At 1:53 >> You can put some hot glue on the wires before covering them with the tape to be completely sure that you avoided the short circuit ... In my case you can see at 1:41 that the wires weren't so close so I covered them directly with the tape .
Im trying to make an emergency hand crank phone charger from a microwave motor connected to a standard USB cable. I would think I just need the positive and negative wires inside. (The red and black) but what is the process to deal with the green and white? I tried to just twist the green and white together and crank but that didn't show a charge. I can turn on a LED lamp with the motor so I know it works. Do I need to actually remove them from the end that plugs into the phone? I know very little about electrical but I am really wanting to learn.
You need an otg supported device , right ? Btw what should I do, if my USB has only 2 wires, that we get from power bank, only used for charging ? I'm confused with the female USB to connect ?
i made a USB OTG cable by shorting pin 4 to pin 5 just like you did, i connected a wireless mouse successfully ... out of curiosity i used the multimeter to check the voltage on the OTG cable and my phone just went dead !!! Why did this happen ?
does an official samsung charging cord work? I opened one up that had only 2 wires and u said that didnt work so im just wondering before i ruin another one
como a cer que un control de play 2 se conecte por usb es decir como ban conectados los cables del control a usb ayuda por favor de ante mano gracias este video me ayudo mucho si funciona
You're welcome ♥ 》》 Some cables pins protections are pretty hard to be opened or maybe solid from inside that's why you can't open it, look for a cable like the one i used in the video, it's pretty easy to open it.
Mr. Thinker i make it exactly like u,but it notking do, i tried to connect it with mouse/keyboard/flash disk ,but simply nothing :( i dont know what's wrong :/ ,but thank you for response :)
Ok let's determine where the people is ... First : you have to know whether your phone supports OTG cables or not, you can check that out using this app : goo.gl/4hDaqh If it supports OTG cables, then : - Get a flash driver that has a led indicator then plug it in the OTG cable and plug the OTG cable in the phone ... - If the led lighted up, then we're ok with shorting the two pins and that's a positive sign ... now all you have to do is to recheck your soldering at the female USB and surely the problem will be there ( also make sure that the wires at the micro USB end are ok and nothing got cut by mistake ) - But if the led didn't light up, then the problem is with the two pins at the micro usb end ... so you have to recheck them and make sure they are soldered together ... ☆ Hope that will help 😀
Mr. Thinker my mobile support the OTG cable, but still nothing :D ,i tried solder it again,but nothing,i trid it just for fun ,it's not importantly for me ,but if will ever need it ,i simply but it :D ,thank you for effort
At 1:53 >> You can put some hot glue on the wires before covering them with the tape to be completely sure that you avoided the short circuit ...
In my case you can see at 1:41 that the wires weren't so close so I covered them directly with the tape .
You shouldn't miss this funny video >>> 😂😂👌 >>> th-cam.com/video/Hyu0jyXXCis/w-d-xo.html
Mr. Thinker it not working for me😫😫😫😫 can send me one 😃😃😃😃😃😃😃😃😃😃😃
Mr. Thinker.
1:53
Legends know that the Soldering Iron at 0:07 is not real and is just a pic
I'm trying to make a micro USB to micro USB, both male to transfer data from one phone to another, can you tell me the wiring instructions?
Look for the data sheet of the cables your using and connect each one to other or do some research
Can we made without short two pins
Nope
Nice
Bhai kya is OTG se net use kr skte h kya mobile me connect Krke??
Im trying to make an emergency hand crank phone charger from a microwave motor connected to a standard USB cable. I would think I just need the positive and negative wires inside. (The red and black) but what is the process to deal with the green and white? I tried to just twist the green and white together and crank but that didn't show a charge. I can turn on a LED lamp with the motor so I know it works. Do I need to actually remove them from the end that plugs into the phone? I know very little about electrical but I am really wanting to learn.
hey hot to make multiple otg cable like which have two female usb ports and single usb connector
gooood technique.... Mr. Thinker...
iam from Pakistan...
I have got Dell venue 5000 series tablet and want to use creative xfi SB 1090 that has only USB that's needs power, plz help I this will support..
Can I do the same thing with iPhone or only works for android?
What if we do not sort ?
I have chargin pin with 2 wires what can i do with 2 pin wire
Thanks for your great ideas
Nice and clear video thanks buddy.
gracias por subir este tipo de material instructivo,
Just a suggestion but you should wright the name of the items you use on the subscription and in what electronic device they could be found
can the female usb adapter be the one from charger ?
Thanks for the video i love it 😍
Can you make a video how to make multiple otg?
do you have a video making otg micro usb cable with charging and otg at the same time
Very good video. Hi from Puerto Rico :)
Pls elaborate on which pins to short I'm not able to understand through the video the first two ??? Like in which orientation? ?? I'm damn confused
Yeah realy nice video, but can I just short the wires instead of the pins?
can i connnect keyboard or controllers with it ? answer quick plz
Yes, you can
bhai thanks for making thisvideo it help me a lot and i am able to use usb keyboard to control my phone and to play games thanks very much
You need an otg supported device , right ? Btw what should I do, if my USB has only 2 wires, that we get from power bank, only used for charging ? I'm confused with the female USB to connect ?
Home Projects : Thanks for using your precious time with me! Thanks!
at 1:53 use sugru instead of electrical tape or liquid electrical tape then sugru
i made a USB OTG cable by shorting pin 4 to pin 5 just like you did, i connected a wireless mouse successfully ...
out of curiosity i used the multimeter to check the voltage on the OTG cable and my phone just went dead !!!
Why did this happen ?
I just want to know if this would still work without shorting the two small pins.
Nope
Thx...its work...and very easy to make. ...I Love made at home, do my own tools. ..xdxdxd
You are the best 🤗🤗🤗
How do I make one to use it with iPhone or iPad ?
thank you so much ......i get idea by your video
Nice video .thanks H.P. please reply :which supported device .my otg note work ? thanks a lot
+Home Projects thanks a lot B for your reply and for using your time
vcc
can I do it with just electric tape because I don't have a soldering iron
How to make OTG cable without soldering : th-cam.com/video/NYdapbza8v0/w-d-xo.html
why short pins?
A little drop liquid flux does wonders'. : - )) Good Show.
I do not have the special material to shorten the two pins
is there a other way
please help
you can make that one with a lighter u can see video how to make soldering iron from lighter
Yea there is another way ...
How to make OTG cable without soldering : th-cam.com/video/NYdapbza8v0/w-d-xo.html
is this cable working in all phone ??
Non otg support phone
Gajab 😊😊😊
Muy buen video e instructivo. Gracias por subirlo.
I have seen so many videos all are using only one cable that to samsung...
Why bro u cant make with other cabels...😒
does an official samsung charging cord work? I opened one up that had only 2 wires and u said that didnt work so im just wondering before i ruin another one
+Maxmelon ... yeah, It works... (( the official one that is used for charging as well as transferring data ))
how to charge at the same time
Thank you so much
dude, it is working and it is real
Doesn't it need a resistor
Thanks for your ideas
I USED THIS FOR MY IPAD IT WORKS FOR ME！◉‿◉
and the female USB I have is kinda different I think it's an old version will still work
How to join those two points if i dont have soldering iron?
No problem, If you want to make it without soldering Watch my other video, it's titled "how to make otg cable without soldering"
como a cer que un control de play 2 se conecte por usb es decir como ban conectados los cables del control a usb ayuda por favor de ante mano gracias este video me ayudo mucho si funciona
Não era mais fácil unir os 2 fios e unir mais 1 fio e fazer 2 pontas?
If the charging pin of two wires than how to make otg cable please help me
+RAHUL kumar ... the OTG cable can't he made with the cable that has only two pins
+RAHUL kumar ...look for another one that has 4 pins ( which we use in both charging and transferring data )
I bought one out the store and it dont work. Should the device bee rooted
Please ignore this video as copyright music.
Ding Palado it is ncs (No copyright songs) . Read the Fu*king description
Whats about ios plz make a video about it plsss
Worked.thank you
nice video tho. Subing, this was easier then i thought.
nice bro 👍👍
Why do you need to short it?
So easy!!
Thanks! :D
It's Ok
I don't have soldering iron
If you have no soldering iron then there is a video of how to make this no soldering
Do I need a female adapter cant i just convert male to female.
Plz quick reply
Y e s
Lol i made did it
Unfortunately I don't have soldering pen
I have another video in my channel that will help you make it without a soldering iron, th-cam.com/video/NYdapbza8v0/w-d-xo.html
I did and I checked it's all right but it doesn't work
Thanks for information
Bhai MHL cable kaise banaye
Muito bom esse vídeo me ajudou bastante vlw !
Thanks
🙏ಓಂ ಗಂ ಗಣಪತಯೇ ನಮೋನಮಃ sri ಸಿಧೀವಿನಾಯಕ ನಮೋನಮಃ ಅಷ್ಟವಿನಾಯಕ ನಮೋನಮಃ ಮಂಗಳಮುರ್ತಿ ಮೋರಿಯ 🙏❤👉🌹ಪುಷ್ಪಗಿರಿ
Do wire se kaise connect kare
LA RESISTENCIA ?
Very nice. I'm gonna try it.
is it work on iphone
My tutorial isn't for iphones, it's just for andriod phones that use the micro usb ... it's written in the description 😀
i want to use a keyboard
so i can turn my iphone to gaming pc
Yeyy!!! Made it my self .... TY
You're welcome 😀
😍😍woow genius
How to do it if I don't have the machine ;(
I have another video in my channel that will help you make it without a soldering iron, th-cam.com/video/NYdapbza8v0/w-d-xo.html
Hi man, im from brazil
Make this with cable type C
why need to short that?
To allow the phone recognize that it's an OTG cable not an ordinary USB cable ...
Thank you for your immediate reply. I just can't open it XD
You're welcome ♥
》》 Some cables pins protections are pretty hard to be opened or maybe solid from inside that's why you can't open it, look for a cable like the one i used in the video, it's pretty easy to open it.
Mr. Thinker Thank you very much!😀😎😉
Still doesn't working for me, i tried all metodes ,but nothink
Tell me your problem, and I'll try to help 😀
But you gotta make sure that you've followed the tutorial correctly 👌
Mr. Thinker i make it exactly like u,but it notking do, i tried to connect it with mouse/keyboard/flash disk ,but simply nothing :( i dont know what's wrong :/ ,but thank you for response :)
Ok let's determine where the people is ...
First : you have to know whether your phone supports OTG cables or not, you can check that out using this app : goo.gl/4hDaqh
If it supports OTG cables, then :
- Get a flash driver that has a led indicator then plug it in the OTG cable and plug the OTG cable in the phone ...
- If the led lighted up, then we're ok with shorting the two pins and that's a positive sign ... now all you have to do is to recheck your soldering at the female USB and surely the problem will be there ( also make sure that the wires at the micro USB end are ok and nothing got cut by mistake )
- But if the led didn't light up, then the problem is with the two pins at the micro usb end ... so you have to recheck them and make sure they are soldered together ...
☆ Hope that will help 😀
Mr. Thinker my mobile support the OTG cable, but still nothing :D ,i tried solder it again,but nothing,i trid it just for fun ,it's not importantly for me ,but if will ever need it ,i simply but it :D ,thank you for effort
it is working...
Schh m kya working kerte hai
New friend dear. Nice sharing thanks.
otg cabel the reyal use pleas riplay
Sorry! What's your question?
I already make but it's not work
My usb cable is different
thank you very very very very much
You're welcome 😍😊🤩🤗
who is song
Thanks it, s work
I can't afford a female usb lol 😂😂😂😂😂
Vari good trick
Mast bro
Thank you
Vou fazer
thanks veery good
Thanks. I can get some use out of this junky old tablet that lacks bluetooth.
when I do it is not working
say very fast
Meri otg ko saxesnahi mila
nice 😘😘
mantap akhirnya berhasil juga
Make an iPhone one