Deshroud the GPU and put full height fans in bottom instead for less noise, particularly turbulence. It's amazing in general and especially with this case. (Exhaust at bottom, seems to be the way to go, looking at optimum techs data)
Don't save too long. Mini ITX cases have a habit of being constantly sold out until they're discontinued. It's only $109.99 with the glass and regular side panel, as well as the card riser, on Amazon. Check often! They restock it a lot.
JLawL I meant saving the video if I ever decide to go to a mini ITX build lol but yeah you’re right. As much as I want to buy stocks immediately, building a pc here is expensive from where I am plus there are other factors too like compensation and scarcity of pc parts
My 1st build in 10-11 yrs also. Old build was in Cooler Master Storm Sniper case that is huge and like 36 lbs. The parts in wont even be worth listing on eBay for sale at this point
Very nice video my friend. I'm building a similar rig currently. NR200p, i5 10600k, asrock z490m-ITX ac, Gskill trident neo 3600mhz cl16 ram. I decided to go X53 cooler so I can chose bottom rad mount or side mount. Want to be able to show off my gfx card with glass side panel. (yes I know it's not the best for temps). Same power supply and for the SSD I went with the Kingston A2000. Best bang for buck NVMe SSD right now.
hey dude! That's so crazy I've been looking at itx cases since April because I want to replace my grand tour I built 10 years old too 😅 I actually finally settled on the idea of getting the NR200 but I cannot find in stock anywhere atm. You're lucky man! enjoy
4 ปีที่แล้ว
FRY FPV I’m in the same boat. Looking to upgrade my Core i7 2700k GTX 570 SLI rig in an Antec 1200 with an itx build super close to this one. Stile debating 10700k vs 3900x...
Don't know where you from but they are in Stock at Amazon in the EU. www.amazon.co.uk/Cooler-Master-MasterBox-NR200P-Computer/dp/B08BK6W7CS/ref=sr_1_1?dchild=1&keywords=nr200p&qid=1600113677&sr=8-1 amazon.de/Cooler-Master-Mini-ITX-Gehäuse-PCI-Riser-Kabel-Steckplätzen/dp/B08BK6W7CS/ref=sr_1_3?__mk_de_DE=ÅMÅŽÕÑ&dchild=1&keywords=nr200p&qid=1600113683&sr=8-3
i had a ncase m1 v2 few years ago and it was smaller than this but i put same size cmponents of the video's one. Now i have a used cooler master haf X 🤣🤣
My build is waiting on a few parts to arrive. Case- Nr200 CPU- Ryzen 5800x Motherboard- GIGABYTE B550I AORUS PRO AX RAM- CORSAIR Vengeance LPX 32GB (2 x 16GB) 288-Pin DDR4 3600 PSU- Corsair SF600 Storage- Samsung 860 EVO 500 AIO- NZXT Z63 GPU- Still searching FANS- Thermaltake Ring Trio ARGB (for now) NVME coming up too.
How funny. I'm awaiting delivery of the same case and a pretty similar set of components. Updating from a 10 yr old HAF 932 lga1366 build. Guess we cracked at pretty similar times ! Good luck with the 3080, keeping my fingers crossed im not too far down the list.
liked and subbed, good luck to your channel, i really appreciate how you showed the entire process start to finish, for someone looking to build with the same case and parts it really helps me plan things out
Nice build! How has the temperatures been for the gpu and cpu? :) If you fit two fans at the bottom can you still fit a 3-slot Gpu? Also how are the noise levels?
is pretty much impossible to find this case anywhere right now i dont know what ill be waiting loonger for the case the psu or the 3080 or the rest of my parts ive actually ordered already
Wow I just did a build with pretty much the exact specs except 1TB SSD and no others. Looks like the radiator mounting was pretty easy for you. I couldn't get it to line up properly no matter what I tried. Got it in the end though.
i did the same thing, first build in over 10 years from intel i7 920 and a big outdated inefficient pc. Went with mini ITX Z490 by ASRock and i9 10850k. Vengance and 750W same as yours. I am not so impressed with the speed upgrade from 10 years of generations. I thought it would be faster but then again I am using still my old SATA SSD. Have not upgraded yet to the NVME. But, i thought the processor would perform way faster for 10 years advancments.
TechHeadPang yes over clocking saved me too . That’s pretty impressive speeds I was able to get my 920 to 4Ghz on the hyper 212+ which I am now using on my i9 on stock settings. Did you overclock your i9 yet or play with the bios settings ?
I love how much you can fit into that little case. I have 5 hard drives, 2 M.2s, 2 2.5 HDDs, and one WD Black 3.5. Altogether being 18TB with a radeon 6900xt and a Ryzen 5900x, with thermals never breaking over 75C even when mining
I know! Thanks to the "Great PSU Shortage" the SF750 was the final part I needed to get to complete this system. I ended up biting the bullet and purchasing from Amazon for about $20 over retail price... best of luck finding one!
@@TechHeadPang like where I bought my case... you can also buy that power supply. the site is shopblt.com, originally I was a little sketch, but this site is great. They order directly from the manufacturer and a lot of people recommend it.
same here im trying to get the case and psu atm sold out everywhere im trying to get the new coolermaser sfx psus there soooo much cheaper than corsair only gold though over corsairs plat ones but still
I just ordered my case and I'm hoping to have it here in October. I have the exact same setup but I'm on AMD instead of intel. I'm also trying to fit the 3080 in this little case haha. Good to see the build process. cheers mate
4 ปีที่แล้ว +1
Bryan Gworek where did you order it from I can’t seem to find it in stock anywhere
Nice job! I have the same case and same aio but I can't seem to screw the rad to the side panel like you have done. It doesn't fit into the inside recess of the side panel. Seems like the rad is about 1mm too tall.
I am trying to build something similar. I am also using the NR200 Case, B550I AORUS PRO AX and a Ryzen 9 3900X. I am not using a video card as I just needed to power of the CPU but I am adding fans to the top ad bottom of the case ( pulling air from the bottom and exhausting out the top) I also purchased the Kracken X63 but I can't seem to figure out where the connections go. Did you using extenders or splitters for your connections?
Now that practically Nvidia killed the SLI it doesn't make much sense to invest in an ATX motherboard unless the buyer wants to use 4 memory modules but even a Micro ATX has support for 4 memory modules. I always thought that for games a mobo mini-ITX or micro-ATX is enough. From what I saw this NR200 is a beautiful case, it seems to be a little too big for a mini-ITX configuration but that's fine. R.I.P SLI.
They went OOS pretty fast up here in Canada but I got on board with the pre-order as soon as they allowed it on Amazon. AFAIK they're still taking pre-orders for the NR200P which releases on September 16th so might be the same in your market.
Hey, awesome video, it was very relaxing! One question though, aren’t the fans on the kraken backwards? Shouldn’t they be on the opposite side for intake and cooling on the radiator? The way you showed on the video, they are just blowing air inside the case and the radiator is getting no cooling at all, I’m sorry if I misinterpreted.
Doesn't matter what orientation the fans have as long as they are drawing air from outside the case and through the radiator. The fans are oriented in "pull" so they are pulling air through the radiator fins from outside. They can also be oriented in "push" (as you are referring to) where the air is pushed through the radiator fins, but there is negligible difference in performance between "push" and "pull". Some will prefer "pull" as the dust will be caught on the radiator surface, making it easier to clean.
Hi thanks for the video I’m doing almost the same build just wondering how you connected the aio pump, radiator and case fans to the 3 headers on the board .
1 fan splitter for each of the 3 headers. Header 1 powers/controls the bottom two fans, header 2 connects to the rad fans, and header 3 connects to the two top fans. AIO pump connects to the CPU fan header next to the 8-pin power connector.
Does your CAM software read the radiator fan speed? I have a similar build but my radiator fan speed does not show up in CAM. Only on Hwinfo64 they show up.
The FE is actually better for the other components since most of the heat is exhausted from the back of the PC and the heat pushed by the fan on the back of the card is almost negligeable. Standard cards just dump all the heat into the chassi. What will help in all type of cards is the top right fan, the one over the PSU.
How did you wire the noctuas up to the sys fan? I have a similar setup but for whatever reason the fans run at speed and I cant rev them down even though theyre pwm.
Nice build, I am looking to build a mini itx case rtx 3070 rig once the gpu is out, the only thing, i don't know if you can run raid storage when it comes to mini itx.
I put the H115i Pro XT into my NR200 and it sort of fits... You can only fit 6 of the 8 total mounting screws into the Radiator mounting plate of the case. Then getting the rad into the case is the second challenge with its length slightly longer by 1mm - 2mm than the case opening. To get around this, you need to take the top left rail off (@ 2:48 the left top rail with 4 screws). This will allow you to ever so slightly squeeze in past that 1mm. Once in it all fits nice and easy.
Thanks for sharing it. I have the same components. How do you manage the fan connections? Because there are six fans and the motherboard just 3 fans connectors. I believe you use the cpu fan for the pump.
Hi. would anyone know if the NR200 supports small micro ATX boards? my MSI micro ATX is 22cm x 18cm. on paper, it'll fit (NR200 supports 24x22). Just want to know if someone has done this before i buy one.
the gpu fans and noctua fans are constantly fighting against each other... noctua is trying to pull and the gpu fans are trying to push, idk if that is something legit, i fix my airflow of my case and i'm getting a 20%increase at the benchmarks!
Man idk why but I have a hard time believing someone hasn’t found a way to have the AIO mounted on top. It would be so much better. There has to be a way. Not even a slim rad and fans combo wont fit up there?!
@@TechHeadPang Also if you have an SFXL power supply in there you literally just don't have the room to mount a radiator (I use an SFX L in mine and you can't even fit a normal size fan there isn't enough clearance) though I've heard you may be able to mount a 15mm thick fan I haven't had the chance to try myself though
There are a official PSU bracket for this case that let you use a full ATX PSU, in the official page of CM you can download the files to print your own bracket.
Do you find that the bottom fans help thermals? I'm assuming you have them set up as intake and the top as exhaust. I've been reading conflicting things online. Also, did you use a fan hub or did the motherboard have enough fan headers?
Yes optimum tech made a video seeing what itx cases the 3089 fe would work with this was one of those cases this the video th-cam.com/video/J8NXraJiJsU/w-d-xo.html
I’m planning my first pc build just like this! How did you go about connecting all the fans? Are there enough fan headers on the itx motherboard or is a fan controller needed?
Typically 2-3 headers on an itx board. You would need a fan hub which is powered by either molex or sata cables. Most hubs can use the pwm from your motherboard or don't connect it and have them all run at full speed. Depends on your application. This is the one I use in my nr200 with 7 fans. www.amazon.com/dp/B077YHLDSP/ref=cm_sw_r_u_apa_i_BTeFFbAVEE3KY Exhaust and AIO pump connected to the mobo fan headers. The other 6 fans connected to the hub.
I got a build in that case too. A 3700x cooled by a fuma 2 with noctua fans at 100% during prime 95 small FFT give me a delta temp of 38c. Same test with an ultra quiet profile, fans runing at 1000 rpm i get 47c delta T. For the GPU i can't tell i got a crappy GPU waiting for a 3080
![PASULOL รามเกียรติ์ ตอนที่ 4 นนทกพบรัก [Ramakien Ep.4: Nonthok in love]](http://i.ytimg.com/vi/tMUQgmZzf_A/mqdefault.jpg)
Deshroud the GPU and put full height fans in bottom instead for less noise, particularly turbulence. It's amazing in general and especially with this case.
(Exhaust at bottom, seems to be the way to go, looking at optimum techs data)
Or in your case, maybe even thicker fans, if you can find them 🙂
Perfect cable management, awesome.
Holy shit that peg style ssd mounting system is awesome
That music was on point!! nicely done, this its exactly what I looking for for my 1st build
Great build mate. I've been trying to get my hands on one of these cases for a while but there are always out of stock.
not even listed on the US CM store either...
Snagged one a few days ago when amazon restocked for like 5 hours. Gotta check the sff subreddit.
@@loganbrown9845 thanks for the heads up
They’re back in stock on Amazon!
@@UFOBradConcert Just bought the last NR200P in stock!!! At least from Prime lol
I'm picking up same case on Monday 14 Sept :) will use this video as reference
Hi, from where will you purchase it? I`m looking for this case for a while but I can`t find any stock
@@radunastase1865 JW Computers in Sydney. Awesome case, was able to fit in 280mm AIO and 330mm gpu. Storage options is good too.
Literally has the same build as me except I used AMD platform.. great job!
Great vid man. I snagged one of these babies and movie my itx build into it. Its stuck in an old full tower case from 2011 lol
Saving this for future reference. Awesome build. This will be my endgame pc build
Don't save too long. Mini ITX cases have a habit of being constantly sold out until they're discontinued. It's only $109.99 with the glass and regular side panel, as well as the card riser, on Amazon. Check often! They restock it a lot.
JLawL
I meant saving the video if I ever decide to go to a mini ITX build lol but yeah you’re right. As much as I want to buy stocks immediately, building a pc here is expensive from where I am plus there are other factors too like compensation and scarcity of pc parts
wow, your build is my dream system. Great job
Great build, looking forward to seeing that 3080 fit with those fans on the bottom!
You and me both! Still finding it super difficult to get my hands on a 3080 :(
My 1st build in 10-11 yrs also. Old build was in Cooler Master Storm Sniper case that is huge and like 36 lbs. The parts in wont even be worth listing on eBay for sale at this point
me too man! im just waiting on rtx 3080 and ryzen 4000 cpu
Exact same boat, good luck getting your 3080, I hear they’re gonna sell out right quick lol
Very nice! I plan on shrinking my system down to this case or the H1 next year after I get my gpu this Christmas. :)
Very nice video my friend. I'm building a similar rig currently. NR200p, i5 10600k, asrock z490m-ITX ac, Gskill trident neo 3600mhz cl16 ram. I decided to go X53 cooler so I can chose bottom rad mount or side mount. Want to be able to show off my gfx card with glass side panel. (yes I know it's not the best for temps). Same power supply and for the SSD I went with the Kingston A2000. Best bang for buck NVMe SSD right now.
hey dude! That's so crazy I've been looking at itx cases since April because I want to replace my grand tour I built 10 years old too 😅 I actually finally settled on the idea of getting the NR200 but I cannot find in stock anywhere atm. You're lucky man! enjoy
FRY FPV I’m in the same boat. Looking to upgrade my Core i7 2700k GTX 570 SLI rig in an Antec 1200 with an itx build super close to this one. Stile debating 10700k vs 3900x...
Don't know where you from but they are in Stock at Amazon in the EU.
www.amazon.co.uk/Cooler-Master-MasterBox-NR200P-Computer/dp/B08BK6W7CS/ref=sr_1_1?dchild=1&keywords=nr200p&qid=1600113677&sr=8-1
amazon.de/Cooler-Master-Mini-ITX-Gehäuse-PCI-Riser-Kabel-Steckplätzen/dp/B08BK6W7CS/ref=sr_1_3?__mk_de_DE=ÅMÅŽÕÑ&dchild=1&keywords=nr200p&qid=1600113683&sr=8-3
@@NicoLorentz so.... I actually saw one on Amazon today and jumped on ordering it 🤗
@ oh... I actually ordered a 3800x. But I'm returning it because AMD is going to release the 4000 series in few weeks
FRY FPV lol I just ordered the 3900x I’m still looking for the NR200 and SF750. I’m thinking about getting them both from shopblt.
Every NR200 build I see on TH-cam just convinces me more that it's the perfect case. Nice build, can't wait to see the 3080 upgrade and performance.
i had a ncase m1 v2 few years ago and it was smaller than this but i put same size cmponents of the video's one. Now i have a used cooler master haf X 🤣🤣
My build is waiting on a few parts to arrive.
Case- Nr200
CPU- Ryzen 5800x
Motherboard- GIGABYTE B550I AORUS PRO AX
RAM- CORSAIR Vengeance LPX 32GB (2 x 16GB) 288-Pin DDR4 3600
PSU- Corsair SF600
Storage- Samsung 860 EVO 500
AIO- NZXT Z63
GPU- Still searching
FANS- Thermaltake Ring Trio ARGB (for now)
NVME coming up too.
you pretty much nailed the spec on this. wondered if the 280m rad would fit or not. thanks for posting
Great build dude!
My tests indicate it is slightly better to put the swap out the Noctua fans onto the radiator.
How funny. I'm awaiting delivery of the same case and a pretty similar set of components. Updating from a 10 yr old HAF 932 lga1366 build.
Guess we cracked at pretty similar times !
Good luck with the 3080, keeping my fingers crossed im not too far down the list.
Love it. The HAF 932 is the big case in the last shot of the video if you needed a size comparison.
liked and subbed, good luck to your channel, i really appreciate how you showed the entire process start to finish, for someone looking to build with the same case and parts it really helps me plan things out
Thank you! Let me know if you have anything specific you want to see in the future.
Nice build! How has the temperatures been for the gpu and cpu? :) If you fit two fans at the bottom can you still fit a 3-slot Gpu? Also how are the noise levels?
Great production value!
Much appreciated!
Perfect video, I was wondering if my Kraken X63 would fit.
Best itx case on the market! Love mine!
Nice build!
I'm gonna make pc in this case too
Damn dude, your video blew up!
is pretty much impossible to find this case anywhere right now i dont know what ill be waiting loonger for the case the psu or the 3080 or the rest of my parts ive actually ordered already
Snagged one a few days ago when amazon restocked for like 5 hours. Gotta check the sff subreddit.
Logan Brown yeah my pc store now says eta November
Wow I just did a build with pretty much the exact specs except 1TB SSD and no others. Looks like the radiator mounting was pretty easy for you. I couldn't get it to line up properly no matter what I tried. Got it in the end though.
Getting the side bracket screwed onto the rad needed a little extra effort but other than that it went in smooth as butter.
i did the same thing, first build in over 10 years from intel i7 920 and a big outdated inefficient pc.
Went with mini ITX Z490 by ASRock and i9 10850k. Vengance and 750W same as yours.
I am not so impressed with the speed upgrade from 10 years of generations. I thought it would be faster but then again I am using still my old SATA SSD. Have not upgraded yet to the NVME. But, i thought the processor would perform way faster for 10 years advancments.
Totally understand. I was getting by with my 2600k overclocked to 4.8GHz all those years...
TechHeadPang yes over clocking saved me too . That’s pretty impressive speeds I was able to get my 920 to 4Ghz on the hyper 212+ which I am now using on my i9 on stock settings. Did you overclock
your i9 yet or play with the bios settings ?
I love how much you can fit into that little case.
I have 5 hard drives, 2 M.2s, 2 2.5 HDDs, and one WD Black 3.5. Altogether being 18TB with a radeon 6900xt and a Ryzen 5900x, with thermals never breaking over 75C even when mining
Damn, what a beast of a pc. What do u use it for??
nice built !
I'm catching up to you ;)
Been trying to get at SF Series™ SF750 but it's sold out or overpriced. nice build btw
I know! Thanks to the "Great PSU Shortage" the SF750 was the final part I needed to get to complete this system. I ended up biting the bullet and purchasing from Amazon for about $20 over retail price... best of luck finding one!
@@TechHeadPang like where I bought my case... you can also buy that power supply. the site is shopblt.com, originally I was a little sketch, but this site is great. They order directly from the manufacturer and a lot of people recommend it.
Where did you get those push pin type things they look like they'd be quite good to have.
same here im trying to get the case and psu atm sold out everywhere im trying to get the new coolermaser sfx psus there soooo much cheaper than corsair only gold though over corsairs plat ones but still
@@bryangworek6137 thanks man I ended up getting one backordered from shopBLT and yeah its sketchy but everyone says its good
Honestly how did you get the Corsair 750w psu. I have been waiting to get one for months now lol
pro tip : you can watch movies on Flixzone. I've been using them for watching all kinds of movies these days.
@Landyn Erick Yea, have been using Flixzone} for years myself =)
You should have used 2 separate cables for the additional power connectors on your GPU.
I just ordered my case and I'm hoping to have it here in October. I have the exact same setup but I'm on AMD instead of intel. I'm also trying to fit the 3080 in this little case haha. Good to see the build process. cheers mate
Bryan Gworek where did you order it from I can’t seem to find it in stock anywhere
Sergio Acuña i found mine on shopblt.com but it seems like they order from the manufacturer directly. Apparently mine won’t be coming until October.
I’ve seen the October date on a few sites so that’s probably when they’ll ship the next batch.
I don’t need gpu! It’s ok to build without you?? Normal usage without integrated graphics??
Nice job! I have the same case and same aio but I can't seem to screw the rad to the side panel like you have done. It doesn't fit into the inside recess of the side panel. Seems like the rad is about 1mm too tall.
I am trying to build something similar. I am also using the NR200 Case, B550I AORUS PRO AX and a Ryzen 9 3900X. I am not using a video card as I just needed to power of the CPU but I am adding fans to the top ad bottom of the case ( pulling air from the bottom and exhausting out the top) I also purchased the Kracken X63 but I can't seem to figure out where the connections go. Did you using extenders or splitters for your connections?
Got the cable mgmt down pat
The return of king 👑
Now that practically Nvidia killed the SLI it doesn't make much sense to invest in an ATX motherboard unless the buyer wants to use 4 memory modules but even a Micro ATX has support for 4 memory modules.
I always thought that for games a mobo mini-ITX or micro-ATX is enough.
From what I saw this NR200 is a beautiful case, it seems to be a little too big for a mini-ITX configuration but that's fine.
R.I.P SLI.
Keep seeing new youtube builds with the NR200.. but they're still not available for sale anywhere...
I can't speak to outside the U.S. but I'm starting to feel lucky to have gotten one with my pre-order. Hope you find one soon.
They went OOS pretty fast up here in Canada but I got on board with the pre-order as soon as they allowed it on Amazon. AFAIK they're still taking pre-orders for the NR200P which releases on September 16th so might be the same in your market.
Thank you for this video! What are those grommets you used to mount the SSD?
They came with the case! Super convenient.
May I ask you something, the rad fans, it is better to have it the other way? Like not blowing hot air but sucking fresh from the outside?
That motherboard is not seated right, the built in io shield aint clipped into the spot
Kinda wanna see a rtx 3090 in that case XD
saving and planning as of right now, wish me luck
If you don't mind the language, the Spanish channel of Hardware360 have a build of a 3090 FE in the NR200 and it's insane...
th-cam.com/video/fUm4pWqTP7I/w-d-xo.html
Have you since upgraded to a 3080? If so, which one and we're thr bottom mounted fans an issue?
Hey, awesome video, it was very relaxing! One question though, aren’t the fans on the kraken backwards? Shouldn’t they be on the opposite side for intake and cooling on the radiator? The way you showed on the video, they are just blowing air inside the case and the radiator is getting no cooling at all, I’m sorry if I misinterpreted.
Doesn't matter what orientation the fans have as long as they are drawing air from outside the case and through the radiator. The fans are oriented in "pull" so they are pulling air through the radiator fins from outside. They can also be oriented in "push" (as you are referring to) where the air is pushed through the radiator fins, but there is negligible difference in performance between "push" and "pull". Some will prefer "pull" as the dust will be caught on the radiator surface, making it easier to clean.
Hi thanks for the video I’m doing almost the same build just wondering how you connected the aio pump, radiator and case fans to the 3 headers on the board .
Fan splitter @ 8:03 or a hub
1 fan splitter for each of the 3 headers. Header 1 powers/controls the bottom two fans, header 2 connects to the rad fans, and header 3 connects to the two top fans. AIO pump connects to the CPU fan header next to the 8-pin power connector.
Does your CAM software read the radiator fan speed? I have a similar build but my radiator fan speed does not show up in CAM. Only on Hwinfo64 they show up.
Hey, just wanted to ask where did you install your windows operating system on? Nvme or sdd sata drives? Thankyou!
Never doing this again. I had a hell of a time building this pos
Great build!!! Do you think that is it possible to put 4 SSD in some way into this case??
I think it's possible to fit 3 SSDs into this case (2 on front panel, 1 on PSU shroud) if you use an air cooler.
You can stick 2 SSD's on the PSU cage with double layer tape
@@ThePongo92 in that senes! It is possible attach 4 SSD (2 in the front, and 2 in the PSU, right? Thank you for your answer!
@@CamiloGutierrez yeah, this video shows the 2 SSDs in the PSU:
th-cam.com/video/fUm4pWqTP7I/w-d-xo.html
@@ThePongo92 broo !!! Thanks a lot! This is the perfect video I have been looking for a long time !!!
Wow lol, when was the last time you saw an OCZ VERT drive :-)
Came here to comment the exact same thing. Kinda amazed one of those sandforce drives is still running.
@@humanmale971 i have 2 😆
I know lol its a relic but Windows says its at 100% health apparently...
@@TechHeadPang I Remember talking to Tony from Oct to set them up perfect. Mine still work 😁😁😁
Cant you place the dual radiator on the top? Hows the push/pull configuration?
Nice vid! If you pick up a RTX 3080 FE, please let us know if the rear fan would help given the cooling design of the FE.
The FE is actually better for the other components since most of the heat is exhausted from the back of the PC and the heat pushed by the fan on the back of the card is almost negligeable.
Standard cards just dump all the heat into the chassi.
What will help in all type of cards is the top right fan, the one over the PSU.
those grill fan is also included on the case?
How did you wire the noctuas up to the sys fan? I have a similar setup but for whatever reason the fans run at speed and I cant rev them down even though theyre pwm.
how come you decided against 25mm thick fans in the bottom? looks like there plenty of room there for them or no?
Extra clearance b/c I didn't know how thick the AIB cards would be.
What comes in the box?
Awesome video! For the top fans! Are they intake or exhaust?
Exhaust.
Nice build, I am looking to build a mini itx case rtx 3070 rig once the gpu is out, the only thing, i don't know if you can run raid storage when it comes to mini itx.
I think there shouldn't be any problems, just look for the motherboard specs. As an example AsRock Deskmini as STX also supports Raid options.
@@xsAMOR umm, I just did, you're right, I believe the asus strix mini itx also supports raid.
Nice.
will corsair h115i pro xt 322mm length fit?
I put the H115i Pro XT into my NR200 and it sort of fits...
You can only fit 6 of the 8 total mounting screws into the Radiator mounting plate of the case.
Then getting the rad into the case is the second challenge with its length slightly longer by 1mm - 2mm than the case opening. To get around this, you need to take the top left rail off (@ 2:48 the left top rail with 4 screws). This will allow you to ever so slightly squeeze in past that 1mm. Once in it all fits nice and easy.
@@bjabram9469 thanks, the kraken x63 aio used in this video is 315mm in length and h115i is 322mm. Glade to hear it fits.
Thanks for sharing it. I have the same components. How do you manage the fan connections? Because there are six fans and the motherboard just 3 fans connectors. I believe you use the cpu fan for the pump.
you use a fan hub for multiple fans
or just use splitters
HOW IS THE TEMPS MY GOO SIR?
Hi is it possible to put the KRAKEN 63 to buttom part and vertical GPU?
No, because the Kraken X63 is a 280mm AIO, but the bottom only supports radiators up to 240mm.
Good vid! May I have the songs names?
How much ?
Nice build! I’m using the same stock fans on the top of the case but I’ve been experiencing loud vibration noises, have you come across this too?
I haven't experienced any loud vibration noises. Maybe check that the fans are flush with the anti-vibration pads on the bottom of the top panel.
Hi. would anyone know if the NR200 supports small micro ATX boards? my MSI micro ATX is 22cm x 18cm. on paper, it'll fit (NR200 supports 24x22). Just want to know if someone has done this before i buy one.
There are a reddit threat that goes about that, seems that specific models of mATX motherboards can fit, so you should search that thread
@@ThePongo92 Thanks mate. I completed a NR200 build last month. The MSI B365 pro-vh Micro ATX fits nicely. Always nice to have that extra PCIE slot.
the gpu fans and noctua fans are constantly fighting against each other... noctua is trying to pull and the gpu fans are trying to push, idk if that is something legit, i fix my airflow of my case and i'm getting a 20%increase at the benchmarks!
B-E-A-utiful....
hi, from where did you purchase the case?
Amazon! Preordered around the end of July and it shipped August 15th.
I know I'm late, but did you use many fans splitters or a fan hub at all?
1 fan splitter for each of the 3 fan headers.
hey, did you use something like a fan hub for the 2 noctua fans + the aio?
I used fan splitters! 3 headers on the board for 6 fans total.
Hi, how did you manage those to fans on top? Are those the stock fans? Thanks
They are stock. One came with the case, the other I bought from CM.
Man idk why but I have a hard time believing someone hasn’t found a way to have the AIO mounted on top. It would be so much better. There has to be a way. Not even a slim rad and fans combo wont fit up there?!
It's the fact you have to use those weird proprietary screws to mount anything up there which won't thread through the radiator screw holes
This exactly. They wanted to be special and made it proprietary....
@@TechHeadPang Also if you have an SFXL power supply in there you literally just don't have the room to mount a radiator (I use an SFX L in mine and you can't even fit a normal size fan there isn't enough clearance) though I've heard you may be able to mount a 15mm thick fan I haven't had the chance to try myself though
Are those cables custom? Or are those the ones that come with the psu?
They came with the PSU.
AIO Radiator as an exhaust or intake??
Intake!
fits a normal atx psu, 150mm?
Unfortunately no, only SFX or SFX-L.
There are a official PSU bracket for this case that let you use a full ATX PSU, in the official page of CM you can download the files to print your own bracket.
cool
Do you find that the bottom fans help thermals? I'm assuming you have them set up as intake and the top as exhaust. I've been reading conflicting things online. Also, did you use a fan hub or did the motherboard have enough fan headers?
are the top and bottom fans exhast or intake?
Bottom are intake and top are exhaust.
Hi! How's the aio?
Two years later it's still running like new. Periodically cleaning the computer is super helpful!
Someone forgot to put the io shield on...
These boards have the shield built in. Nothing to install
Can this fit the 3080 with potential good airflow?
Yes optimum tech made a video seeing what itx cases the 3089 fe would work with this was one of those cases this the video th-cam.com/video/J8NXraJiJsU/w-d-xo.html
I’m planning my first pc build just like this! How did you go about connecting all the fans? Are there enough fan headers on the itx motherboard or is a fan controller needed?
Typically 2-3 headers on an itx board. You would need a fan hub which is powered by either molex or sata cables. Most hubs can use the pwm from your motherboard or don't connect it and have them all run at full speed. Depends on your application.
This is the one I use in my nr200 with 7 fans.
www.amazon.com/dp/B077YHLDSP/ref=cm_sw_r_u_apa_i_BTeFFbAVEE3KY
Exhaust and AIO pump connected to the mobo fan headers. The other 6 fans connected to the hub.
Can it fit a 3.5 HDD ?
yes , but it's on the PSU
awww forgot to add damn slim fans. hope i don't need it..
thermals? noise? performance??
What thermals do you get ?
Thinking of making a follow-up video for thermals! Stay tuned.
I got a build in that case too. A 3700x cooled by a fuma 2 with noctua fans at 100% during prime 95 small FFT give me a delta temp of 38c. Same test with an ultra quiet profile, fans runing at 1000 rpm i get 47c delta T.
For the GPU i can't tell i got a crappy GPU waiting for a 3080
No water cool?
why intake hot air from radiator?
Intake fans on the rad is getting fresh air, then exhaust the hot air using the top two fans
shintel build instant dislike
May i know what is the advantage of using gaming itx motherboard and normal itx motherboard?
@@kennethandallan8296 will that means the motherboard chipset and capacitor can last longer?