I've used the chemical guys a lot and like he said, it cleans, but they weren't lying that it protects. I apply a small coat of it after cleaning and drying. It leaves it walkable to where you can step on it. It does come back to almost factory finish. It's slightly slippery but not overly. You can still get a good grip. One or two sprays on a wheel rag coats it just fine
I think if you are a pro detailer you would probably go with an APC diluted to save some pennies..As an enthusiast I would probably use the Adams. The one I want to try next is the mckees version.. Its supposed to revitalize the mats...
Looks like the cg had a little bit more Matte look for the after, because even though the adams one foamed up it still missed more than the cg. Because they are concentrated I think it is smart to rinse first just like anything else when you was a car.
This is a tough test to judge, Adam's does foam up and give the illusion of a better deep clean, while chemical guys does mislead with the label. All in all, both clean well and the end result is hard to tell which cleaner was used on which mat. Thank you for the video.
Looks equal to me. You should do a test between one of these and a degreaser or APC. I usually use either an orange degreaser or strong APC like Super Clean diluted for heavy grime (3:1 or 2:1). I would be curious to see if these do a better job because in terms of price, they are a lot more expensive than a degreaser or APC which usually come to about 1$ per 32 oz bottle one diluted.
Clean with an apc them apply a thin layer of the chemical guys and it makes the weathertech mats nice and deep and nonslip no dressing I've used looks good after it dries. Too spendy to use as a cleaner as a pro.
Interior detail sprays both clean and leave behind UV protection so maybe that's what CG was going for. I'm really surprised even though you dropped and broke the Adams spray head the CG one didn't break on it's own. Every spray head on their 16oz bottle break immediately.
Jumbo, MR from CG was supposedly works better once your have washed and dried them before using it. I have been applying it as a protectant and it works much better that way. Also I do wash CG MR, simply use MF Towel to wipe and let it dry naturally. I guess when you are running a business you have to resort to work smarter and not harder due to time constraints
Adams does not recommend a pre-rinse. However you chose to disregard this critical aspect. So the product was not used as directed. This itself may have made the Adam's product less effective. Why review a product when you don't follow basic recommended user instructions?? Perhaps re-do the video whereby Adams is used without a pre-rinse.
Two things… 1. Brown was from the chemical on your asphalt driveway not from the mats. 2. Should have followed directions on the bottle of products for a true fair comparison.
The rear mats, you mixed both products together that didn't make any sense?
I just use an APC like SuperClean and it works great. No need for a specialty cleaner.
What did you do about the dull finish left behind the cleaner?
@@n9wox I usually lightly dress them
I've used the chemical guys a lot and like he said, it cleans, but they weren't lying that it protects. I apply a small coat of it after cleaning and drying. It leaves it walkable to where you can step on it. It does come back to almost factory finish. It's slightly slippery but not overly. You can still get a good grip. One or two sprays on a wheel rag coats it just fine
Keeping track of what you sprayed where is like finding the queen on a NY corner.
I think if you are a pro detailer you would probably go with an APC diluted to save some pennies..As an enthusiast I would probably use the Adams. The one I want to try next is the mckees version.. Its supposed to revitalize the mats...
Looks like the cg had a little bit more Matte look for the after, because even though the adams one foamed up it still missed more than the cg. Because they are concentrated I think it is smart to rinse first just like anything else when you was a car.
Unless you're matts are filthy, use CG directly, scrub, wait, scrub again, rinse. When dry light application and wipe off, perfection.
This is a tough test to judge, Adam's does foam up and give the illusion of a better deep clean, while chemical guys does mislead with the label. All in all, both clean well and the end result is hard to tell which cleaner was used on which mat. Thank you for the video.
Always been a Meguiars fan but as of late I’m digging the Adams products I’ve been using
Looks equal to me. You should do a test between one of these and a degreaser or APC. I usually use either an orange degreaser or strong APC like Super Clean diluted for heavy grime (3:1 or 2:1). I would be curious to see if these do a better job because in terms of price, they are a lot more expensive than a degreaser or APC which usually come to about 1$ per 32 oz bottle one diluted.
What would be a good protectant to use that would not make them slippery?
Good question. I'm still looking.
@@n9wox koch chemie gummifix is great. Non slippy
What do you use for a floor mat dressing
I like hyper dressing diluted 10:1
I bought mackees floor mat cargo liner rejuventor dont waste money on any this stuff use some apc ir paper clean brush rinse they do about same
Looks to be a tie, but I agree that Adams’s does make great rubber cleaning products
You should do a cheep vs expensive paint thickness gage!!
You got a lot of sleet and snow out in Southern California, huh?
Yes
IMO, Super Clean does better and is way cheaper
Clean with an apc them apply a thin layer of the chemical guys and it makes the weathertech mats nice and deep and nonslip no dressing I've used looks good after it dries. Too spendy to use as a cleaner as a pro.
Do some Shine supply products :)
What dressing do you prefer on mats?
Put up the Mckee's and the WeatherTech matt cleaners up against say a 5:1 APC would be interesting challenge.
Thank you so much for sharing. However, I have used another product, philisn, which I think is good and cost-effective.
Interior detail sprays both clean and leave behind UV protection so maybe that's what CG was going for. I'm really surprised even though you dropped and broke the Adams spray head the CG one didn't break on it's own. Every spray head on their 16oz bottle break immediately.
Always appreciated
Woohoo he is back !!!
How will you know wich if you mix both 😝
I use McKees
i have great results with mat renew, it does what it says, it renews.
Woo whoo Jimbo is back! And the best part is NO TURTLE WAX!
I am with you. I'm tired of all the TW propaganda vids
Looks like save the cash, get chemical guys. And the browning looks from where I see just from the oil off the payment, maybe I'm wrong.
Jumbo, MR from CG was supposedly works better once your have washed and dried them before using it. I have been applying it as a protectant and it works much better that way. Also I do wash CG MR, simply use MF Towel to wipe and let it dry naturally.
I guess when you are running a business you have to resort to work smarter and not harder due to time constraints
Adams does not recommend a pre-rinse. However you chose to disregard this critical aspect. So the product was not used as directed. This itself may have made the Adam's product less effective.
Why review a product when you don't follow basic recommended user instructions??
Perhaps re-do the video whereby Adams is used without a pre-rinse.
He could have just done both half and half. Kind of dumb
Two things…
1. Brown was from the chemical on your asphalt driveway not from the mats.
2. Should have followed directions on the bottle of products for a true fair comparison.