thanks for the tutorial, a bit of friendly advise to whoever is going to do this operation; as i learned doing this when you screw in the plastic trim assembly, the two screws on the back of the wheel are easy but the two inside of the wheels, 9 o'clok and 3 o'clock are not to be over tighten as it will break the plastic clip, i lost one in this process but managed to grip it with larger washer...
awesome The E46 is said to be a fan fav among Bmw fans...The 3 series has always been the center of the Legendary brand.Got one my self 12 years old and I love it.
thanks for the help.......took me an hour to get the left spring to release! I learned the hard way not to pull the first side out too far, I think it binds the other side from releasing.
Just a quick FYI, I purchased my new Wheel from Ebay, they have several there's one that wraps them with nappa, padding and alcantara ........beautiful work, they are out of Europe but wow amazing. E39source thanks for the vid......very well done.
I own a 2001 BMW 325i with the stock steering wheel (neither sport or m sport) so would I be able to replace it with the m sport steering wheel? Thank you
Awesome DIY. Thanks for spending the time to make this video. I think that I'm just going to end up putting the steering wheel covers on though instead of replacing the wheel. The top of my wheel is cracked and worn out but I think a cover should suffice.
I have done the same pretty much...I broke the wiper switch and had to take off the steering wheel to get at it...(It is the later model E39) now it works great except the airbag light is on, could that be because the ground wire is not connected properly?
If you removed the airbag with the battery still connected, that will trigger the airbag light until it is reset with a computer. The ground for the airbag is likely in the wiring harness, not one of the screw-down spade grounds under the airbag in the wheel- but that would be worth checking as well.
@@E39Source I disconnected the battery, and left it for about 1 hour before removing the airbag. My next step is to check the spade connector again. BMW can reset the light but they want to charge $500, unfortunately I cannot get the car certified for the road when the light is on. Thanks for your reply, I really appreciate the help. I will let you know what the outcome is. Eric.
@@VNNZTC $500 to reset the light?! That's insane... find an independent shop to do it. Once it's on, I think even fixing a problem with it will still require a reset. Good luck
can we replace the steering wheel without buttons with the multi-steering steering wheel buttons. and will the multi steering wheel work ..please help...?
I am unsure if BMW put the wires there that would plug into the multifunction controls or not. If so, it can probably plug right in and work. Otherwise, there may be much more extensive modifications required to get it to work.
When loosening the 16mm bolt, did you have the steering lock on? It looks like loosening that bolt causes the wheel to turn otherwise. I don't want to break the steering lock
The air bag plugs don't just slide the clip up and come out. Clip slides up after you do the 2 taps down the side but the moment you touch the plug to pull it up with 2 fingers it turns into 300 pieces of dust. Even with the plug broken of in the airbag with pliers I still can't get the other ends out they are stuck good and pepper. Are some models glued in?
Are there any bad side effects to installing the wheel crooked? I installed a new steering shaft and got the wheels out of alignment. I would much rather realign it from the steering wheel splines rather than the steering rack splines if that makes sense
E39Source I’ll need to have it recalibrated then. Either that or buy a new steering rack. Condor Speedshop’s steering shaft u-joint requires that you drill holes in the factory shaft and steering rack spline, and I goofed and drilled my steering rack spine in the wrong place
Hey Great video everything works perfect!! But after installing my airbag my phone is on constantly I keep trying to adjust it but it stays on constantly any idea what I'm doing wrong ? Would Greatly appreciate the help
Yes everything is tight . It's like the Horn is constantly on and if I lift airbag up from 6 o'clock turned off but it falls back down to honking If let it go
I did this on my BMW 3 series, a slighter newer model and the air bag warning light is now on. Any suggestions? I have tried to replace it with the original wheel to solve it but no luck.
You'll have to hook up a scanner and clear the code. Did you disconnect the battery before you removed the old wheel? Most OBDII scanners cannot clear airbag codes, so you may have to have a shop do it.
Hey man! I want to clarify if I understood everything correctly. I have this wheel with silver lower trim, I can just buy to m lower trim and change that and it’s plug and play?
@@przemoczat1 The black solid M piece without the 'crotch' may not fit the wheel WITH the crotch... I would just change your whole steering wheel to an M wheel.
hey got a quick question, i have a zhp which had an alkantara m3 wheel. the wheel is damaged and i got a used m3 leather wheel. is all i need to do is to remove the airbag and the 16mm nut? when i reinstall new wheel and airbag, does the airbag need to be reset?
You are correct, it's that easy. Just be SURE to disconnect the battery before removing the old airbag and then connect it when you're all done. That's all you need to do.
Is airbag module the same for 3-spoke "sport" steering wheel and M-style steering wheel? I saw M-steering wheel without airbag for sale, can I fit my airbag (standard E46) to it?
+Redstar 2.0 | COD, GTA V And more As long as it's a dual stage airbag, which were made after May of 1999 or so I think. Otherwise, the airbag won't work.
Thanks so much for all your videos! I'm actually looking at replacing my 01 E39 540 wheel with a facelifted wheel from an E46 M3 SMG. In watching your other video where you replace your M5 wheel, I noticed that the airbags are held on differently. Would I have to have to replace the "airbag holder" on the E46 wheel for that of an E39 wheel? Also do you think it'd be annoying to have the empty holes from the missing SMG paddle shifters? Thanks again!
+Alain Milotti I would highly recommend just buying a face-lifted E39 M5 wheel, which would be a simple bolt on installation. The holes from the paddle shifters would probably annoy me. The airbag fastening between the E46 and E39 probably are different IF your 2001 540i does not have the 3-spoke sport wheel, so you may need to work with that too.
Thanks for the video! You've earned a subscriber! I was looking for a video as well done as this one a few days ago. Also, the tools that OWC provides are awesome. I've been using OWC stuff for more than 10 years now; I've never had a problem. Edit: interestingly, the sport steering wheel on the e39 has those little "bolsters"/thumb grips and is pretty thick.
Awesome! Glad you found our video useful, thanks so much for subscribing. OWC tools are excellent, I've been using them for about 5 years, since I got into the Mac.
+Treizez34 I do still have this car, I have put around 10,000 miles on it. It's been great so far! I did have to replace the fuel pump at 222,000 miles or so. And I put new spark plugs in it for fun... pretty reliable car. It's no sports car by any means, but it's a good car, and an fantastic winter car!
It gives the car character! but do you think you can do a DIY on trying to repair or maintaining seats? I watched the full detailed clean of your E39 and have been doing it on my e70 X5.. But my E90 has started to wear in that exact place, sport package 325xi
Fady Said Well really the video that you watched is that DIY. I Z9 and Z10 my M5's seats twice a year, maybe three applications of Z10. That and an occasional vacuum is all they get. If you do that on a car starting at a young enough age, I bet they'd always be perfect! I don't know how to bring them back when it's too late, I would probably source a leather professional. They can do some pretty good work.
Aside from Ebay, does anyone know of a good source for new BMW steering wheels that don't require me selling 30% of my internal organs to a Third World country? I could have sworn I read somewhere on youtube of a place in San Jose CA that sold (new) BMW steering wheels/Bimmer parts at good prices. I'm considering buying a 2003 330ci, but want to get that nice, meaty e39 M5/e46 M3 wheel, as in this video. Thanks to all that reply!
+1970borntorun It changes by the day, different companies have shipping deals or their price is just lower. Find the part number for the one you want, and go crazy. Search it with Google, Amazon, ECS, Turner, BMW parts store, Ebay, Bav auto, different dealerships, etc.
Ryan this is a great DIY .... Thanks for being so in depth ! ..... Our ever evolving App E46 Guide is on going with updates .... It's on the App Store for E46 owners - App Store link is : itunes.apple.com/us/app/e46-guide/id922719530?mt=8 Thanks for letting us share & thanks for your videos !! Helping so many of us !
hey got a quick question, i have a zhp which had an alkantara m3 wheel. the wheel is damaged and i got a used m3 leather wheel. is all i need to do is to remove the airbag and the 16mm nut? when i reinstall new wheel and airbag, does the airbag need to be reset?
hey got a quick question, i have a zhp which had an alkantara m3 wheel. the wheel is damaged and i got a used m3 leather wheel. is all i need to do is to remove the airbag and the 16mm nut? when i reinstall new wheel and airbag, does the airbag need to be reset?
Hey.. Your explanation is hands down the best I have ever seen on TH-cam DIY videos.. you explanation is so helpful.. Very nice video as well.
Thanks for your feedback! Appreciate that very much. :D Ryan
This is the best automotive presentation I have ever seen on TH-cam. Excelllent, thank you.
Great vid, just installed mine. FYI you don't need to loosen the ground wire on the torx screw inside the wheel - the wire is attached to the wheel.
thanks for the tutorial, a bit of friendly advise to whoever is going to do this operation; as i learned doing this when you screw in the plastic trim assembly, the two screws on the back of the wheel are easy but the two inside of the wheels, 9 o'clok and 3 o'clock are not to be over tighten as it will break the plastic clip, i lost one in this process but managed to grip it with larger washer...
awesome The E46 is said to be a fan fav among Bmw fans...The 3 series has always been the center of the Legendary brand.Got one my self 12 years old and I love it.
thanks for the help.......took me an hour to get the left spring to release! I learned the hard way not to pull the first side out too far, I think it binds the other side from releasing.
me too my man me too untill i decided to pop the otherside back in lol and then try again haha i was pissed lol
Just a quick FYI, I purchased my new Wheel from Ebay, they have several there's one that wraps them with nappa, padding and alcantara ........beautiful work, they are out of Europe but wow amazing. E39source thanks for the vid......very well done.
Excellent excellent video. Probably the best when it comes to removing an E46 and E39 wheel. Thanks very much.
One of the best DIY vids out there. Thanks!
I own a 2001 BMW 325i with the stock steering wheel (neither sport or m sport) so would I be able to replace it with the m sport steering wheel? Thank you
You sure can!
i bought a perfect condition M sport wheel for 80$ , O-o the guy who sold it to me had no idea whats it worth lol
lucky you... i would pay that in heartbeat
Awesome DIY. Thanks for spending the time to make this video. I think that I'm just going to end up putting the steering wheel covers on though instead of replacing the wheel. The top of my wheel is cracked and worn out but I think a cover should suffice.
Thank you for the video! Best clear description out there.
330i is my dream, or e39 530i, will buy one some day, for now 325i is enough :)
Thank you for your video! I had my steering wheel changed. Do you know how to change the badge on the airbag?
The badge is part of the airbag and cannot be replaced independently. You can buy stickers / decals online to put over the existing one though.
I have done the same pretty much...I broke the wiper switch and had to take off the steering wheel to get at it...(It is the later model E39) now it works great except the airbag light is on, could that be because the ground wire is not connected properly?
If you removed the airbag with the battery still connected, that will trigger the airbag light until it is reset with a computer. The ground for the airbag is likely in the wiring harness, not one of the screw-down spade grounds under the airbag in the wheel- but that would be worth checking as well.
@@E39Source I disconnected the battery, and left it for about 1 hour before removing the airbag. My next step is to check the spade connector again. BMW can reset the light but they want to charge $500, unfortunately I cannot get the car certified for the road when the light is on. Thanks for your reply, I really appreciate the help. I will let you know what the outcome is. Eric.
@@VNNZTC $500 to reset the light?! That's insane... find an independent shop to do it. Once it's on, I think even fixing a problem with it will still require a reset. Good luck
i had no clue i could do this thank you
+matrex Foxx Glad we could help!
Great video! Thanks a ton. Simple and to the point.
can we replace the steering wheel without buttons with the
multi-steering steering wheel buttons. and will the multi steering wheel
work ..please help...?
I am unsure if BMW put the wires there that would plug into the multifunction controls or not. If so, it can probably plug right in and work. Otherwise, there may be much more extensive modifications required to get it to work.
When loosening the 16mm bolt, did you have the steering lock on? It looks like loosening that bolt causes the wheel to turn otherwise. I don't want to break the steering lock
Don't let the steering wheel lock take that torque. You're better off to have somebody counter-hold the steering wheel for you manually.
The air bag plugs don't just slide the clip up and come out. Clip slides up after you do the 2 taps down the side but the moment you touch the plug to pull it up with 2 fingers it turns into 300 pieces of dust. Even with the plug broken of in the airbag with pliers I still can't get the other ends out they are stuck good and pepper. Are some models glued in?
They should come right out like mine did, glue wouldn't have been used. This is very strange...
ok now where do i buy those two connectors that plug in the airbag? the yellowish green and black one? cuz i effed up mines
If your airbag looks like the one in this video, I think its this: tinyurl.com/94ccbyrb
That Zano stuff you use is tempting me. Do you have any videos explaining your process?
I have a Zaino application tutorial on E39Source when I did my M5 a few springs ago!
Are there any bad side effects to installing the wheel crooked? I installed a new steering shaft and got the wheels out of alignment. I would much rather realign it from the steering wheel splines rather than the steering rack splines if that makes sense
The wheels need to be aligned at the wheels. The steering angle sensor would not take kindly to always being 'off'.
E39Source Would it make a difference if DSC was deleted? Because my DSC is deleted
@@kurzjames No
E39Source I’ll need to have it recalibrated then. Either that or buy a new steering rack. Condor Speedshop’s steering shaft u-joint requires that you drill holes in the factory shaft and steering rack spline, and I goofed and drilled my steering rack spine in the wrong place
I have an E46 2000 320Ci... Will I be able to do a steering wheel swap without getting problems or lights with the dual/single-stage airbag?
Zinky I don't know when the E46s went from single to dual stage airbags. The E39 was late 1999 though.
They went from single to dual stage around september 2001, so I will be going from singel stage originally to dual stage with the new wheel fitted
Always WAIT 5 minutes after disconnecting the battery to remove the Airbag connectors. If you like your shiny actual teeth.
Hey Great video everything works perfect!! But after installing my airbag my phone is on constantly I keep trying to adjust it but it stays on constantly any idea what I'm doing wrong ? Would Greatly appreciate the help
Your phone is on constantly? Does your car have a built in phone?
Lol sorry *my horn
I would make sure all of the wires are securely connected, especially the ground strap if you have one.
Yes everything is tight . It's like the Horn is constantly on and if I lift airbag up from 6 o'clock turned off but it falls back down to honking If let it go
Can you actually push down to "activate" the horn? Or is the "button" stuck in?
I sure hope the wires will be able to tuck in the hub adapter housing with my momo wheel.
Should there be a litte play in the airbag after the reinstall? its seated and clipped it just wiggles a little bit
MiniMe Maybe very minor play. Keep in mind that it will move in when you press it to activate the horn.
I did this on my BMW 3 series, a slighter newer model and the air bag warning light is now on. Any suggestions? I have tried to replace it with the original wheel to solve it but no luck.
You'll have to hook up a scanner and clear the code. Did you disconnect the battery before you removed the old wheel?
Most OBDII scanners cannot clear airbag codes, so you may have to have a shop do it.
+Bobby O'Hearn yeah I disconnected the battery and left it for at least 10 minutes before removing connections. Ok thanks for the reply.
Hey man! I want to clarify if I understood everything correctly. I have this wheel with silver lower trim, I can just buy to m lower trim and change that and it’s plug and play?
If the trim is the same shape/size, you can switch between whatever colors you want.
E39Source yeah but I mean the normal one to m one. Is it possible with no hustle
As you said in 8:19, but u did it off camera that’s why I’m asking
@@przemoczat1 The black solid M piece without the 'crotch' may not fit the wheel WITH the crotch... I would just change your whole steering wheel to an M wheel.
Ouuuu, now I got you. So the only things that can be translated from sport to m wheel is the airbag and the buttons right?
Thanks man your video helped me a lot
hey got a quick question, i have a zhp which had an alkantara m3 wheel. the wheel is damaged and i got a used m3 leather wheel. is all i need to do is to remove the airbag and the 16mm nut? when i reinstall new wheel and airbag, does the airbag need to be reset?
You are correct, it's that easy. Just be SURE to disconnect the battery before removing the old airbag and then connect it when you're all done. That's all you need to do.
Thank you! It really helped to fix it.
This guys knows his shit !!👍🏻👍🏻
Nice, use leather oil on the cracked section that should fix it right up after a few passes
Is airbag module the same for 3-spoke "sport" steering wheel and M-style steering wheel? I saw M-steering wheel without airbag for sale, can I fit my airbag (standard E46) to it?
Yes, they are the same module after 5/1999 production. The wheel would be a direct plug and play.
Very nice video mate/// im doing mine today in my 04 zhp.
What's the name of the new steering wheel that you installed
i have the same E46 320d 2004 but i have another wheel .. may i ask how much did it cost to you ...
Thanks for the video thought :)
I think I paid $200 total for that wheel.
***** 200$ the complete wheel group ? if yes i would like to buy a similiar one from u
Dalip Çelbeqiri I bought it from Ebay, I don't sell steering wheels.
Looks much better!
Hi, do you know if the E39 steering wheel fits the E46?
It does!
@@E39Source Thank you, Sir 👍👍👍
sat at the scrap yard with a screw driver for an hr and gave up lmao
This is so fucking frustrating
Do you know if you have the old e46 (4 spoke steering wheel), you can replace it with this model?
+Redstar 2.0 | COD, GTA V And more As long as it's a dual stage airbag, which were made after May of 1999 or so I think. Otherwise, the airbag won't work.
Can you remove it if the airbag has already deployed?
Sure, same idea.
THANK YOU VERY MUCH!! Great video!
Thanks so much for all your videos! I'm actually looking at replacing my 01 E39 540 wheel with a facelifted wheel from an E46 M3 SMG. In watching your other video where you replace your M5 wheel, I noticed that the airbags are held on differently. Would I have to have to replace the "airbag holder" on the E46 wheel for that of an E39 wheel? Also do you think it'd be annoying to have the empty holes from the missing SMG paddle shifters? Thanks again!
+Alain Milotti I would highly recommend just buying a face-lifted E39 M5 wheel, which would be a simple bolt on installation. The holes from the paddle shifters would probably annoy me. The airbag fastening between the E46 and E39 probably are different IF your 2001 540i does not have the 3-spoke sport wheel, so you may need to work with that too.
Thanks for the video! You've earned a subscriber! I was looking for a video as well done as this one a few days ago.
Also, the tools that OWC provides are awesome. I've been using OWC stuff for more than 10 years now; I've never had a problem.
Edit: interestingly, the sport steering wheel on the e39 has those little "bolsters"/thumb grips and is pretty thick.
Awesome! Glad you found our video useful, thanks so much for subscribing. OWC tools are excellent, I've been using them for about 5 years, since I got into the Mac.
do you still have the car? If so how is it running? I'm looking into possibly purchasing one myself
+Treizez34 I do still have this car, I have put around 10,000 miles on it. It's been great so far! I did have to replace the fuel pump at 222,000 miles or so. And I put new spark plugs in it for fun... pretty reliable car. It's no sports car by any means, but it's a good car, and an fantastic winter car!
Great video indeed. Well done !
The only problem I have: You tend to speak too rapid. For a foreigner it's a real challenge to follow you properly :-)
Hey is there some wear n tear on your thigh support for that driver seat?
There is a little bit of wear, but this car has 215,000 miles. That is to be expected.
It gives the car character! but do you think you can do a DIY on trying to repair or maintaining seats? I watched the full detailed clean of your E39 and have been doing it on my e70 X5.. But my E90 has started to wear in that exact place, sport package 325xi
Fady Said Well really the video that you watched is that DIY. I Z9 and Z10 my M5's seats twice a year, maybe three applications of Z10. That and an occasional vacuum is all they get. If you do that on a car starting at a young enough age, I bet they'd always be perfect! I don't know how to bring them back when it's too late, I would probably source a leather professional. They can do some pretty good work.
My damn wheel will Not release and it’s definitely wiggling and I’m on the spring clip..
Andrew how did you end up getting it?
Is that old steering wheel for sale?
Sure! Email me ryan@e39source.com
you save my day, tnx for great video
Thnx to you. it was easy. 😉
Literally can’t feel a spring and I’ve been at it for awhile
Very helpful thanks guys!
how different is e90 from this?
Probably not much different at all
Earned a subscriber
Did anyone else's horn not work after putting back?
It should work fine, may just need to check connections and re-seat the airbag.
Good tutorial. Well done.
Aside from Ebay, does anyone know of a good source for new BMW steering wheels that don't require me selling 30% of my internal organs to a Third World country? I could have sworn I read somewhere on youtube of a place in San Jose CA that sold (new) BMW steering wheels/Bimmer parts at good prices. I'm considering buying a 2003 330ci, but want to get that nice, meaty e39 M5/e46 M3 wheel, as in this video. Thanks to all that reply!
+1970borntorun It changes by the day, different companies have shipping deals or their price is just lower. Find the part number for the one you want, and go crazy. Search it with Google, Amazon, ECS, Turner, BMW parts store, Ebay, Bav auto, different dealerships, etc.
Very helpful guys!
perfectly explained. thanks
Great video, great explanation! Thanks so much
good information
good explanation
Manual 330ix man that is fucking sweet
Nice IWC.
Ryan this is a great DIY .... Thanks for being so in depth ! ..... Our ever evolving App E46 Guide is on going with updates .... It's on the App Store for E46 owners - App Store link is : itunes.apple.com/us/app/e46-guide/id922719530?mt=8 Thanks for letting us share & thanks for your videos !! Helping so many of us !
Leo
We can’t see shit
iwc :))
hey got a quick question, i have a zhp which had an alkantara m3 wheel. the wheel is damaged and i got a used m3 leather wheel. is all i need to do is to remove the airbag and the 16mm nut? when i reinstall new wheel and airbag, does the airbag need to be reset?
hey got a quick question, i have a zhp which had an alkantara m3 wheel. the wheel is damaged and i got a used m3 leather wheel. is all i need to do is to remove the airbag and the 16mm nut? when i reinstall new wheel and airbag, does the airbag need to be reset?