It was definitely a mess. I think tobey could have been really good with the right colours, Andrew with better articulation and Tom should have been completely redone
@@danielmontero8200 they def wont have new articulation, idk if you're new to legends, but they tend to be dog shit, and exploiting as much money they can on a single mold
@@ivanfrias2605 I'm not new to marvel legends. Been collecting since 2018. It's just that I would've hoped that the team at Hasbro could improve articulation when re-releasing a figure. But at this point, it's just a fantasy.
Literally don’t understand why anybody is hating on the singles of these three Peters. The three pack was meh, but their individual releases are great!
The mid torso joint was like caged inside of the abs part or it popped out easy? Because with the amazing fantasy I had to crack it to pop out that part
Looks really cool, i think the only thing that is uglybisnthe neck, apart from that you are amazing dude. Good job. Btw the human heads look so funny 😂
If you want his foot to be flat on the floor when his leg is out right you have to rotate the thigh. But this can look really un natural in some poses or if you have the knee bent it doesn't work. Basically if you think about the fact that your foot rotates slightly at your ankle like your wrist does, a figure should be able to replicate that for posing
DUDE how did you remove his chest, I placed my figure during 4 looong hours in hot water and I still can't remove it, how did you do this pleaaaaaaase 😭
Obviously, I don't know the legality of selling these custom pieces since Spiderman is a copyrighted thing, and they definitely wouldn't pass on the opportunity to sue someone
@CraftyGecko I've already been silenced regarding this topic, which is ridiculous because there's always a grey area when it comes to selling third-party accessories like these
@CraftyGecko The doctor who community when I brought up the potential legality of selling 3D printed sculpts/casts somebody already made sculpts for the 14 and 15 doctors and are trying to sell them without the permission of character options or the BBC bad wolf since there's multi companies involved in it's production now. making it a string of ownership, meaning there isn't just the BBC to consider if they were to go after someone but rather multiple partys so even they wouldn't pass on the possibility of sueing someone, hence why sales of these items create grey areas because your profiting off of something which is copyrighted
Oh, right. For the most part, you can get by if you don't advertise it or brand it as a copyrighted name. For example, I have stuff on my etsy under "amazing arachnid" or "friendly neighbourhood" to make sure I'm treading as lightly as possible
@@CraftyGecko Nice because I need some help with doing my own little mod. Mostly for articulation since 2099 is so stiff when it comes to articulation. Looking forward to it.
@@CraftyGecko All good man, inspect the goods for as long as you need. But I wasn’t kidding when it’s stiff in articulation. I’ve had to dremel a fodder of a 2099 figure for the leg’s articulation to be better.
I have a detailed tutorial of it in the original tobey maguire video. I dont make toe joints like this anymore so I'm afraid that might be the best I can offer
I dont I just had them lying around. If you search steel rod on ebay or amazon they tend to come up there. You want around 1.5 to 3mm diameter ideally and obviously something to cut it down with
This whole 3 pack was just a total mess, each figure looked like it was designed by a completely different company. I
It was definitely a mess. I think tobey could have been really good with the right colours, Andrew with better articulation and Tom should have been completely redone
Go cope. The individual figs are great, should’ve waited for the Peter head sculpts.
@TheToyNerdNinja there's no need to be rude about it, everyone has different preferences
Tobey baby hands
Loving the new articulation. Just wish Hasbro did this from the start. Maybe when it gets sold separately. Assuming it does. Still, great video.
Thank you! Unfortunately I think the separate figures might only get unmasked heads. I hope I'm wrong
@@CraftyGecko Hopefully they have more articulation, accurate paint jobs, unmasked heads & finger pointing hands.
@@danielmontero8200 I hope so, although it would mean i wasted £100 and hours of my time 😅
@@danielmontero8200 they def wont have new articulation, idk if you're new to legends, but they tend to be dog shit, and exploiting as much money they can on a single mold
@@ivanfrias2605 I'm not new to marvel legends. Been collecting since 2018. It's just that I would've hoped that the team at Hasbro could improve articulation when re-releasing a figure. But at this point, it's just a fantasy.
Love Andrew’s spiderman
They did him Justice with this figure
They really did
Literally don’t understand why anybody is hating on the singles of these three Peters. The three pack was meh, but their individual releases are great!
@@CaptainRockoBD yeah the only negative on the single releases are the QC issues
This is all stuff hasbro should do and could fix. Lazy
It would be much easier for them to fix than it was for me too
I wish I had the guts to do the feet like that..
I 3d print them now to save risking damage
The deeper ab crunch is absolutely needed !!
It is!
The mid torso joint was like caged inside of the abs part or it popped out easy? Because with the amazing fantasy I had to crack it to pop out that part
It took me ages o get it out. I had to use a rotary tool to reduce the socket wall to get it out
Excellent job 👍
Thank you!
that pose at the end is insanely good
Thanks!
Andrew Figure > other 2 figures in the 3 pack
I agree
Do you print using regular pla or are they resin prints?
They're resin prints
Love how you call it a scalpel. Lmao
homem-aranha tem mais legal🎉😮😅😅😄👍🏾👍🏾🎉😄
💀i think i missed a step but at least i preordered the shf version
That on looks good, im holding off til mafex now
Looks really cool, i think the only thing that is uglybisnthe neck, apart from that you are amazing dude. Good job. Btw the human heads look so funny 😂
Thank you
Bro.. just buy the mafex at this point
@jamesmendoza456 buy the figure that didn't exist at this point?
does dipping the figure in hot water damage the paint in any way?
Not from my experience but other people have said it can happen
Can someone tell me what the boot articulation accomplishes? I don't understand what you have to gain with it if you already have ankle pivot.
If you want his foot to be flat on the floor when his leg is out right you have to rotate the thigh. But this can look really un natural in some poses or if you have the knee bent it doesn't work. Basically if you think about the fact that your foot rotates slightly at your ankle like your wrist does, a figure should be able to replicate that for posing
@@CraftyGeckoyour foot does not rotate at your shin tho.
@@CaptainRockoBD no it rotates at the ankle, but you can't cut that low down because there's already a joint there.
DUDE how did you remove his chest, I placed my figure during 4 looong hours in hot water and I still can't remove it, how did you do this pleaaaaaaase 😭
I had to use a dremel to reduce some of the socket around the ball joint, hot water helped but it definitely wasn't enough on its own
@@CraftyGecko What is a dremel ? (i'm french maybe it's why i dont see what it is)
Nevermind I found out what it is, thank yo uvery much for your answer
No worries, you can get them pretty cheap from amazon
What do you cut the neck piece and foot with?
Scalpel for the neck, jewellery saw for the feet
i cant take out the abs ,what should i do?
Theyre very difficult to remove, if you can't get them out, don't. It's not worth breaking the figure for
Poderia trazer aquele tutorial de cortar a parte do pescoço?
Mostro mais no meu outro vídeo. o tobey maguire tem uma explicação melhor. aqui está o link - th-cam.com/video/5O8Byov4z9E/w-d-xo.html
You should do a tutorial on the toe articulation
I have done, there's a TH-cam short that explains it better
Are you going to be making any more Spider-Man stuff?
Yes I will be
@@CraftyGecko I am interested in the MCU mask holding hands
I'll be restocking my etsy soon
This is crazy good 👍
Thank you!
Obviously, I don't know the legality of selling these custom pieces since Spiderman is a copyrighted thing, and they definitely wouldn't pass on the opportunity to sue someone
Yeah, I have a load of stuff on my etsy but I think I'm going to have to make the titles more subtle
@CraftyGecko I've already been silenced regarding this topic, which is ridiculous because there's always a grey area when it comes to selling third-party accessories like these
Who silenced you?
@CraftyGecko The doctor who community when I brought up the potential legality of selling 3D printed sculpts/casts somebody already made sculpts for the 14 and 15 doctors and are trying to sell them without the permission of character options or the BBC bad wolf since there's multi companies involved in it's production now. making it a string of ownership, meaning there isn't just the BBC to consider if they were to go after someone but rather multiple partys so even they wouldn't pass on the possibility of sueing someone, hence why sales of these items create grey areas because your profiting off of something which is copyrighted
Oh, right. For the most part, you can get by if you don't advertise it or brand it as a copyrighted name. For example, I have stuff on my etsy under "amazing arachnid" or "friendly neighbourhood" to make sure I'm treading as lightly as possible
Are you taking any commissions to have this done to a figure?
If you mean on etsy then yes, they're sold as pairs
With the hinge feet, are you getting doth Right and left foot, same as the wall crawling hand?
I'm sorry I font understand?
Why does the Andrew head you made look a bit to small when it’s put on the figure
I dont think it does? It's the correct size, it's actually the same size as the masked head. Maybe it's just the perspective of the camera
Would you do Spider-Man 2099 as well if you had one?
Absolutely
@@CraftyGecko Nice because I need some help with doing my own little mod. Mostly for articulation since 2099 is so stiff when it comes to articulation.
Looking forward to it.
@@GLAPostalService1 I'm going to try and get one relatively soon and then take a look at it
@@CraftyGecko All good man, inspect the goods for as long as you need. But I wasn’t kidding when it’s stiff in articulation. I’ve had to dremel a fodder of a 2099 figure for the leg’s articulation to be better.
Damn, sounds like a lot of work
bro can u make a tutorial (in detail)on how to do the feet articulation at 3:43
I have a detailed tutorial of it in the original tobey maguire video. I dont make toe joints like this anymore so I'm afraid that might be the best I can offer
Very awesome.. 👌🏻
do you have a link for the small steel rods?
I dont I just had them lying around. If you search steel rod on ebay or amazon they tend to come up there. You want around 1.5 to 3mm diameter ideally and obviously something to cut it down with
天才だ…顔パーツほしいな…って思ってたら出てきたよ…
SHフィギュアーツ超えてるでしょ？
どうもありがとうございます！ SHフィギュアーツは持ってないけどあったほうが良いかも
次回の動画も楽しみにしています！
😍😍😍
😁
Have you got the comic iron spider suit?
Not yet but i will be, I have the takara tony upgrades ordered for it
@@CraftyGecko oh it’s my favourite suit that’s all
@@CraftyGecko u got to make a video about it tho
I've just got one, I'll be making a video as soon as I have my upgrade stuff for it
where do you buy the dremel tool and the mini steel rods?
Just off of ebay or amazon. If you search rotary tool you'll probably find the one I have
thank you!!
@@misterknight__1176 no worries!
Did you Dremel more around the ball joint to get it free so you can take it apart or was it hot water
I did, that's what I'm referring to when I say rotary tool
@@CraftyGecko ok thanks you