Hello Friend, good afternoon, I really enjoyed your video, was the most correct I watched, did the whole process, but the spindler heats up a lot, I tried to redo and it was the same thing, is it anyway? does he overheat?
Right. I'm pretty sure that P00.00 should be set to the Hz rating of the motor. According to manuals for similar VFDs, the "Main Frequency" is per this description. " In the digital operator mode, the inverter will run at the set value of PD003 (Main Frequency or P00.00). During running, the operating frequency can be changed by pressing ▲ or ▼. During multi-speed running, the main frequency is taken as the frequency of Speed 1." It is not meant to be set to the Hz rating of your 110 or 220 power input. Think of it this way. Why would you be able to set it to 400Hz when there are no power grids in the world with that rating.
Girl I have been following you for about a year, and I still look stuff up click the first thing. Then look at the publisher and say of course its @Maker Tutor
@@MakerTutor101 P0023=6 P0024=9 you can only show 4 or 3 numbers. 24000rpm = 2400 or 240. Very well explained on the Ingo Tipps channel th-cam.com/video/I802YXMy1Ww/w-d-xo.html
Best video ever I watched overall about vdf and spindle combination, well done thanks.
Where is the settingh up of the water pump circuit in the video please?
Its not in the video but I expect its a simple Pump > Spindle > Radiator > Pump loop using tubing...
Hello Friend, good afternoon, I really enjoyed your video, was the most correct I watched, did the whole process, but the spindler heats up a lot, I tried to redo and it was the same thing, is it anyway? does he overheat?
el mio tambien se calienta mucho
Hi, did you figure out why i gets hot?
Hi mine is 110v 1.5kw air cooler i did the same process but show er4 any ideas 💡 thanks
Hello freind, can i have the configuration for 2.2kw
Is this 220v? Btw, on the manual say P00.00 have to set to 400... is the any problem if i set to 50?
Right. I'm pretty sure that P00.00 should be set to the Hz rating of the motor. According to manuals for similar VFDs, the "Main Frequency" is per this description. "
In the digital operator mode, the inverter will run at the set value of PD003 (Main Frequency or P00.00). During running, the operating frequency can be changed by pressing ▲ or ▼. During multi-speed running, the main frequency is taken as the frequency of Speed 1." It is not meant to be set to the Hz rating of your 110 or 220 power input. Think of it this way. Why would you be able to set it to 400Hz when there are no power grids in the world with that rating.
how long do you think the bearings will last,Im looking to buy one.thanks.
You could replace the bearings with quality brand name ones pretty easily. They're just pressfit onto the shaft
Girl I have been following you for about a year, and I still look stuff up click the first thing. Then look at the publisher and say of course its @Maker Tutor
Love you!!!!!
1.5? 220v? Why not get the 2.2kw?
Great job thanks sir very useful thanks
I got 120 vac in Canada. Can I still make it work?
DIY laser cutter in next video
Verygood. Im clear a++
How config this vfd for rs485?
Hello, How can you display rpm instead of frequency?
For this model YL620-A, I have tried and tried it. It cannot be displayed as RPM.
@@MakerTutor101 P0023=6 P0024=9 you can only show 4 or 3 numbers.
24000rpm = 2400 or 240. Very well explained on the Ingo Tipps channel th-cam.com/video/I802YXMy1Ww/w-d-xo.html
please answer guys ... why my spindle very hot?
tambien el mio se calienta
Did you figure out why it gets hot?
@@cristhianodamata Pudiste resolver lo de la temperatura?
@@CarlosManitasV not no yet
@@cristhianodamata No lo puedes usar entonces? Yo lo acabo de comprae
Best videos ever aseen
how to set up a 2.2kw spindle
Wow A little narration would have helped.
Nice video
remove the music please, some of us are actually interested about the noise.
Would have been useful to actually hear it instead of that godawful music.
Get rid of the music, horrible.