank you for this very informative video. Loved your no nonsense presentation.
i heard manufacturer 100 times . but never said manufacturer of what ? pipes ? manifold ? heat pumps ?
The underfloor heating system
@@tomkatgastraining are you referring to underfloor heating control manufacturers or manifolds ?. I mean there is many parts in underfloor heating with multiple manufacturers
@@Jonas-sg1eo normally you would buy the full system from the one manufacturer ie pipe manifold and controls
@@tomkatgastraining sonif you buy from local plumbing shop everything separately manifolds pipes ect how do ypu calculate layouts and other things
Excellent video and very informative, thanks. I wonder which manufacturer of UFH you prefer!
I have no preference just use the best system for the job
Thank you for this - very useful.
Apologies but I am a newbie. Our boiler is in the corner of the kitchen. We are extending out into the garden and looking at UFH. The building will go upto the garage so looking at putting the manifold in there. My lack of knowledge then hits a wall. Can the flow and return from manifold not tee off the boiler? As I was told it would need to come off near the the airing cupboard. Which would be a chore in itself to get pipes from here.
Thank you and loving your videos.
All depends on your system you have, is it open vent is it a system boiler where is the pump all these thing need to be considered.
Very helpful, thank you.
This is great video, lots of important information. I have a question. If I do it in my old house with floor on joists, there are electric cables and water pipes running below the floor. With Ufh installed, how would I get access to them in future if something needs repairing for electricals or mains water?
From below. If no access below then underfloor heating is not recommended
Do you have any views on retrospective installation of underfloor heating on a concrete subfloor? Is it better to fit a low profile system (say 15mm depth) or in-ground systems (such as JK Floorheating ltd). Obviously fitting pipes directly into concrete will add to heat losses (I assume) but is this significant? Thanks for any guidance.
Have also though of adding indexing to your videos so that it's easier to find sections. It would be a good addition and is easy to do.
There are lots of overlay systems that you can use on a concrete subfloor. These insulated panels will help with heat loss through the floor
Great video. You have really helped me out understanding the system.
It's time for houses to be built with two solid floors .
Brilliant video thanks so much
Hi really interesting.
Just thinking what about house with wooden flooring upstairs if they need rewiring or Spot lights adding for downstairs in future how can
you access easily
Through the ceiling bellow
👍 brilliant video, what manufacturers do you recommend derek ?
I don’t really have a recommendation Sam it is all down to the type of job and the customers budget
Excellent
Brilliant video. If laying in a ground floor self build, with needing to pressurise to 6bar before final screed, can this water be taken from a hose from outside mains or does it require your permanent manifold plumbing and the pump installed?
You fill with a hose and then use a pressure tester to increase the pressure.
Great video. Very informative. You're a great teacher. 👍
🤘😎🤘
At 1:50 you mention space heating can be run at a low flow temperature, e.g. 30°, but hot water cant -needs to be 60-65 degrees. How can the same system have two different temperatures? Or would you need a different system for hot water as opposed to heating? I tought airpumpa could replace a gas bouler but if they only have a flow temperature of 30 how is this possible.
Blending values reduces the flow temperature on the underfloor heating so able to run 72 degrees centigrade to the manifold then it’s reduced down by the blending valve
Thermostat regulated valve is there for that purpose
thanks so much
UFH doesn't give off radiant heat. Radiant heat is when a heat source heats up another object without heating the air in between - ie. emitting a large amount of IR energy. UFH still works via the principle of convection.
You have just described how underfloor heating works the water in the pipe heats the screed which heats the air in the room via radiation. If underfloor heating works by convection why is the ceiling the coolest point
What's the difference between an idiot and......never mind
On a separate note.. how the hell do you gas rate on a EDMI GS-60B meter??
Struggling right now.
I guess you haven’t seen my video on gas rating smart meters then
@@tomkatgastraining I have Derek but this model weren't on it.
I'll check it again.
Thanks.
Is it possible to use two manifolds ( one for each floor).
You can have multiple manifolds
Hi Derek, thanks for the video.
I don't have UFH at the moment but I'm slowly renovating my house starting with the hall which has a suspended timber floor. I want install a new LVT floor covering so I would like to pre-install the pipework for UHF so I don't have to do it later. I have 22mm floor boards which I will remove and presumably install the following: 75mm insulation board with batons, spreader plates, pipe loop and then new 22mm subfloor plus a thin floor levelling screed with the LVT covering on top.
As I only want to buy the pipe and the plates right now my questions are: Which is the best system to buy ie pipe diameter etc and is 22mm ply plus the LVT covering going to be ok for the heat to radiate through?
many thanks Adam
I removed the old floor boards and screwed them under the joists to support the insulation.
Then ran the pipe and filled the space with a weak mixture of sand/cement, followed by new flooring chipboard.
Great video! 👍
Very informative
Brilliant vid Derek!
Excellent
Great video 👌🏻