Thanks for the clear explanation on how to update, wait in anticipation to see what (if) any improvements have been made. Obviously no explanation on the Fnirsi website on what the update is for or what changes have been made.
I'm interested to see if this fixes the trace problem. I'm not too optimistic but I'm guessing you will try that injector trace trial again. Good video, thank you!!!!
I don't know whether you have covered this... and I forgot to mention in my previous comments, just a note to others, auto calibration is not covered in the manual. To auto calibrate hold down the AUTO button until you get message "Awaiting auto-correction" wait for message to go, about a minute, then it is ready to use.
Just worth noting Firmware v1.6 limits the ability to go past 10kHz in the Signal Generator menu. With version 1.5 you can go up to 22kHz, even though the device's manual states the 10kHz limit.
I would like to do the firmware update without any undesired mistakes and as I saw in the video that the following Notice was not done from the manual but I also saw that the update was successful that is why I am just asking. Is this means something in the manual: "During the upgrade process, you need to keep pressing the power button until the file transfer is complete."? Is there anyone who is in the know?
🤣 Thx…Yes it is , kinda. Or what’s left of it. Take a boy of 7’ out of Glasgow and drop him into Toronto and 50 years later you get a pretty weird mashup. Add to that a healthy dose of nasal inflection and you end up with a pretty annoying vocal 🤣 Thx for watching 🍻👍
Thanks for the clear explanation on how to update, wait in anticipation to see what (if) any improvements have been made. Obviously no explanation on the Fnirsi website on what the update is for or what changes have been made.
It would be nice if the update release was accompanied by a brief. We can keep hoping 🤣
Thx for watching 🍻
I'm interested to see if this fixes the trace problem. I'm not too optimistic but I'm guessing you will try that injector trace trial again. Good video, thank you!!!!
I will. As you say…not that optimistic. Thx for watching 🍻
I don't know whether you have covered this... and I forgot to mention in my previous comments, just a note to others, auto calibration is not covered in the manual. To auto calibrate hold down the AUTO button until you get message "Awaiting auto-correction" wait for message to go, about a minute, then it is ready to use.
Mint thx a lot. 🍻
Just worth noting Firmware v1.6 limits the ability to go past 10kHz in the Signal Generator menu. With version 1.5 you can go up to 22kHz, even though the device's manual states the 10kHz limit.
Ok thx and thx for watching 🍻
I would like to do the firmware update without any undesired mistakes and as I saw in the video that the following Notice was not done from the manual but I also saw that the update was successful that is why I am just asking. Is this means something in the manual: "During the upgrade process, you need to keep pressing the power button until the file transfer is complete."?
Is there anyone who is in the know?
Have you checked injector wave form after software update ?
Not yet. Honestly I don’t believe it will make any difference, as the file size was tiny. Thx for watching. 🍻
@@TheGibby3340 cheers! please do a video for that. It helps my studies
I don't own a DSO but I enjoy your dry humor and content. Is that a Scottish accent? Thanks, keep at it 😅
🤣 Thx…Yes it is , kinda. Or what’s left of it. Take a boy of 7’ out of Glasgow and drop him into Toronto and 50 years later you get a pretty weird mashup. Add to that a healthy dose of nasal inflection and you end up with a pretty annoying vocal 🤣 Thx for watching 🍻👍
Me llegó uno y dice que tiene instalado 1.8
Ok Thx. The intention of the video is only to demonstrate the process of the upgrade, not so much the version. Thx for watching 👍🍻
@@TheGibby3340 si excelente tu video ,,,el cual recomiendo lo que quiero decir que ya hay una version mas nueva gracias y bendiciones
How to upgrade dso152? I need a video in this topic
Is there an update available?
Подскажите, как вернуть версию 1,5 , подалуйста?