Absolutely incredible job on the arms! They look great. Disappointed on how bad Hasbro dropped the ball with the Marvel's Spider-Man 2 Peter Marvel Legends figure.
@@CraftyGecko No problem. I was hoping to see Hasbro put the same level of effort as they did with the Miles figure. It's super disappointing for me because I love the advanced suit 2.0. So much better than the first advanced suit in my opinion.
Honestly if you can afford to get a printer then go for it, but if you don't have much experience 3d modelling don't expect to be making complex parts, that was a mistake I made when I started
I get quite excited when you post a video 😅. You're becoming one of my favourite customisers. I've followed your etsy. These waldows are fantastic. I would love to see you tackle a set of articulated claws for Doc Oc .... I'd buy in a heartbeat !! 👏👏😎.
Awesome! I did this too but I used some spare waldos from a broken figuarts, when you repaint the blue be really carefull around the back logo, I found it really hard to paint around
Thank you! Unfortunately I won't be selling my files anymore as another customiser has bought my files and sold them off as his own, such a shame that the greed of one person has ruined it for everyone else
Its such a shame, I liked being able to give people the files for much cheaper than the actual items to help the community out, some of my files even used to be free
Are you planning on repainting the advanced suit 2.0 cause the suit is missing two lines that is in the upper torso like a blue line I don't how to describe it but you can search up the suit and compare it to the fig to the game model
This is just beautiful! Makes this figure so much better. Do you plan on selling the Spider Legs as well? And you said your gonna repaint the figure are you gonna make it accurate to the game? By adding the blue lines on the torso?
Resin printers aren't the best for ball joints because stamdard resisns can wear down quickly, that being said, 0.3mm is the tolerance I tend to use. If the ball is 5mm, the socket should be 5.3mm. Same rule applies for pegs and connections. Socket wise, you want it to come just past the widest part of the ball, that way it's a solid hold but can be popped in and out easily. I also put cuts in sockets sometimes so the resin has enough flex to take the ball. I hope this helps!
Dude, my jaw literally dropped when I saw them chromed. Would have definitely wanted something like this if I cared to buy the actual figure. I honestly think a repaint and maybe a new head sculpt (having seen some of your other work) would give this figure an entire new feel.
Thank you so much! I would love to try another headsculpt, just not sure I'll have time to do it with all the other work but I really appreciate your support!
Hey is it possible if you could work something out similar to this for the MCU Iron Spider , i had the 2 pack one but it was flimsy and broke too P.s. do make a community post about this iron arms when they out for sale ,coz these r lit
Great job on the custom! But, to be honest, NOTHING is saving this figure man, Marvel Legends literally created the PERFECT PS5 Miles figure, thats this figure just looks out of place next to him
@@CraftyGecko Ah sorry, I thought you used a different type of resin to print the joints. So did you have to buy the joints and if yes where can you get some?
The sad part about this is people LIKE EVERY PERSON DOES THIS WAY BETTER THAN HASBRO. Hasbro you need to step up its sad that we have to watch SOMEONE REDO YOURE MISTAKES. But overall this is a good video!
Credit to Kyle on Instagram for the huge inspiration! instagram.com/kyle.c1997?igsh=cGo0eHJhdmd3aXdm
Absolutely incredible job on the arms! They look great. Disappointed on how bad Hasbro dropped the ball with the Marvel's Spider-Man 2 Peter Marvel Legends figure.
Thank you! Its such a shame, they did so well on the original miles sculpt wise but only gave a new head for this one
@@CraftyGecko No problem. I was hoping to see Hasbro put the same level of effort as they did with the Miles figure. It's super disappointing for me because I love the advanced suit 2.0. So much better than the first advanced suit in my opinion.
Yeah I completely agree
The arms aren't on etsy yet but they will be after I make the modifications mentioned in the video
How much would the arms cost when they go on etsy?
Can you please add it to your shop or the shop you out in the description please
@jaimecortes5973 that is etsy, and they are not ready yet
@@JaquanJingle I would probability sell them for £16 but I need to see howmuch they cost to make first
@@CraftyGecko alright
WAS NOT EXPECTING THIS TO DROP (I am excited to see what you do with this figure next)
Gotta make the most out of the figure while it's relevant 😅
Wow the way to put the arms on the back with that little clip is freaking genius
I would so buy those arms
Thank you! I think I saw it on Instagram for something else but it worked really well. I'll have them for sale by next week
@@CraftyGecko sweet I just bought the Andrew Garfield mask hand!!
Thank you!
I’m so excited for you to drop the waldos. Ive been searching for alternatives to use so you’re literally my savior
I'm aiming to have working ones by the end of the week
@@CraftyGecko Cant wait!!!
Dude you are clever as hell. These mods from the web shooters to the wings to the legs. So impressive.
Haha thank you!
You should definitely make some web-Wings for the Miles Morales Figure
I will be doing that in his upgrade video! There's a nice red gradient on his
That blue was a great touch
Thank you!
You say you’re going to sell the arms is a god send because Peter needs them to complete the look
I'm still working on getting them set for proper selling but they're getting there
This was fire! Great job 🎉
Thank you!
i love that you have the Adam Savage ruler tattoo c:
Thank you!
My algorithm is killing me! I'm so SO close to just buying a 3D Printer for this stuff
Honestly if you can afford to get a printer then go for it, but if you don't have much experience 3d modelling don't expect to be making complex parts, that was a mistake I made when I started
I get quite excited when you post a video 😅. You're becoming one of my favourite customisers. I've followed your etsy. These waldows are fantastic. I would love to see you tackle a set of articulated claws for Doc Oc .... I'd buy in a heartbeat !! 👏👏😎.
Thank you so much! That means a lot, I'll take a look into the doc oc claws!
@@CraftyGecko thank you 🤞😎
Awesome! I did this too but I used some spare waldos from a broken figuarts, when you repaint the blue be really carefull around the back logo, I found it really hard to paint around
Oh nice! And thank you!
sick my dude
Thanks!
Bro those spider arms are so cool!
Thank you!
I think you should paint the blue black on spidery it would look pretty dope
That would look really cool! But I think I'm going to paint him with a more accurate blue
That looks so incredibly cool, I'm sorry it got damaged that'd be rough. But wow that is so so cool I'm extremely impressed.
Thank you so much!
@@CraftyGecko of course!
Very impressive, you should attempt to make some of his gadgets like a spider-drone or his phone.
This is a good suggestion!
Are planning on making a version that uses the hole plug on the back of figures to hold the arms?
I could definitely look into it!
@@CraftyGecko that would be awesome
This is really good you should try make Peter in his Anti venom suit
Thank you! I would really like to
Would love to see you sculpt the spider and give it a repaint, great work!
Thank you! I hope too
That back clip was genius
Thanks!
Hey! Great job! Are you planing to sell the 3d model too?
Thank you! Unfortunately I won't be selling my files anymore as another customiser has bought my files and sold them off as his own, such a shame that the greed of one person has ruined it for everyone else
@@CraftyGecko Damn that's disappointing. Sorry I didn't know. Still Im looking forward for your next videos! Especially the painting of the figure
Its such a shame, I liked being able to give people the files for much cheaper than the actual items to help the community out, some of my files even used to be free
I made the spider arms with straws before you but for a ps5 controller
But your is a little better quality
They look really good! I just went and watched
Thank you I think you just got a new subscriber
Thanks!
anytime
Are you planning on repainting the advanced suit 2.0 cause the suit is missing two lines that is in the upper torso like a blue line I don't how to describe it but you can search up the suit and compare it to the fig to the game model
Yes I am, that's one of my next videos. Maybe not the very next but one of the next couple
I can’t find the spider arms on your Etsy
The pinned comment explains this 🙂
@@CraftyGecko oh guess I am dumb sometimes I just don’t look and stuff and think
Thats ok, I have days like that too
@@CraftyGecko 👍🏻
This is just beautiful! Makes this figure so much better. Do you plan on selling the Spider Legs as well?
And you said your gonna repaint the figure are you gonna make it accurate to the game? By adding the blue lines on the torso?
Thank you! I will be selling it them soon. I'll be repainting it and adding some sculpt to make it more accurate
how much will the legs be?
I need these for my stop motion videos but 3-D printers are so expensive 😭😭😭
I sell the webwings on my etsy and I'll have the legs there soon too
Can we buy the spider arms? I didn’t see any on your Etsy shop
I would buy those unpainted and unassembled for 12-20$ any day
Thank you, im still trouble shooting a couple issues
This is sick !!!!!
Thank you!
Question will the metal arm be on sale?
Yes, I think i explain towards the end of the video the modifications I'll need to make to it before it's ready to sell
make one for the iron spider from mcu too man it would be lit
True!
Can you do a tutorial on how to make these
This is the tutorial. My laptop isn't strong enough to run recording software so I can't record my designing process
Like the finger nail polish
Thank you! I've got fun ones for the next video
Do you think it would be possible to make the logo look a tiny bit 3d so it can match with miles better
Hi inky
Thats one of my intentions with the next step!
@@CraftyGecko swag
How much will the legs cost? Srry ur etsy store is closed, so i dont know.
I havent actually sold any yet so there currently isn't a confirmed price
We need more people like this at Hasbro.
If they're hiring I'll take a job 👀
I can’t find the legs on the store
Theyre not for sale
This is straight fire! Any word on when it goes up on etsy?
I'm hoping to have them working by the end of the week with stock ready before the new year
@@CraftyGeckowill you sell the files ?
Cool but I would give him a repaint to make him more accurate to the game
Thank you, thats my plan for another video
a thing of beauty
Thank you!
Amazing great job!
Thank you!
The iron arms are TOO GOOD for the figure🕷️
Thank you!
You should make some effects for ps5 miles yoo
I will be giving him web wings too
@@CraftyGeckonice!
Can you bro pls do the same with sh figuarts Spider-man ps5 and also make a black suit. Pls love yyour work.❤
Thank you! I don't have the shf unfortunately, and it's a little out of my price range. I have done a black suit but im editing it at the moment
When will this be available dude????
I'm hoping to have some up this week
I couldn't find the iron arms on ur etsy, are they on there yet? i found the web wings tho
No, the updates to the file that I mentioned are something that could take some time
k, thanks@@CraftyGecko
Amazing 🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥
Thanks!
Are the Arms on your Etsy store? I can’t find them.
They're not yet, I still need to modify the file
Do you have any tips on modeling and printing ball joints? I bought a 3d printer and want to start making my own figs
Resin printers aren't the best for ball joints because stamdard resisns can wear down quickly, that being said, 0.3mm is the tolerance I tend to use. If the ball is 5mm, the socket should be 5.3mm. Same rule applies for pegs and connections. Socket wise, you want it to come just past the widest part of the ball, that way it's a solid hold but can be popped in and out easily. I also put cuts in sockets sometimes so the resin has enough flex to take the ball. I hope this helps!
@@CraftyGeckoit does thanks!
No problem!
It's been 10 months. Please post them
They weren't durable enough
Here before this goes viral
What is happening?! This video had gone mad 🤣
Dude, my jaw literally dropped when I saw them chromed. Would have definitely wanted something like this if I cared to buy the actual figure. I honestly think a repaint and maybe a new head sculpt (having seen some of your other work) would give this figure an entire new feel.
Thank you so much! I would love to try another headsculpt, just not sure I'll have time to do it with all the other work but I really appreciate your support!
Hey is it possible if you could work something out similar to this for the MCU Iron Spider , i had the 2 pack one but it was flimsy and broke too
P.s. do make a community post about this iron arms when they out for sale ,coz these r lit
I might be able to at some point in the future, I'll be sure to do a community post for the legs
VERY great upgrade. Way better then Hasbro made
Thank you!
Amazing!
Thanks!
@@CraftyGecko :)
Would you sell those arms on your store?
Yes once I've made some fixes to them
Are you still going to sell these?
No, they ended up being too fragile. The stl files are on cgtrader
Looks better the Hasbro stuff lol. Impressive
Haha thanks!
Would you sell the web wings stl?
I dont have it anymore unfortunately. I lost it in the transfer if laptops, all I have is the print file on my printer
Bro u gotta start selling these
I do sell the wings, the leps will be available soon
@@CraftyGeckolegs*
Haha legs yes
Great job on the custom! But, to be honest, NOTHING is saving this figure man, Marvel Legends literally created the PERFECT PS5 Miles figure, thats this figure just looks out of place next to him
Thank you, yeah it looks really out of place, I'm going to give it a full workout and hope I can bring it closer to miles standard
Sorry but the fig can't be saved.
Not with that attitude it can't
@@CraftyGecko it's too buff
It is, but if someone was willing to put in the work they could fix it
what resins did you use for the parts?
Its just standard 3d printing resin
@@CraftyGecko dont the parts break when you try to articulate them?
No because they articulate at the white joints
@@CraftyGecko Ah sorry, I thought you used a different type of resin to print the joints. So did you have to buy the joints and if yes where can you get some?
Theyre bought from hobby plaza I think?
Gimme now!
Haha not yet, there's more work to be done
How did you get the other open hands
The select spidey, thats one of the mods I'm talking about at the beginning of the video
IIII NEEEEEED THIIIIIIS
Haha thank you
I wish I have 3d printer😞
Theyre very useful, but I only got mine because a car reversed into me and I was given an insurance payout
@@CraftyGecko zamn I really need 3d printing to make spiderman headsculpt 😫
That $40 spider man was not worth it 😢
It really wasn't. They dropped the ball hard on this one
❤👍😎
👍
The sad part about this is people LIKE EVERY PERSON DOES THIS WAY BETTER THAN HASBRO. Hasbro you need to step up its sad that we have to watch SOMEONE REDO YOURE MISTAKES. But overall this is a good video!
Thanks! It is frustrating that they need fixing but I do enjoy the process
@@CraftyGecko Ikr its sad to see you do all the work that hasbro can never make bc there lazy
Holy fart dude
Jesus farts?
@@CraftyGeckonever thought about that