Unveiling all the NEW Harbor Freight Tools At SEMA 2024!

แชร์
ฝัง
  • เผยแพร่เมื่อ 24 ธ.ค. 2024

ความคิดเห็น • 589

  • @harborfreight
    @harborfreight หลายเดือนก่อน +217

    We loved showing you guys around our booth!

    • @skroesen
      @skroesen หลายเดือนก่อน +5

      Question on the powerstations. Do you have plans to integrate them with the inverter generators similar to what Ecoflow does where the generator auto starts to charge the power station when the power level reaches a threshold?

    • @jrac863
      @jrac863 หลายเดือนก่อน +2

      When should we see all the new icon pliers in stores?

    • @Boilerking76123
      @Boilerking76123 หลายเดือนก่อน +3

      Will the power packs charge on the solar panel while being used for a load?

    • @wIzKid16100
      @wIzKid16100 หลายเดือนก่อน +1

      Icon trim tool next

    • @411Adidas
      @411Adidas หลายเดือนก่อน +4

      Our only harbor freight within 200 miles is pretty small and doesn't get a ton of stock. Every time they run deals, I miss out on it because they only have three or four of every item.
      They were running the Daytona buy four dollys get the rack for free deal recently. Welp the store only had two dolly's and wouldn't rain check the rest, so I couldn't even buy the deal they were advertising!!
      And of course you can't buy 75% of the items online ( in store only ) to ship it anywhere, so once again I was sol.
      They really need to figure out a better way we can apply the deals on the website where items are actually in stock.
      Then just allow us to ship it to the store for us more rural areas that have to drive 100 miles one way.

  • @MeachPango
    @MeachPango หลายเดือนก่อน +24

    Dude, harbor freight is legit top of the line now. Anyone that still hates on icon and all that havent been there in the last 5 years.

    • @philh9238
      @philh9238 หลายเดือนก่อน +2

      The tools look good to me

  • @Invertedworldx
    @Invertedworldx หลายเดือนก่อน +9

    So amazing how far harbor freight has come as a company with affordable tools and so many options for any situation needed

    • @GT-43
      @GT-43 29 วันที่ผ่านมา

      Thats because they pay attention and make the design changes to their products that the customers want.

  • @patricsturm5473
    @patricsturm5473 หลายเดือนก่อน +124

    Dude fern was spitting facts about those generators that even that rep didn’t know

    • @benratliff9157
      @benratliff9157 หลายเดือนก่อน +2

      When fern asked about bridging the circuits the rep was like “wait what? You can’t do that” 🤣

    • @imbue69
      @imbue69 หลายเดือนก่อน +2

      Sadly a lot of brands have sales ppl like that and in manufacturing

    • @jordanhensley5713
      @jordanhensley5713 หลายเดือนก่อน

      5000 watts / 240 is 20.8 amps just fyi. Idk were he gets that bridging stuff from. i mean maybe you can do some janky shit where you run the potential of burning stuff down. a 5000 watt genhead is rated at 5000 watts. you're not squeezing more out of it without damaging your generator. i do know that some inverter generators have sync modules where if you have two of them you can sync them together and you can double your output. but bridging? i don't even know what that is / does or what he's talking about. does he mean that he can use both outlets? i mean yeah you can use both outlets but your not drawing more that 20.8 total between both outlets without it tripping out on over-current protection.

    • @ελευθερία-ε2ο
      @ελευθερία-ε2ο หลายเดือนก่อน +3

      @jordanhensley5713
      First of all, ALL predator gens are 120v except the 9500, that's 240v 30A. IDK where you get 240v on the 5000. You can't double voltage bridging two outlets using a 120V generator 😂.
      Second: ALL generator numbers are starting watts, not running watts. The 5000 is actually 3900 running watts. So, 3900/120=32.5A.
      A little lesson on bridging a 120V generator. When using the two outlets, you don't use the two hot wires. One outlet becomes positive. The second outlet becomes negative. That's how you double your amps.
      This is all electrical 101. Simple knowhow and no risk of burning anything. My boy in the vid was correct, JORDAN.

    • @zslemp
      @zslemp หลายเดือนก่อน

      @@jordanhensley5713 they are inverter generators

  • @MagaRickn
    @MagaRickn หลายเดือนก่อน +75

    Fun to watch. I wish HF would add a Thread Chaser Kit, not tap and die, but a true thread chaser for us that rebuild old cars and engines!

    • @HedgeMaster26
      @HedgeMaster26 หลายเดือนก่อน +2

      Amen to this. Their Nut SetterI just bought, looking to use it here in the future.

    • @veganpotterthevegan
      @veganpotterthevegan หลายเดือนก่อน +4

      @MagaRickn they're not gonna have everything. They make their money by selling a lot of volume. They'd sell 2 of those per state every year🤣 It would need to be expensive

    • @rogerdedrick373
      @rogerdedrick373 หลายเดือนก่อน +2

      Amazon has them in spades

    • @ericpleasant7722
      @ericpleasant7722 หลายเดือนก่อน +2

      @@veganpotterthevegan Me and every other mechanic I know have the Snap-On rethreading kit. It's a very popular tool!

    • @anythinggoesgarage5943
      @anythinggoesgarage5943 หลายเดือนก่อน +1

      yes!!!!!! Been looking for an affordable one.

  • @fernsbbq
    @fernsbbq หลายเดือนก่อน +140

    Yesterday was one of my favorite days with Ryno. Allowing me to take the segment and learn more about the predator generators. I got very excited, because I know how this product works out in the field. this product is worth every penny and the output and longevity is well worth it. As you could tell, I was really excited. If only they had barbecues there, I would have just as much exciting. Thank you, Harbor freight for allowing me to come and ask questions.

    • @TheOne-yc1wt
      @TheOne-yc1wt หลายเดือนก่อน +1

      @fernsbbq Fernandooooo! You gotta start putting up some videos, im sure alot of us would love the content!

    • @Bumpertrash1
      @Bumpertrash1 หลายเดือนก่อน +3

      Fern still selling the predator.. harbor freight should sponsor you lol

    • @fernsbbq
      @fernsbbq หลายเดือนก่อน

      @@Bumpertrash1ha ha not looking for sponsorship. I was stoked I got to see the new product. YES I will be upgrading mine when it comes out. Gotta WORKFORIT

    • @curseoftheblackpearl7497
      @curseoftheblackpearl7497 หลายเดือนก่อน +2

      @fernsbbq you were a natural at the interview

    • @johnroberts4823
      @johnroberts4823 หลายเดือนก่อน

      Im seeing on the HF website, the Predator 224 engine is failing. I passed on buying one for my mini bike! Why not work on that?

  • @aaronsmith593
    @aaronsmith593 หลายเดือนก่อน +7

    Those car jacks have doubled in price, not surprised, everything has doubled in price these days. But Harbor Freight is still trying their best to keep their prices affordable.

  • @wolfhound1a
    @wolfhound1a หลายเดือนก่อน +29

    Locking flex heads!!! YES! It's about damn time!

    • @danp7463
      @danp7463 หลายเดือนก่อน

      I love my flex head ratchet. It doubles as a speed handle. I prefer the screw that secures the head to the handle to be on the tighter side that way if I need to use it with an extension and crow's foot flare nut socket it's no problem.

  • @Jay-Kaizo
    @Jay-Kaizo หลายเดือนก่อน +13

    I went to harbor freight for the first time a month ago. Finally came across one when looking for a fed ex drop off. Such an awesome store. I've been back 5 times lol

  • @kennak476
    @kennak476 หลายเดือนก่อน +5

    I was always a Northern Tool guy for yrs, Harbor Freight has some really nice stuff and upped their game since they entered the market!

  • @Flynn_Stones
    @Flynn_Stones หลายเดือนก่อน +16

    I been waiting for a lot of these since the last SEMA show, but glad to see they're not abandoned at least

  • @gmans7859
    @gmans7859 หลายเดือนก่อน +6

    Thanks Everyone. That was Fun. Super Excited as I am a Tool Nerd. Wants over Needs in no particular order.

  • @hksupra6745
    @hksupra6745 หลายเดือนก่อน +42

    My favorites have got to be the generators and power stations.

  • @Biokemist-o3k
    @Biokemist-o3k หลายเดือนก่อน +4

    As a hobby welder I have a Miller bobcat 225 NT and I love the new essentials that Harbor freight has. Those Bessie clamps look like they are made really well and I am definitely buying of those welding tables...I am starting a build of a 1928 Morgan/GN special hillclimb racer, (A 3 wheeler with 4 wheels) and it will be video'ed and put on TH-cam in a few months along with the build of a 1935 Bugatti restoration.....Love that new trailer also...

  • @StillLivinginthewoods
    @StillLivinginthewoods หลายเดือนก่อน +3

    The main takeaway here is that the folks down at HF are very excited this year.
    Hahaha! Love HF and glad to see them updating their products...I just hope they don't forget their roots and let the prices get too out of hand.
    I have no interest in any "high end" tools from HF... not even a little bit.

  • @deeeyewhy5949
    @deeeyewhy5949 หลายเดือนก่อน +9

    A lot of us are still waiting for those slip joint talon grip long nose pliers that were supposed to drop in spring ‘24 now it’s closing in on the end of autumn. Also we know hf is working on a slide top cart why wasn’t a prototype available for display?

  • @kaytate7533
    @kaytate7533 หลายเดือนก่อน +2

    Thanks for showing your products. Big fan of Harbor Freight!

  • @diytoptricks
    @diytoptricks หลายเดือนก่อน +19

    The new Harbor Freight tools are impressive this year! The Badland Jack with its controlled descent feature is a game-changer for off-roaders. Can’t wait to see this in action!

    • @veganpotterthevegan
      @veganpotterthevegan หลายเดือนก่อน

      @@diytoptricks I wish my overlander were big enough to store that thing. Maybe it can replace the maxtrax on my tire🙃

    • @thom17043
      @thom17043 หลายเดือนก่อน +3

      They need to expand the controlled descent to all their jacks!

    • @Psyco913
      @Psyco913 หลายเดือนก่อน +2

      I like the idea of descent control on a regular floor jack, but the off-road jack is where it's least necessary. If your rig can't handle a 1 foot drop you maybe shouldn't have taken it off-road to begin with.

    • @thom17043
      @thom17043 หลายเดือนก่อน +2

      I can understand that, but I can also understand trail repairs in less than ideal conditions where I would rather not dislodge the vehicle with heavy handed actions.

  • @whirledpeaz5758
    @whirledpeaz5758 หลายเดือนก่อน +3

    I recently bought the Predator 5000 on sale for $850, love to pair it with one of those power stations.

  • @bruceaugustine6486
    @bruceaugustine6486 หลายเดือนก่อน +1

    Does the flooring come with the trailor? What is the weight rating in the trailer? are you planning a duel wheel reailer?

  • @FatBoyBrett
    @FatBoyBrett หลายเดือนก่อน +3

    Where is the icon ratcheting flex head & bit set with the sockets included in the set? 4:46 it’s on the shelf. It was suppose to come out this past spring/summer.

  • @caseymac2014
    @caseymac2014 หลายเดือนก่อน +21

    I have a feeling that the WorkForit Crew Christmas list is not going to Santa but to Harbor Freight. 😂

  • @johnfowler6600
    @johnfowler6600 3 วันที่ผ่านมา

    Been waiting for the mini tool boxes to hit the stores, major craftman tool boxes up till now. I plan on using the mini for airbrush tools just the right size for fine working of hobbies without searching for certain tools in big box.

  • @John-bx8km
    @John-bx8km หลายเดือนก่อน

    Love Harbor Freight tools. Been buying them way back in the 80's when I worked back East. Everything was bought by catalog. Nowadays Harbor Freight stores are in just about every major area. All the new lines of power tools are a great buy at a great cost.

  • @samgonzalez509
    @samgonzalez509 หลายเดือนก่อน +12

    Thanks for introducing Athena. Best of luck with projects

    • @UncleFjester
      @UncleFjester หลายเดือนก่อน

      Vegas Hookers! Last week her name was, Alexa

  • @zacharygregory2053
    @zacharygregory2053 หลายเดือนก่อน +3

    All of those pliers look like Snapon

  • @zabbas870
    @zabbas870 หลายเดือนก่อน +8

    I didnt see any tools all i saw was a yellow skirt

  • @wildwestunlimited
    @wildwestunlimited หลายเดือนก่อน +8

    I DO love me some Harbor Freight!!.... I LOVE the fact that Harbor Freight gives the DOUBLE middle finger to all the BIG HIGH DOLLAR tool manufactures basically saying, "Thank you for putting SUCH a HIGH price on your crap..... WE can make it better, stronger and WAY less expensive!" .... While saying that, not ALL tools are like that, but I appreciate the company because they target customers like ME, the guys who just needs a specific took and I might use every 2 or 3 months, not every day. Awesome company, Awesome business plan!!!

  • @BoBo-SpackleMunkey
    @BoBo-SpackleMunkey หลายเดือนก่อน +1

    Does or will Harbor Freight provide a vendor list of all items that are American Made? We will be setting up new facilities for our various programs & projects and are committed to made in America 🇺🇸

  • @piercehawke8021
    @piercehawke8021 หลายเดือนก่อน

    26:03 def caught my attention; especially with more and more communities depending on riskier traditional power grids.

  • @siggydoo
    @siggydoo หลายเดือนก่อน +4

    When is the ICON 3/8in electronic torque wrench coming out?

  • @nstooge
    @nstooge หลายเดือนก่อน +5

    I can remember when Sears/Craftsman had all the awesome tools. Maybe one day it’ll happen again.

    • @gambinogotti1246
      @gambinogotti1246 หลายเดือนก่อน +1

      Those days are long gone , unfortunately

  • @justingomez1043
    @justingomez1043 หลายเดือนก่อน +1

    hercules needs to make a 20v dynafile or a 12v dynafile. welding stainless tubing i use it alot

  • @smnkm4ehfer
    @smnkm4ehfer หลายเดือนก่อน

    NGL, you know why I clicked, and I'm glad you did it. Should be called little miss baddie. Cute little chick that does something more badass than most guys is def cool af. Didn't know she existed b4 this but now I've gotta see her work

  • @ryanmelvey8764
    @ryanmelvey8764 7 วันที่ผ่านมา

    Thanks for making portable bandsaw. Just what I need

  • @jburners20
    @jburners20 หลายเดือนก่อน +3

    I’m pretty sure there are still plenty of tools that never came out from last years SEMA showcase. I want to be excited for the ratchets but idk if they will ever come.

  • @blown503
    @blown503 หลายเดือนก่อน

    so these Vulcan tig welders are they able to water cool?

  • @Rakkadeedoo
    @Rakkadeedoo หลายเดือนก่อน

    What is the difference between the new 5000 silent generator and the previous year's? Thanks!

  • @jamestaylor1078
    @jamestaylor1078 หลายเดือนก่อน +1

    Take a shot every time you hear the word. Excited!

  • @jjomnt7102
    @jjomnt7102 10 วันที่ผ่านมา

    WOW harbor freight is completely stepping up its game 👍👍👍

  • @danw1089
    @danw1089 หลายเดือนก่อน +7

    The problem with harbor freight when it comes to welders or generators is you can’t buy replacement parts and they don’t service them

    • @ductape8214
      @ductape8214 หลายเดือนก่อน +1

      Doesn’t hf do lifetime warranty

    • @danw1089
      @danw1089 หลายเดือนก่อน +4

      @ not on welders or generators,

    • @puckcat22679
      @puckcat22679 หลายเดือนก่อน

      Check their replacement parts website... They do in fact sell parts for them. It sucks that they have to be ordered by calling their 800 number, but parts are available for those things.

    • @danw1089
      @danw1089 หลายเดือนก่อน

      @ consumables and drive rolls , aren’t what I consider being “repairable” if it has any type of electronic failure like a circuit board problem or lcd display it’s a basically a paper weight

    • @shawnsderbyden1032
      @shawnsderbyden1032 หลายเดือนก่อน +1

      If you do a little bit of finger walking on google or even Amazon you can pretty much find whatever part you need for the welders and generators might not be the same name but it’s the same part and you can find upgraded parts as well granted there probably isn’t parts for everything for every model but close to every part and honestly the parts you can’t find are parts that either don’t break enough to make it worth making replacements for or if they break your probably better off buying new at that point when they break those said parts

  • @RenBobbins
    @RenBobbins หลายเดือนก่อน +1

    Harbor Freight is implementing the “frog in the boiling water” technique with their customers. Icon started out cheaper than Gearwrench and Milwaukee (hand tools). Over the past two years, their prices have gone up quite a bit, but they’ve done it slowly enough that the unobservant customer doesn’t even notice.

    • @DMAXRYNO
      @DMAXRYNO  หลายเดือนก่อน +2

      Literally everything has increased in price over the past two years with all of the inflation…. Of course their tools will too.

    • @ACommenterOnYouTube
      @ACommenterOnYouTube หลายเดือนก่อน +1

      its called INFLATION kid ...
      EVERYTHING has gone UP in price NO thanks to Biden ....

  • @nickfilippelli1344
    @nickfilippelli1344 หลายเดือนก่อน

    I was sad they didnt show off the cordless 20V rachets! BEEN WAITING SO LONG!!!!! Thank your for recording in 4k so I could pause to see the 20v rachets :) :) :)

  • @Cg41418
    @Cg41418 27 วันที่ผ่านมา

    Gotta say..I bought their cheap spray paint gun and roof nailer. Both were super inexpensive and worked, and are still working incredibly.

  • @KadenHigginbotham
    @KadenHigginbotham หลายเดือนก่อน +1

    i’ve been holding back on buying a snapon $300 long 1/2 ratchet because i knew HF was going to release one, boy i’m excited

  • @nottodead
    @nottodead หลายเดือนก่อน +3

    The new mini Toolboxs are amazing!!@

  • @dsbennett
    @dsbennett หลายเดือนก่อน

    I always have to set a big weight on my trailer tongue to keep it from tilting when I’m unloading so this stabilizer idea is genius.

  • @technicaltrucking8704
    @technicaltrucking8704 หลายเดือนก่อน +1

    those electrical icon pliers look like the snap on brand tools, love to see some comparisons

  • @MadSon1901
    @MadSon1901 หลายเดือนก่อน +3

    I'm glad they're bringing the worm-drive circ out, but man was I hoping for some Herc nail guns.

    • @BodillMan-tj3xk
      @BodillMan-tj3xk หลายเดือนก่อน

      Metabo 18v 21 deg and 30 degree framing nailer kit(gun,4ah bat, charger and carrying soft case) on sale at Lowe's 279$to 319$ depending on your state and availability. I've had my 30 degree for a couple of weeks and am thoroughly impressed . Get brushless impact driver kit with 2 2ah batts charger and case for another 79$to119$ depending on which model impact for the batteries. Those 3 batts will shoot 1800 to 2000 nails and the smaller battery will be 85 percent charged in 30 mins.. Its 100 percent worth checking out because they have lifetime warranty on ALL their cordless tools. I LOVE Hercules and now I love this metabo framing nailer nailer

  • @ridinrocks
    @ridinrocks หลายเดือนก่อน

    The home backup gene 11500 is that starting watt or running watt

  • @ste-bow
    @ste-bow หลายเดือนก่อน +2

    Still waiting for the Icon bit set with sockets.

  • @Nothingtoya
    @Nothingtoya หลายเดือนก่อน

    As for the locking flex head, Gearwrench really has this figured out.
    It's good to see HF still updating their tools.

  • @turbro7185
    @turbro7185 หลายเดือนก่อน +7

    STILL WAITING ON LAST YEARS ICON SEMA TOOLS ??!!!!

  • @beowulfgrendel24
    @beowulfgrendel24 หลายเดือนก่อน

    Are the predator power packs stackable like ankler and eco flow?

  • @cheapme1850
    @cheapme1850 หลายเดือนก่อน +1

    Last few tools I needed were cheaper at Menards or not even available at HF.

    • @BodillMan-tj3xk
      @BodillMan-tj3xk หลายเดือนก่อน

      Then why watch HF video ? Just shop at Menards and don't hate. Simpl

    • @cheapme1850
      @cheapme1850 หลายเดือนก่อน +2

      @ Smh. I watch to get INFORMATION about HF tools to compare. I guess you just blindly buy HF stuff. I shop HF all the time but I’m not going to overpay for their tools. Simple.

  • @usethenoodle
    @usethenoodle หลายเดือนก่อน

    I have to admit, being invested in the DeWalt 12 and 20 V-max tools for several years now, recently bought a Hercules hammer drill and side grinder. They had a deal if you bought the two battery set, and a tool, got the second tool for free. These Hercules tools are very nice high quality tools. I wouldn't hesitate buying others. The batteries are also awesome. Harbor Freight has come a long way in quality with the Icon, Quinn, Hercules, and Doyle lines. All 5 star brands in my book. I also have 2 predators and both are very nice.

    • @DMAXRYNO
      @DMAXRYNO  หลายเดือนก่อน

      Yup! It took me trying out the drill/driver set on the jobsite to get me hooked! The Hercules line is definitely a competitor!

  • @Psyco913
    @Psyco913 หลายเดือนก่อน +1

    Descent control on the jack you use for your lowered Civic in your garage makes sense.
    Descent control on your offroad jack? 🤔

  • @scottyV1000
    @scottyV1000 หลายเดือนก่อน

    Oh boy, I can see I’m going to be spending time at HF next year. Good thing they just added a store a bit closer to me.

  • @gbiswhereibe
    @gbiswhereibe หลายเดือนก่อน

    I wish you had asked if there will be any more added tools for the 12volt Hercules line? Did you see anything new in the 12volt line?

  • @roth0422
    @roth0422 หลายเดือนก่อน

    Damn those welding blocks are going to be a must

  • @junkforlessutube
    @junkforlessutube หลายเดือนก่อน +1

    Any word on a Hercules 20v air pump and full sized 20v leaf blower?

  • @thom17043
    @thom17043 หลายเดือนก่อน +1

    What are the differences between the Bauer and Hercules Surface Conditioning Tools? Knew something was up when the wire wheel came out as a Hercules the other week. 😉

  • @etmesi
    @etmesi หลายเดือนก่อน

    On the Badland Jack like other jacks with big wheels, I still say there should be a brake lock so when you park it in the garage, it doesn’t roll back out of it slot and trip people. Also when you put it in a vehicle, it’ll stop it from rolling around as you’re traveling just be better with the wheels locked like a brake lock

  • @5150cash
    @5150cash หลายเดือนก่อน +1

    Dang Fern was so passionate about the generators 🤘🏽

  • @Parleyposadajr2248
    @Parleyposadajr2248 หลายเดือนก่อน

    finally a tool box with draw in a size I can put on my welding cart

  • @wll1500
    @wll1500 หลายเดือนก่อน

    I'm VERY happy to see the beefy worm drive style saw, but now what you really need is a cordless framing nailer.

    • @DMAXRYNO
      @DMAXRYNO  หลายเดือนก่อน

      I’m sure nail guns are on their list!

  • @miggyloks
    @miggyloks หลายเดือนก่อน +5

    We will soon see you on TV Ryno doing commercials for HARBOR FREIGHT. I know you would make it more entertaining than who they use now.

    • @DMAXRYNO
      @DMAXRYNO  หลายเดือนก่อน +3

      @@miggyloks I would love that!

  • @carlpreston1680
    @carlpreston1680 14 วันที่ผ่านมา

    I have the icon snap ring pliers set they've been working great they're also stamped USA on them I believe it's a 12 piece set

  • @Ranjsounds
    @Ranjsounds หลายเดือนก่อน +2

    Thanks for going over the generators fern!!

  • @jamesd5415
    @jamesd5415 หลายเดือนก่อน +1

    Awesome I finally bought icon ratchets and they come out with better ones. At least they have a good return policy

  • @marcohernandez1660
    @marcohernandez1660 หลายเดือนก่อน

    one of my favorite youtubers growing up

  • @patmac2730
    @patmac2730 หลายเดือนก่อน

    Any coverage on those new colors icon lights? No one has talked about them

  • @Mondo_0ne
    @Mondo_0ne หลายเดือนก่อน +4

    Literally buying two more generators just because of Fernando!!! Awesome dude!!🎉

    • @fernsbbq
      @fernsbbq หลายเดือนก่อน +1

      Don’t forget the warranty. Not because the product is bad just because you could take it back no questions asked small deductible but worth it. 100% blue collar product and worth every penny.

    • @jacob.mccormack
      @jacob.mccormack หลายเดือนก่อน +1

      I want a smaller tri fuel.

  • @freak8Out
    @freak8Out หลายเดือนก่อน

    Matco has a similar locking flex head design as the new icon ones. The locking teeth like to wear out and ive already replaced them. I hope the icon ones have a better quality

  • @anythinggoesgarage5943
    @anythinggoesgarage5943 หลายเดือนก่อน

    your welding equipment is getting larger every time I go in there. I have a Titanium Plasma cutter but cat find a cup for the torch. Is there a place to order them?

  • @DavidPerez-fr1hb
    @DavidPerez-fr1hb หลายเดือนก่อน +1

    What happened to the harbor freight trailer??

    • @DMAXRYNO
      @DMAXRYNO  3 วันที่ผ่านมา

      th-cam.com/video/93ge7rczdI4/w-d-xo.htmlsi=-YqX79mVWEpyAprO

  • @randysmith9636
    @randysmith9636 หลายเดือนก่อน

    Thank you for the tour and video, great job brother.
    For the record, i really love legs.
    Easy cutting tools dosen't really translate well on video.
    That trailer is nice with some great options. You know someone is going to forget and leave the stabilizer posts down with a fully loaded trailer and take off. Hopefully the shop down the road can beat and twist the frame back into square.
    I cannot help but wonder who thought that naming your power tools "Hercules" was a great idea. I put that in the same category as making your tools the same color as children's sand box toys. (Looking at you Ryobi)

  • @vrm86gt
    @vrm86gt หลายเดือนก่อน +1

    i like that Bad land jack! cool for roadside repairs !

  • @Jeeper1378
    @Jeeper1378 หลายเดือนก่อน

    The jack .. thats so easy to do, surprised nobody’s done that yet.

  • @MarkThomasBuilder
    @MarkThomasBuilder หลายเดือนก่อน

    Nice coverage of Harbor Freight! Did they add a new color for the Daytona Jacks? I bought the purple one this year and love it!

  • @SCARFACE69247
    @SCARFACE69247 หลายเดือนก่อน

    That jack is amazing!

  • @renemuniz5192
    @renemuniz5192 หลายเดือนก่อน +2

    RYNO FOR PRESIDENT!!

    • @kdmigloo
      @kdmigloo หลายเดือนก่อน +1

      who is ryno??????

  • @nikolasyeary1154
    @nikolasyeary1154 หลายเดือนก่อน

    Any news on if they're updating the icon toolboxes?

  • @varmint243davev7
    @varmint243davev7 หลายเดือนก่อน

    I was looking for a cordless table saw to go with the cordless miter box

  • @brightford4025
    @brightford4025 หลายเดือนก่อน

    Was that a transmission jack behind you in the Daytona area?

  • @MattWillman-wo4bx
    @MattWillman-wo4bx หลายเดือนก่อน

    Thank you so much. Would that slow decent be offered on the bigger jack as well? Also for the rachets, will they be rebuildable as well? Anything on the other toolboxes besides the small ones?

  • @thekraken.and.thesquid6666
    @thekraken.and.thesquid6666 หลายเดือนก่อน

    Cool DANSPROSHOP, my cheap LED's on my OBS Suburban, keep working after 2 years, will check this ones up for replacement, cheers.

  • @johnroberts4823
    @johnroberts4823 หลายเดือนก่อน +3

    I love how she has hand strength to grab that handle and pump it up, that turned it and it goes down!

    • @g_unit6773
      @g_unit6773 หลายเดือนก่อน +2

      Settle down fella 😂😂

    • @BuckingHorse-Bull
      @BuckingHorse-Bull หลายเดือนก่อน

      @@g_unit6773 what is that girl doing she looks like my annoying lil cousin who doesnt understand personal space

  • @zane9785
    @zane9785 หลายเดือนก่อน +3

    Yes I've been wanting a Hercules cordless rotary hammer for a while

    • @stevenbrindisi4719
      @stevenbrindisi4719 หลายเดือนก่อน +1

      I'd love a cordless SDS Max demo hammer.

    • @zane9785
      @zane9785 16 วันที่ผ่านมา

      ​@@stevenbrindisi4719
      Battery life might not be good but I'd still buy one if they made it and if Milwaukee and Bosch can make 18v cordless sds max hammers so can hercules

  • @lalolemusme
    @lalolemusme หลายเดือนก่อน

    @ 36:11 minute I saw a transmission high jack,, at daytona.. someone need info plz

  • @clinteast7476
    @clinteast7476 หลายเดือนก่อน

    I would like to see some Solar lights, and Solar gate openers, for large Gates.And solar power stations that recharge and can leave power station in one spot.

  • @STARFLEETC0MMAND
    @STARFLEETC0MMAND หลายเดือนก่อน +3

    When Will HF Bring To Market An Affordable Laser Rust Cleaner Between $500-$1000 Bucks or Less ???
    Thanks For The Awesome Video..

    • @DMAXRYNO
      @DMAXRYNO  หลายเดือนก่อน

      I’m sure as that technology continues to develop, more affordable versions will become available

  • @DaveP326
    @DaveP326 หลายเดือนก่อน +1

    Bauer cordless 20v doesn't have anything new at the SEMA show???

  • @JoeMoore-me5qk
    @JoeMoore-me5qk หลายเดือนก่อน

    I worked at HF for 6 months,
    The most returns were generators for various reasons. Not to say there all bad but there were plenty of them in the 6 months.
    Never had any impact or Icon tools returned.

    • @puckcat22679
      @puckcat22679 หลายเดือนก่อน +4

      That's how it is with generators in general. All brands, all stores. Most places these days refuse to take them back- the majority of it is people buying them right before a storm, using them if the power goes out, then returning them. If they used it, they'll tell the store it was "defective" in some way.

    • @kennethwellington9547
      @kennethwellington9547 24 วันที่ผ่านมา

      HF is sells garbage to homeowners and they count on them not using the stuff.

  • @larryhack4038
    @larryhack4038 หลายเดือนก่อน

    You never said if the cordless miter saw was a 10 inch saw or a 12 inch saw. Which one?

    • @DMAXRYNO
      @DMAXRYNO  หลายเดือนก่อน

      10”

  • @MultiAlex1530
    @MultiAlex1530 หลายเดือนก่อน +1

    Gosh if they had a car trailer like that it would be sold

  • @threestarsandasling
    @threestarsandasling หลายเดือนก่อน

    Right on! I'm diggin the jigsaw and rotary hammer!! Super excited!

  • @bka0721
    @bka0721 หลายเดือนก่อน

    Seriously!? Chewing gum while talking on camera and meeting people at SEMA, Athena? Thanks for being at SEMA, DMAXRYNO! It was great meeting you.

    • @DMAXRYNO
      @DMAXRYNO  หลายเดือนก่อน

      @@bka0721 I do the same thing. I get bad dry mouth if I don’t.

  • @hypertube81
    @hypertube81 หลายเดือนก่อน

    No US General mid-boxes still?

  • @darinrichards4169
    @darinrichards4169 หลายเดือนก่อน

    I've used other brands. I've started buying hurcules tools and love them. I'm converting all my tools to hurcules.