ไม่สามารถเล่นวิดีโอนี้
ขออภัยในความไม่สะดวก
How to Replace Front Brakes 00-05 Ford Excursion
ฝัง
- เผยแพร่เมื่อ 8 ส.ค. 2024
- Buy Now!
New Brake Kit from 1AAuto.com 1aau.to/ia/1ABFS01784
1A Auto shows you how to repair, install, fix, change or replace your own worn, squeaky, fading old front brakes. This video is applicable to the 00, 01, 02, 03, 04, 05, Ford Excursion
🔧 List of tools used:
• Flat Blade Screwdriver 1aau.to/oIL/1AXAA00013
• 17mm Socket 1aau.to/oCn/1AXAA00015
• 21mm Socket 1aau.to/ois/1AXAA00043
• A Piece of Pipe (for leverage)
• Ratchet 1aau.to/oJu/1AXAA00016
• Torque Wrench 1aau.to/okE/1AXAA00044
• Bearing Grease
• Brake Fluid
• Brake Parts Cleaner
• Cloth Rags 1aau.to/odA/1AXSS00035
• Floor Jack 1aau.to/oi7/1AXAA00068
• Hammer 1aau.to/ofq/1AXAA00091
• Jack Stands 1aau.to/oi6/1AXAA00065
• Large C-Clamp
For More Info visit us at 1aau.to/h/aiy/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto
√ *Do it Yourself*
√ *Save Money*
Very helpful. Did my first ever brake job on my 2000 Excursion. Would not have done it if I hadn't seen your video. Thank you.
+ludvig tande Congratulations on the successful repair. We're glad the video helped you out. 1aauto.com 866-403-3393
The biggest difference is the rotors, and they aren't interchangeable, so that should be pointed out. I almost ordered the parts list from you based on the video, but after further research I found out that I need a different parts package.
Thanks for the great video.
Thank you your video was perfectly helpful for us. We will order parts from you. Merry Christmas
Thanks , checking for hammer use. Couldn't remember when did back 😊
Is there a trick to get the wire springs to not pop loose while putting on pads?
hi guys, can I use royal purple trans fluid on my excursion 6.8?
Please don't forget to use medium strength ( Blue ) Loctite on the caliper bracket bolts ( 17mm ). There are instances where these bolts will back off.
dzięki za filmik pozdro ////
What is the name of that hose on top center of the disc...mine have disintegrated..but I still have brakes
Good job
+Fahmi Ben Thanks for watching. We're glad you liked it. 1aauto.com?TH-cam&CTA%20Comment&ATony 866-403-3393
The brake pads look a little different. Is there a inside/outside pad
Is the process the same for the back as well?
+Daniel Beck We don't have a how-to video for your vehicle right now, but the basic steps in this video should be enough to do this task. Buy this part for your vehicle on 1AAuto.com: 1aau.to/m/Shop-1AAuto-c
You just pumped the brake pedal until it was firm but do you still need to bleed any trapped air in brake line?
not if you didnt remove the brake line from the caliper
Is it just a simple on a 2wd, because my rotor does not look like that
In your video, you mentioned tightening the lug nuts to 100 ft-lb, I always thought they should be 145 to 155 ft-lb.
+Alex Yu It is 150ft-lbs. Sorry for the error.
Should be 165 lbft
Was the vehicle in the video a 4WD? You don't mention if it is, but I think the rotor and pad package is different for a 2WD. It would be nice to see the same replacement for a 2WD Excusion.
+Michael Grahek You are correct. This vehicle is a 4WD, and most of the components should remain the same. Some on the 2WD will be separate. 1aauto.com
Wish your company offered rebuild kits for calipers!
+L1A1Rocker We are always expanding our inventory so check back soon!
Where do i,Jack up my 2004 Ford excursion idk where to put my jack
What's the minimum/acceptable thickness for the rotor?
+dasteufelhund Thank you for checking us out. The Nominal rotor thickness should be 1.495 inches, and they should be replaced if the thickness gets to 1.417 inches or below. 1aauto.com
Awesome demonstration! Thank you!
I always pull the reservoir cap off...
Lost all credibility seeing him install lug nuts with an impact wrench - even "finishing off" with the torque wrench... Rotors will warp in no time.
This a really poorly done. Where’s the loctite? Torque specs are incorrect. Just a hasty crap job.