Tony your killing me when you said you was trying to be a pervert you two never fail to entertain me. I never would expect the inside of that motor to look like that after running a 9.47 and winning the race. You two are a hoot, thanks for all you do. God bless and as always be safe.
Oh man congrats on the win and your first nine second time slip. That thing had to have some serious crankcase pressure with all those holes in the pistons 🤯. SBF's are tough as nails tho. My sons runs the heck out of em. Tess my daughter wants more content with you in the maverick tho shes got her heart set on one my son found for her. She just turned 12 and adores you and your cars. She said to tell you she's been praying for you every night about your medical issue🙏🏻
We will have more maverick content out soon! A couple more videos on the white car and then a bunch of maverick stuff coming out from Race Week in Trash Panda! Please tell your daughter I said thank you for the prayers!! I’m doing fantastic!! ❤❤❤
Wedge heads usually run lean over there where the intake valve is against the cylinder wall .the valve relief makes the piston weak and a lean mixture in that area is where the issue usually happens.
Bingo! The Twisted Wedge will have the same lean condition. It's not necessarily the pistons fault. I bet if air speeds were taken across the short turn and at > 0.500" lift the port is turbulent and noisy. The air and fuel are detaching and not making the short turn together. Some head "gurus" like to say, "I don't want the ai/fuel mixture late for the party"......so they get air velocities as fast as they can in hopes the "crashing" effect of the air against the longturn will re-atomize the fuel. Nope. That fuel is heavy and runs down the short side unburned. Liquid fuel won't burn. I've seen thousands of pistons blamed for this failure, but I started seeing fewer after I paid attention to the head. 100 shot ain't shit on the street or track. 3 progressive stages totalling 900 is getting there, and pistons are living.
With all the Canadiana being spoken, I was surprised that "hoser" wasn't brought into it, eh.😉 Not all the roads in Canada are good though... beware if you have to drive in Saskatchewan. Narrow and rough. Great video you two!
U"2 Have Been Getting Around, & Staying Busy With Great Friends, I'm So Proud Of Y'all's Hard Work & Dedication The Whipp Is Looking Great & Running Faster Every X,, can't Wait Too See Sum More Pull"s,, & Safe Travels,, T&T Tony & Tess ='s Dynamite Baby,, Let's Fuk"in Goo 👏🏻👏🏻👏🏻🌎💚🇺🇲👍🏼👍🏼👍🏼👍🏼 😎👌🏼💨💥🤟🏼🤟🏼
So 13:1 AND a Procharger (maybe) ? I was thinking for a second that Tess has one from the black car, but realized it likely got smooshed in the uh-oh you had ? That was a sad day. Anyway, it sounds like Sick Week might be the next time we hear from you two, so have fun in the meantime !!
I had a crank driven F3R-112 on the black car, it got crunched in the crash, but the internals were still ok, so they’re using my spare parts to make a 136 for the next car. The white car would be killer with their new P1R that just came out!
@MissMidnightMaverick Yes I remember that because you'd just gotten done changing out the drive on it or something that same crash day I think ? I'm not up on all the model numbers, but I'm sure you know what you're doing. I've always thought turbos were more efficient because they don't draw any power from the engine, but I know they're totally different to work with. I really enjoy watching you two doing what you do and just living your lives to the fullest--AND WITH FORDS !! I'll be over here in N.H. freezing while you're doing Sick Week 🤨! And living vicariously through you all 🙂
Sorry Tony,you need new piston’s and rod’s,lol. Blown up and still ran good,must be a fawd thing hahahaha. Yes. K1. I need a balanced rotating assembly ASAP!!! Eagle? Callie’s? Anyone? Procharger HELP!!!!
Poor Tess . She looks so worn out ….. the procharger is the way to go…. Happy Birthday Tony!!!!!!! I would love to try these special beef and noodles…… they must be magical!!!!!!! Keep up the great videos
That old woman is wore out going for rides all across the world to get free parts and shill for companies for said products. She has no integrity. A trashy woman
Tony I know you're saying that parts of the Piston is what bent those spark plug straps, I was wondering do you index your spark plugs I was having a problem with my spark plug straps being hit by the piston and I indexed them and the problem went away but those were on world product heads but now I have the afrs and I never had that problem and I didn't index him anymore and like I said I got a big dome piston just curious that's all keep up the good work
Tony what kind of Pistons were those I also have a small block Ford and my bottom end is pretty much stock with ARP stuff but I got like speedpro forged dome pistons in it I got the afr 205 58 CC renegade race heads I got a Comp Cam 613 solid roller with 264 duration at 0.50 it's a pretty nasty little motor and I got a 200 shot on it but I have not tested yet the other question is I see you got a 1. 7 rocket ratio I'm still using the 1.6 because I figured with the dome piston and the bigger valve that it would hit but it didn't and now I'm kind of mad that I didn't go with the 220 head over the 205 so I know you don't really want to give out the combination but I'm just curious because maybe I can put 1.7 push rods and mine I'm just trying to figure out if something of yours I can make mine work a little better obviously I think you have a stroker motor mine's only a 302 60 over anyway keep up the good work and and have fun cuz that's all what it's about in mine
You folks hear of 2 FR9's up for sale? I had 2 grow legs in Northern Vermont and have scoured the internet looking for them being sold. I purchased them from a race team in New England. Been getting the ghosting from anyone that would possibly contacted from a thief selling them. Not to happy with a place in Charlotte North Carolina blocking me just for asking if anyone's contacted them. You ever need a bulletproof 347 built the trike in my FB thumbnail has been beat on and stìll just as stròng.
I stay away from the sauce these days, it's just hard on the motor Even when it's built for it. Btw, Billy may forgot to torque that last rod cap down, he had covid when he put that motor together 😂
Wow those Covid knockoff pistons must have been 4 for price of 1 online sale. Hard to believe you just ran in the 9's and the motor looks like that afterwards.
I don’t know how it was still running as good as it was, but we knew the pistons were going to be weak when we put them back in, just hoped they would last a little longer than they did.
Yes Tony the Blackbird was the fastest airplane in the world but I believe they're messing around with supersonic now I was watching something on the History channel or one of them channels and they were talking about it
I don't know I thought you guys beat on that motor for quite a while I mean it didn't use nitrous alot a couple times really but still for NA it got beat on pretty good
We will see if he has learned from 4 years ago, lol right, I hope he doesn’t start that tariff talk, right, that just cost us money every time he used to say it four years ago ,lol thanks, BigAl California, p.s. watch out for those trick flow performance parts ,, roller lifters beams that hold them together a bar that holds them together popping off the heads and turning the roller solid lifter side ways, ok, thanks BigAl California
Telling a grown man to repeat himself, and then proceeding to tell him how to speak and what words he's allowed to use, when he's referring to an inanimate object at that... lol wow. At least you're nice to look at.
I'm not sure but I can't wait to see the video you guys are awesome and amazing and I am always rooting for you too,, T&T is dynamite Tony and Tess baby👏🏼👏🏼👏🏼💚😎👊🏻🗯💥🤟🏻🤟🏻
Tony your killing me when you said you was trying to be a pervert you two never fail to entertain me. I never would expect the inside of that motor to look like that after running a 9.47 and winning the race. You two are a hoot, thanks for all you do. God bless and as always be safe.
🎉 HAPPY BIRTHDAY TONY
You guys have been uploading like crazy recently keep it up guys awesome
We still have one more coming this week! All this time off has given me time to catch up on editing!
I'm loving the ride along. Your videos always bring a smile to my face, and sometimes a good laugh. Thank you. Safe travels.
Oh man congrats on the win and your first nine second time slip. That thing had to have some serious crankcase pressure with all those holes in the pistons 🤯. SBF's are tough as nails tho. My sons runs the heck out of em. Tess my daughter wants more content with you in the maverick tho shes got her heart set on one my son found for her. She just turned 12 and adores you and your cars. She said to tell you she's been praying for you every night about your medical issue🙏🏻
We will have more maverick content out soon! A couple more videos on the white car and then a bunch of maverick stuff coming out from Race Week in Trash Panda! Please tell your daughter I said thank you for the prayers!! I’m doing fantastic!! ❤❤❤
Impressive it ran so good!!😮
Right?? I don’t know how it went a 9.47 down a hole!
@@MissMidnightMaverick Car Gods all I can say !!!! Great video guys
@@MissMidnightMaverick sounds like the car should be capable of 9.0s 9.teens as it sits. Impressive as hell.
Wedge heads usually run lean over there where the intake valve is against the cylinder wall .the valve relief makes the piston weak and a lean mixture in that area is where the issue usually happens.
Bingo! The Twisted Wedge will have the same lean condition. It's not necessarily the pistons fault.
I bet if air speeds were taken across the short turn and at > 0.500" lift the port is turbulent and noisy.
The air and fuel are detaching and not making the short turn together. Some head "gurus" like to say, "I don't want the ai/fuel mixture late for the party"......so they get air velocities as fast as they can in hopes the "crashing" effect of the air against the longturn will re-atomize the fuel.
Nope. That fuel is heavy and runs down the short side unburned. Liquid fuel won't burn.
I've seen thousands of pistons blamed for this failure, but I started seeing fewer after I paid attention to the head.
100 shot ain't shit on the street or track. 3 progressive stages totalling 900 is getting there, and pistons are living.
“You already found that hole” 😂
Happy Birthday Tony!
Happy Birthday Tony!!!
I just don't understand why none of y'all ever use a Air or Battery powered Ratchet 😮😮
A lot of the bolts on that car are titanium and I don’t use anything but a normal ratchet. We use an impact on the intake and heads
Happy birthday tony🎉 Much love from Australia 🇭🇲
Nice vid congrats on your win. Kashus shop looks as clean as his car and love his nice ratchets and some of his tools. Class act to the both of ya
Beef and noodles and some strong Italian hands will save all
What an episode, all those beautiful fords
I'm a bit under the weather, this should pick me up!
@@ronpriest9803 oh no! I hope you start feeling better soon!!
@MissMidnightMaverick thanks! Just a cold this time. Last month I had that fake china virus 🤣
Radio you want ice cream or pie? I want boff! It was boff.
Boffum. Definitely boffum.
With all the Canadiana being spoken, I was surprised that "hoser" wasn't brought into it, eh.😉 Not all the roads in Canada are good though... beware if you have to drive in Saskatchewan. Narrow and rough. Great video you two!
29:00 All of those sharp edges should have been removed from the pistons, thats engine building 101 especially with nitrous.
Yep. That is just dumb@ss junk.
Whole shaft rockers I know where this is going😂❤❤uall have a beautiful Thursday night get it Tony 🏁💪🏼yes Tess 💕
DONT blame the nitrous,i run hundreds of bottles through a good ford motor!
You are looking great hun hope you feel better
Busting your titanium nuts about your titanium bolts!😆😆 is that okay! LMAO!!
Wait wait WAIT! Where the hell did Tony find a calculator watch!?! I haven't seen one of those in working condition since the late 80s
Hahaha, him and Kevin from Red Horse are Casio dudes! Tony’s doesn’t fit too well over those big wrists though 😂
U"2 Have Been Getting Around, & Staying Busy With Great Friends, I'm So Proud Of Y'all's Hard Work & Dedication The Whipp Is Looking Great & Running Faster Every X,, can't Wait Too See Sum More Pull"s,, & Safe Travels,, T&T Tony & Tess ='s Dynamite Baby,, Let's Fuk"in Goo 👏🏻👏🏻👏🏻🌎💚🇺🇲👍🏼👍🏼👍🏼👍🏼
😎👌🏼💨💥🤟🏼🤟🏼
Omg he is a small version of BIG cheif for sure we shall call him lil cheif
Tony is a beast holding that engine hoist up!!!!
👀🦾🦴🤤 @ 1:47 GAWD DAMN TONY!!!!
So 13:1 AND a Procharger (maybe) ? I was thinking for a second that Tess has one from the black car, but realized it likely got smooshed in the uh-oh you had ? That was a sad day. Anyway, it sounds like Sick Week might be the next time we hear from you two, so have fun in the meantime !!
I had a crank driven F3R-112 on the black car, it got crunched in the crash, but the internals were still ok, so they’re using my spare parts to make a 136 for the next car. The white car would be killer with their new P1R that just came out!
@MissMidnightMaverick Yes I remember that because you'd just gotten done changing out the drive on it or something that same crash day I think ? I'm not up on all the model numbers, but I'm sure you know what you're doing. I've always thought turbos were more efficient because they don't draw any power from the engine, but I know they're totally different to work with. I really enjoy watching you two doing what you do and just living your lives to the fullest--AND WITH FORDS !! I'll be over here in N.H. freezing while you're doing Sick Week 🤨! And living vicariously through you all 🙂
Sorry Tony,you need new piston’s and rod’s,lol. Blown up and still ran good,must be a fawd thing hahahaha. Yes. K1. I need a balanced rotating assembly ASAP!!! Eagle? Callie’s? Anyone? Procharger HELP!!!!
HAPPY BIRTHDAY BRO! PEACE ✌️
Happy birthday Tony
Poor Tess . She looks so worn out ….. the procharger is the way to go….
Happy Birthday Tony!!!!!!!
I would love to try these special beef and noodles…… they must be magical!!!!!!!
Keep up the great videos
That old woman is wore out going for rides all across the world to get free parts and shill for companies for said products. She has no integrity. A trashy woman
Tony understands the assignment 🤣🤣 Happy Birthday dude 🫡
Tony I know you're saying that parts of the Piston is what bent those spark plug straps, I was wondering do you index your spark plugs I was having a problem with my spark plug straps being hit by the piston and I indexed them and the problem went away but those were on world product heads but now I have the afrs and I never had that problem and I didn't index him anymore and like I said I got a big dome piston just curious that's all keep up the good work
Temu Chief😂
😂🤣😂
MO POWER build better this time, find all the weaknesses and make stronger 👍
50 shot never hurt anything!😅
just cheap pistons
,lol
Definitely lil chief, just watched their video before this one. lol Tess you need to get Miss Vicki to post her beef & noodles recipe please.
That recipe is sacred and can only be enjoyed at Bill and Vicki’s house! Haha.
That. Sucks. It will. Be. Better and. Bader fresh. Girl 👍
Tony what kind of Pistons were those I also have a small block Ford and my bottom end is pretty much stock with ARP stuff but I got like speedpro forged dome pistons in it I got the afr 205 58 CC renegade race heads I got a Comp Cam 613 solid roller with 264 duration at 0.50 it's a pretty nasty little motor and I got a 200 shot on it but I have not tested yet the other question is I see you got a 1. 7 rocket ratio I'm still using the 1.6 because I figured with the dome piston and the bigger valve that it would hit but it didn't and now I'm kind of mad that I didn't go with the 220 head over the 205 so I know you don't really want to give out the combination but I'm just curious because maybe I can put 1.7 push rods and mine I'm just trying to figure out if something of yours I can make mine work a little better obviously I think you have a stroker motor mine's only a 302 60 over anyway keep up the good work and and have fun cuz that's all what it's about
in mine
thx guys
You folks hear of 2 FR9's up for sale? I had 2 grow legs in Northern Vermont and have scoured the internet looking for them being sold. I purchased them from a race team in New England. Been getting the ghosting from anyone that would possibly contacted from a thief selling them. Not to happy with a place in Charlotte North Carolina blocking me just for asking if anyone's contacted them. You ever need a bulletproof 347 built the trike in my FB thumbnail has been beat on and stìll just as stròng.
Oh man dude does look just like a mini chief!! 😂
Happy late birthday
Should of had uncle bob fix the motor in it and when we get to see the new motor in it and content of the event that the old man put on in edge water
The motor was fixed for Edgewater and the car was there
Thanks for everything you share with us
No it's Richard at 660 Street
What does Tony do for a living
Wow! Cast pistons stood up to Tony's abuse? Unbelievable!
Happy birthday Tony!! You know those put grey in your beard??Nice video guy's!
Lunch! Where are you?
I stay away from the sauce these days, it's just hard on the motor Even when it's built for it. Btw, Billy may forgot to torque that last rod cap down, he had covid when he put that motor together 😂
@6:50 titanium bolt by Tess falls inside of engine bay
Does Tony buy his Pistons from JC Whitney 😂
lol harbor freight..
but I didn’t buy them
"PUH-VERT"
You guys even get personalized tfs heads!
These are the first 227s ever made and they have are logo on them so we can test them
Thanks for the video guys!
Is the block a ford production block or aftermarket?
Wow those Covid knockoff pistons must have been 4 for price of 1 online sale. Hard to believe you just
ran in the 9's and the motor looks like that afterwards.
I don’t know how it was still running as good as it was, but we knew the pistons were going to be weak when we put them back in, just hoped they would last a little longer than they did.
Good video
So it’s still a 410?
Yep
Exprezzo tiddy titanium Tonyz
Yes Tony the Blackbird was the fastest airplane in the world but I believe they're messing around with supersonic now I was watching something on the History channel or one of them channels and they were talking about it
Hello from north Carolina my friends 👋
Hellooo!
Will you be coming back Canada in the future?
Oh absolutely!
Are they forged pistons
What kind of rods are you running in it could have stretched a rod as well
The rods are good, the motor is already fixed
Hell yeah
Since you like Ford motors you need to have Tony Bischoff build one they make 1000 hp on motor
This motor makes plenty for a stock block Windsor. Uncle Tony is a great engine builder and so is cams. They did a wonderful job fixing this motor
@@avboysgrandpahollywoodThrows some boost at it.
I don't know I thought you guys beat on that motor for quite a while I mean it didn't use nitrous alot a couple times really but still for NA it got beat on pretty good
Small Chief 😂
He is a look alike 🎉
Hi Tess. Can you please tell me what wheels are on the white Mustang, particularly the front ones? Thank you
Was it the nitrous or junk parts...
Where do you buy foul nitrous ?
Hehe jus trolling ❤
Change the carpet. Lol
You been losing weight? Look beautiful girl!
It won't let me like the video
That's not a piston prob. It's def the tune up.
I’m pretty sure the spark plugs tell a different story there.
Put a good set of good JE pistons in it
No we don't/ are not pulling out 😂
A/f and timing?
Tony when will we see Grey mare racing again.
What do you guys do for a living
That’s a big block ford?
Small block
We will see if he has learned from 4 years ago, lol right, I hope he doesn’t start that tariff talk, right, that just cost us money every time he used to say it four years ago ,lol thanks, BigAl California, p.s. watch out for those trick flow performance parts ,, roller lifters beams that hold them together a bar that holds them together popping off the heads and turning the roller solid lifter side ways, ok, thanks BigAl California
Could it be a heavy foot?😊
Well when you race you try and go as fast as you can.
Let's Goooooo
Are you guys not at SEMA ?
We’re here! Going to the show Thursday and Friday.
@ what booth would you guys be at?
We’re going to be at the ACT booth both days from 11-12 I think booth number 23633.
I am going to make a projection I will see one of you when I go home to see family you all live close to one of my brothers
Ugh I missed it
😎🏁🤙🇺🇲🔥
WIX FILTER ON A FORD MOTOR NEVER TONY, ALWAYS
USE OG MOTORCRAFT YOU WILL NEVER GO WRONG
Telling a grown man to repeat himself, and then proceeding to tell him how to speak and what words he's allowed to use, when he's referring to an inanimate object at that... lol wow. At least you're nice to look at.
Wrong tune up. 😢
Baby Chief! Trump 2024🇺🇸
Trump 2024 flag 👍
In Canada too lol
LOVE THE TRUMP FLAG ON THE WALL !!
Just Canadian things lol its everywhere in garages in Windsor lol
Brrrppppp
I'm not sure but I can't wait to see the video you guys are awesome and amazing and I am always rooting for you too,, T&T is dynamite Tony and Tess baby👏🏼👏🏼👏🏼💚😎👊🏻🗯💥🤟🏻🤟🏻
Timing was too hot
Happy Birthday Tony